815648
10
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
10
When Installing Behind the TV Screen
1. Place the Zero Connect Box lower than the wireless receiver of the
TV screen.
2. Before turning on the TV, ensure that the front LED of the Zero Connect
Box is facing the wireless signal receiver of the TV screen.
3. If the front LED is not facing the wireless signal receiver of the TV screen,
turn the dial on the top of the Zero Connect Box left or right to adjust the
direction of the sliding button to face the wireless signal receiver.
4. Adjust the sliding button on the Zero Connect Box in the opposite
direction of the top LED.
Once the dial and sliding button adjustments are completed, the signal
transmission and reception path should be in the green direction shown
in the figure.
5. After turning on the TV, check if the top LED colour of the Zero Connect
Box is blue.
If the LED is not blue, adjust the dial and sliding button further to
optimise the signal condition.
Ensure that there are no obstacles in the antenna transmission path.
Install the Zero Connect Box within 1m of the TV screen. (provided that
there are no obstacles in the way.)
Position the Zero Connect Box between the legs of the floor stand so it
is not obstructed.
Connecting External Terminals
You can connect external devices such as cables, HDMI, and set-top boxes to
the TV. Press the Input button ( ) on the remote control, select [Home
Hub], and find the device you wish to connect from the menu displayed on
the screen.
When used with an external device using a 60GHz frequency, the screen
may fail to display due to mutual interference.
Set the appropriate resolution and frequency for the connected device.
Failure to do so may cause straining of the eyes.
The detailed installation method may vary depending on the TV model.
Installing Antenna/Cable
Insert the coaxial cable that transmits audio/video signals into the
antenna/cable input terminal or antenna input terminal on the back of
the Zero Connect Box.
Be careful not to bend the copper wire when connecting the coaxial
cable.
Use a signal amplifier if the signal is weak.
When using one antenna for two or more TVs, use a signal splitter.
Note
Do not apply oil or lubricant to the screws used during installation.
Doing so may cause the TV to malfunction.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable
(75Ω). (Depending on model)
HDMI
Use an HDMI certified cable (less than 3m) with the HDMI logo (high-
Speed HDMI®/™ cable).
Turn off the power of the TV and all connected devices, and unplug them
from the socket before connecting the HDMI cable.
Connecting a device that supports the HDMI Ultra HD Deep Colour
feature to the TV will provide a clearer image. If you connect a device
that does not support this feature and enable the feature, it may not
work properly. If problems arise, change the settings.
Note
HDMI audio support formats may vary depending on the TV model.
HDMI devices should have bezels less than 10mm thick and 18mm
width.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LG OLED97M39 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LG OLED97M39 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van LG OLED97M39

LG OLED97M39 Gebruiksaanwijzing - Nederlands - 20 pagina's

LG OLED97M39 Gebruiksaanwijzing - Deutsch - 20 pagina's

LG OLED97M39 Gebruiksaanwijzing - Français - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info