526328
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
OWNER’S MANUAL
CLEANING ROBOT
VR6170LVM
Before using, please carefully read the Safety Precautions pages to
allow for safe operation of the product. After reading the operation
manual, please keep it in an easily accessible location.
www.lg.com
FEATURES
Images of the ceiling and floor are obtained from the sensors of the upper
and lower cameras, and through this, the location of Roboking 2.0 will be
confirmed, therefore, elaborate cleaning can be accomplished for every part
of the room.
As the noise levels are at a quiet 60dB(A), cleaning can be performed at
night.
*60dB(A)
Roboking 2.0 memorizes the location for cleaning.
* Minimizes the overlapping of cleaning area
The use of the ultra microfiber mop accessory allows finer dust to be
collected from hard flooring. (option)
The Roboking 2.0 also has voice confirmation and instruction that can be
easily understood by the user.
The Roboking 2.0 has two auto cleaning modes that can be selected by the
user.
*Spatial expantion mode, zigzag mode
Camera sensor
(upper, lower section)
“Please, check
the dust bin.
CONTENTS
Safety precautions
Included with product
Parts description
Button functions
Display status information
Before you start
Overview
1
BEFORE THE USE
2
METHOD OF USE
3
HANDLING METHOD AFTER USE
29~31
32
How to install the home station
How to turn the Roboking 2.0 power supply on & off
How to start and stop cleaning
How to charge the battery
Cleaning modes
Auxiliary cleaning modes
Timer cleaning
Mop cleaning (option)
Location search function
Cleaning the dust bin
Cleaning the dust bin filter
Cleaning the brush
Cleaning the sensor/charging terminal
Cleaning the side brush
Cleaning the ultra microfiber mop (option)
4
ADDITIONAL INFORMATION
5
REFERENCE
2~4
5
6~7
8~9
10
11
12
13
14
15
16~17
18
19
20
21
22
23
24
25
26
27
28
Troubleshooting
Before you call for service
Product specifications
Open source software notice
33
34
2
SAFETY PRECAUTIONS
The purpose of the safety precautions described below is for the user to use the product safely and
correctly to prevent any unexpected risk of injury or damage.
Basic safety precautions
For your safety, do not remove the
battery from the Roboking 2.0. If you
need to replace the battery or the
Roboking 2.0, take it to the nearest
authorized LG Electronics service
center or dealer for assistance.
Failure to follow this warning can
cause fire or product failure.
Make sure the power cord of the
home station is not crushed under a
heavy object or damaged by contact
with sharp objects.
Failure to follow this warning can
cause electric shock, fire or product
failure. If the power cord is broken,
do not plug it in. Take the product
to an LG Electronics Authorised
service repairer.
Do not place the home station and
the Roboking 2.0 near a heating
device.
Doing so can cause product
deformation, fire, or product failure.
Do not force the power plug to
bend. Do not use the power plug
when it has been damaged or
loosened.
Doing so can cause fire or product
failure.
Never use the Roboking 2.0 with a
battery and/or home station from
any other product than the
Roboking 2.0.
Doing so can cause fire or product
failure.
Do not use the Roboking 2.0 when
candles or fragile objects are placed
on the floor.
Doing so can cause fire or product
failure.
Always use a dedicated outlet with
5A or above.
If multiple appliances are connected
to an outlet simultaneously, they
can generate enough heat to cause
a fire.
When pulling out the power plug,
always pull it out by grabbing the
plug, not the cord. When pulling out
the power plug, do not to touch the
prongs with your fingers.
Doing so can cause an electric
shock.
After reading this manual, please keep it in an easily accessible location.
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in
property damage and/or serious bodily harm or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
WARNING
WARNING
CAUTION
3
SAFETY PRECAUTIONS
Do not touch the power plug with
wet hands.
Doing so can cause electric shock.
Do not spray or suck in inflammable
materials, surfactants, or drinking water
in the vicinity of the Roboking 2.0.
Doing so can cause fire or product
failure.
* Inflammable materials: gasoline,
thinner, etc.
* Surfactant: detergent, articles for
bath, etc.
Do not insert any part of the body,
such as a hand or foot, below the
brush or wheels of the
Roboking 2.0 while in use.
Doing so can cause injury or
product damage.
Do not operate the Roboking 2.0
on narrow and high furniture such
as a wardrobe, refrigerator, desk,
table, etc.
Doing so can cause injury, product
failure or damage which is not
covered by the warranty.
Frequently empty the dust bin and
maintain its cleanliness.
The dust collected in the dust
bin can trigger allergies and may
contain harmful insects.
Use the Roboking 2.0 indoors only.
Using it outdoors can cause product
failure and irreparable damage to
the unit.
Close the cover of the dust bin on
the main unit before start cleaning.
If the cover is not closed, it can
cause injury or product damage.
Do not allow children or pets to play
with or rest upon the Roboking 2.0 at
any time. Do not use the Roboking 2.0
while an object is hanging from it.
Doing so can cause injury or
product damage.
