22
ow to use washer
H
Refresh
■ Refresh cycle
• For slightly wrinkled clothes which have
been stored for an extended time.
This cycle makes wrinkled clothes easy to iron
(Do not load wet clothes).
• Wrinkles will be reduced.
■ How to use Refresh cycle
1. Turn on the washer and select the Refresh program.
2. Load 5 items or less and close the door.
3. Press the Turbo Steam button repeatedly until
the desired and correct number of items is
displayed. Initial display is 3 items
4. Press the Start/Pause button.
CAUTION:
- Do not reach into the washer while operating.
Steam can cause severe burns.
- Keep pets away from the washer.
[Precautionary Notes]
- The Refresh cycle is not like other washing or
drying cycles.
- After the Refresh cycle is complete, the washer will
tumble the clothes for up to 30 minutes to prevent
rewrinkling.
- Due to the characteristic of cotton fibers, this cycle
is not recommended for 100% cotton clothing.
- Remove stains from clothing before using the
Refresh cycle to prevent permanently setting the
stains by high heat.
- Be sure that the tap is open. This cycle uses a little
water to produce steam.
- Be careful not to touch the door. It can be very hot.
- Do not open the door while operating.
Steam can cause severe burns.
- After removing clothes from the Refresh cycle they
may feel slightly damp wait at least 10 minutes
before putting the clothes on.
- Best result are achieved when articles are of similar
size and fabric type. Do not overload (avoid loading
more than 3 dress shirts if loading up to 5 Items.)
Turbo Steam
• For tough stained clothes,
underwear, or baby clothes.
• Steam Wash is available with
Refresh, Allergy Care, Baby
Care, Cotton, Cotton Quick,
Synthetic.
• This option features upgraded washing
performance with low energy and water
consumption.
• Do not load delicates such as wool, silk,
and easily discolored clothes.
NOTE:
- The concentrated steam wash function is
highly efficient. There should be no visible
water level during the Steam Wash
function.
- Steam spray may not be seen clearly
through the door; however, the washer is
spraying steam strongly inside.
- During the steam operation, a spraying
sound will be heard. This is not a
malfunction.
