15
Listening to music from your
portable player Using an USB device
1 Connect the USB device to
the USB port of the unit.
2 Select the function. FUNCTION
3 Select a file you want to play. UU uu
4 Start your media playing. BBPLAY or ENTER
5 To stop, press xxSTOP
6 Before disconnecting, you have FUNCTION
to change to any other function.
You can enjoy media files saved on an USB device by connecting it to
the USB port of the unit. If you want to operate other function, see the
Playing a Disc or file section.
ON REMOTE
Compatible USB Devices
• MP3 Player: Flash type MP3 player.
• USB Flash Drive: Devices that support USB2.0 or USB1.1.
• The USB function of this unit does not support all USB devices.
USB device requirement
Devices which require additional program installation when you have connected
it to a computer, are not supported.
Look out for the follows
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be searched
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Card readers, Locked devices, or hard type USB devices are
not supported.
• USB port of the unit cannot be connected to PC.
• The unit can not be used as a storage device.
1 Connect the portable player
to the PORT.IN (PORTABLE IN)
connector of the unit.
2 Turn the power on. 11POWER
3 Select the function.
Turn on the portable player and FUNCTION
start it playing.
ON REMOTE
PORT.IN