Turn the power supply off
immediately if any abnormal sound,
odor, or smoke is generated from
the Roboking 2.0.
Failure to do so can cause fire or
product failure.
Do not operate the Roboking 2.0 in
a room where a child is sleeping.
Doing so can cause injury or
product damage.
Do not leave Children or pets near
the Roboking 2.0 unsupervised.
Doing so can cause injury or
product damage.
Do not drop the Roboking 2.0 or
subject it to strong impacts.
Doing so can cause injury or
product failure not covered by the
warranty.
Do not expose the Roboking 2.0 to
cold temperatures (less than -5°C)
for a long period of time.
Doing so can cause product failure.
Remove any cable or long string on
the floor.
Cable or string can get tangled in
the wheels of Roboking 2.0 and
cause product failure or the cord to
be disconnected.
Gasoline
Detergent
WARNING
CAUTION
4
SAFETY PRECAUTIONS
Check the following items before use:
• Empty the dust bin after if fills up.
• Remove any cables or long strings from the floor.
• Remove any moisture from the floor before cleaning.
• Close the cover of the dust bin before cleaning.
Remove fragile or unnecessary objects from the room to be cleaned.
For example, remove expensive ceramics and valuables from the floor.
• Confirm whether the battery has sufficient power, and if it is low, recharge it.
Close the doors of any room that you do not want the Roboking 2.0 to enter.
During cleaning, the Roboking 2.0 may enter another room and continue cleaning.
• Do not use this product in the room where a child is sleeping alone. The child can be hurt.
Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the
brush.
Cleaning will not proceed smoothly on carpets or rugs with tassels or carpets thicker
than 8 mm (0.315 in). It may be more convenient to rearrange or remove them before using
the product.
CAUTION
In rare cases, the Roboking 2.0’s
brush can damage the carpet. If
this happens, immediately stop the
cleaning operation.
When a carpet has long tassels, the
tassels can be damaged.
Do not let the main unit and
charging terminal of the home
station come into contact with
metallic objects.
Doing so can cause product failure.
Do not put water, detergent, etc.
into the Roboking 2.0.
Doing so can cause product failure.
Do not put any water or detergent
on the Roboking 2.0. If liquids get
inside of the Roboking 2.0, turn off
the power supply and contact an LG
Electronics sales agent or customer
care center.
If the floor is wet or has wet spots,
wipe them up before using the
Roboking 2.0. Do not use the
Roboking 2.0 on a wet surface.
Failure to do so can cause product
failure.
When attaching the mop, do not
block the bottom camera sensor.
Blocking the bottom camera sensor
may not allow the product to work
smoothly.
Do not allow the Roboking 2.0 to
sweep up liquids, blades, thumb
tacks, hot ashes, wooden shavings
etc.
These items can cause product
failure.
Do not put sharp objects into the
opening of the Roboking 2.0’s
supersonic sensor.
Doing so can cause product failure.
Do not use the Roboking 2.0 when
the dust bin is completely filled up.
Doing so can cause product failure.
When the robot cleaner is
operating, it may hit the chair leg,
desk leg, table leg or other narrow
pieces of furniture.
For quicker and better cleaning,
place the dining chairs on top of the
dining table.
Tip
5
INCLUDED WITH PRODUCT
 Figures can be different from actual objects.
Dust bin filter (spare)
Brush for cleaning filter Mop plate Ultra microfiber mop
(2 pieces) (option)
Dry cell for
remote controller
(2 units of AAA size)
Quick guide
Operation manual
Home station
Roboking 2.0
Remote controller
Side brush
(2 pieces)
OWNER’S MANUAL
CLEANING ROBOT
VR6170LVM
Before using, please carefully read the Safety Precautions pages to
allow for safe operation of the product. After reading the operation
manual, please keep it in an easily accessible location.
www.lg.com
6
PARTS DESCRIPTION - Roboking 2.0
 Figures can be different from actual objects.
Plan view
Manipulation button
Dust bin cover button
Dust bin cover
Status indication lamp
Upper camera sensor
Detecting sensor of home station &
receiving sensor of remote controller
Ultrasonic sensor
Obstacle detecting sensor window
Ventilation port
Cliff detection sensor
Charging terminal
Brush
Side brush
Wheel
Lower camera sensor
Mop plate fixing hook
Battery
Power switch
Front view
Rear view
Bottom view
7
PART DESCRIPTION – HOME STATION / DUST BIN
 Figures can be different from actual objects.
Home station
Dust bin
Remote controller holder
Charging terminal
Reset button
Sponge filter
HEPA filter
Dust bin handle
Dust bin cover
Suction port cover
Dust bin cover
opening button
Power cord fixing hook
8
BUTTON FUNCTIONS – Roboking 2.0
• Use the TIMER button to start cleaning after a set amount of time has elapsed.
The timer can be set from 1 to maximum of 12 hours in 1 hour units.
If the timer is set whilst the unit is away from the home station, the cleaning
time will be reduced. Therefore use the product while attached to the home
station as much as possible.
