Recording
11
Hookup and
Settings
Hookup and Settings
Making system connections
Turn off your unit before you set the VIDEO OUT
SELECTOR. When using the COMPONENT VIDEO
OUT jacks, set the VIDEO OUT SELECTOR to
COMP. When using the SCART jack, set the VIDEO
OUT SELECTOR to SCART.
Caution
Do not plug the active subwoofer into an AC
power(mains) outlet until all the components are
connected.
Connecting the active subwoofer to the unit
Connect one end of the system cable (S1) into the
SYSTEM jack on the rear of the unit. Connect the
other end of the system cable (S1) into the SYSTEM
(DVDP) jack on the rear of the active subwoofer.
Tighten both screws on the connector.
Note:
The jacks for the system cable are keyed so that the
cable connectors only connect in one way.
Connecting the speakers to the active
subwoofer
1. Connect one end of the speaker cable (S2) into
the FRONT SPEAKER (4Ω) jack on the rear of the
active subwoofer. Tighten both screws on the
connector.
2. Connect the L (left) speaker cable (S2) into the
rear jack of the left speaker. Connect the R (right)
speaker cable (S2) into the rear jack of the right
speaker.
Note:
Make sure cable connectors are fully inserted and
seated firmly in the speaker jacks.
Connecting the supplied antennas
The rear of the active subwoofer provides jacks for
the AM and FM antennas included with your system.
Note:
An outdoor antenna may be used in place of the
supplied indoor antennas. To add an outdoor antenna,
consult a qualified installer.
Follow all safety instructions supplied with the
antenna.
FM antenna
Connect the FM antenna into the FM jack on the rear
of the active subwoofer. Spread out the antenna arms
and move them around to establish optimum FM
reception. Extend the antenna as far from the unit and
other equipment as possible.
AM antenna
Connect the AM loop antenna into the AM jack on the
rear of the active subwoofer. Place the antenna loop
away from the unit and other equipment as
possible.Stand it on the supplied base or mount it to a
wall.
