INSTRUCTIONS OF USE 14
3.
Dismantling the Altea deflector
First extract the stainless-steel
reinforcement. In order to do this, draw it
towards the front of the appliance to
release it from the vermiculite parts.
Figure No.12 - First movement to release the
reinforcement
Then rotate the reinforcement as
shown:
Figure No.13 - Turning the stainless-steel
reinforcement
Let the stainless-steel reinforcement
drop onto the vermiculite deflectors.
Figure No.14 - Reinforcement on the vermiculite
deflectors
The vermiculite deflectors can then be
extracted as shown:
Figure No.15 - Extracting the vermiculite
deflectors
Changing the position of the Altea
stainless-steel reinforcement
The stainless-steel reinforcement has an
open and closed position. When it is
closed, a lot of combustion gas is retained,
meaning that the flue and the fuel used
must be in optimum conditions in order to
ensure correct operation. When open, the
deflector facilitates the passage of smoke.