The timer setting is inoperative if there is no dust bin.
• Press this button to change the cleaning mode.
When the product is attached to the home station and when the timer is set,
spot cleaning mode cannot be selected.
TIMER
MODE
HOMING
START/STOP
Press the START/STOP button to turn the Roboking 2.0 on/off or start/stop
cleaning.
Press the START/STOP button while the Roboking 2.0 is on and it will
automatically start cleaning.
If the START/STOP button is pressed during automatic cleaning, the Roboking 2.0
will stop cleaning.
Press and hold the START/STOP button for approximately two seconds to turn
off the Roboking 2.0.
• If the button is pressed while in the timer mode, the reservation will be canceled.
Press the HOMING button to move the Roboking 2.0 to the home station for
battery charging.
When cleaning is complete or the battery is low, the device will automatically
move to the home station to charge the battery even without pressing the
HOMING button.
9
BUTTON FUNCTIONS – REMOTE CONTROL
The Roboking 2.0’s power supply cannot be turned on with the remote control.
• If the main unit is turned off, the remote control will not activate the unit.
To turn the cleaner on from the stand by mode or off during cleaning, use START/STOP
button on the top of Roboking 2.0.
In order to do spot cleaning, timer cleaning, zigzag cleaning, and spatial expansion cleaning,
you must first stop the operation of the Roboking 2.0.
Start
The Roboking 2.0 will start
cleaning
Charging
The Roboking 2.0 will move to the
home station for charging.
Timer
The timer can be set from 1-12
hours in the future. (Page 20)
Stop
If the Roboking 2.0 is in operation
it will be stopped.
If it has been set for timer cleaning,
the reservation will be canceled.
Zigzag cleaning
Cleaning will be performed by
the Roboking 2.0 in the zigzag
traveling fashion. (Page 18)
Spot Cleaning
Cleaning will concentrate
within a space of about 1 m
(3.28 ft). (Page 19)
Directional button
The Roboking 2.0 will move
as desired by the user: to
front, rear, left, and right
sides for cleaning.
Cell by Cell cleaning
The Roboking 2.0 will clean
using the spatial expansion
style.
(Page 18)
Tip
18
CLEANING MODES
With zigzag cleaning, the total of the cleaning area will be
cleaned with the repetition of zigzag traveling.
If rapid cleaning is desired, use zigzag cleaning.
When pressing ‘ZIGZAG’ button on the remote controller,
zigzag cleaning will be started while zigzag cleaning icon is
indicated by the indication lamp.
With spatial expansion cleaning, the cleaning will be
performed by dividing the cleaning area into partial square
spaces.
If elaborate cleaning is desired, use spatial expansion
cleaning.
When pressing ‘Cell by Cell’ button on the remote
controller, spatial expansion cleaning will be started
while spatial expansion cleaning icon is indicated by the
indication lamp.
The 1st stage:
The maximum outline of 3m x 3m of cleaning area
will be cleaned. (The size of outline will be changed in
accordance with the shape of the house inside.)
The 2nd stage:
Inside of the outline will be cleaned with zigzag traveling.
When the 1st, 2nd stages are completed, the inside of
the cleaning area will be cleaned through the repetition of
above cleaning method as the device is being moved to
the next cleaning area.
Once set up, the cleaning mode will be kept in memory even after the power supply is
turned off.
During operation, if a mode change is required, press the STOP button and then select the
mode.
Zigzag Cleaning
Spatial Expansion Cleaning
Tip
27
CLEANING THE SIDE BRUSH
Foreign objects/materials such as hair can easily adhere to the side
brush. Remove such materials at least once a week.
If excessive amounts of foreign materials are stuck to the brush,
there is the risk of damage to the brushes.
If the floor is rough or skirting boards are frequently cleaned, the side brush may bend or become
damaged. In this case, use the following method to straighten the side brush.
1. The following procedure is helpful in restoring
deformed brushes.
2. Turn off the power supply by pressing the
START/STOP button on the Roboking 2.0 for two
seconds.
3. Place the Roboking 2.0 at the end of a table to
make cleaning the side brush easier. Make sure
that the Roboking 2.0 is not in danger of falling.
4. Soak the side brush in warm water.
5. Press down on the side brush for about ten
seconds so that it is completely submerged in
the water.
6. Slowly wipe the side brush by sliding it through
your hand.
7. Rotate the side brush and repeat steps 4-6 for
each section of the brush.
8. Use the side brush only after it has completely
dried.
1. Remove the screw and separate the side brush.
2. Exchange and re-assemble new side brushes.
How to change the side brush
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LG VR6170LVM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LG VR6170LVM in de taal/talen: Engels als bijlage per email.

De handleiding is 23,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van LG VR6170LVM

LG VR6170LVM Gebruiksaanwijzing - Deutsch - 40 pagina's

LG VR6170LVM Gebruiksaanwijzing - Deutsch, English, Français, Italiano - 39 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info