ADVANCED FUNCTIONS
15
ENGLISH
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1 Press
G
.
Turn on/off the Display screen.
Silent mode
It is to prevent potential claims by neighbors,
reducing noise from outdoor units.
The outdoor unit sound pressure in cooling
and heating mode is decreased by 3dB com-
pared to the rated sound pressure
1 Press | to turn the power on.
2 Press
C
.
-
I is displayed on the display screen.
Active Energy Control mode
It brings the effect of the power saving.
(Setting available in air cooling mode)
1 step : The power Input in cooling mode is
decreased by 20% compared to rated
power Input
2 step : The power Input in cooling mode is
decreased by 40% compared to rated
power Input
NOTE
!
•
Setting available only under operation-ON
Silent Mode and E/Control are not avail-
able at the same time. If E/Control is
pressed under Silent Mode, Silent Mode is
released and E/Control works.
• Capacity may decrease when outdoor
unit silent mode is selected.
• In Air Circulation, Humidity mode, this
function cannot be used.
NOTE
!
• In Cooling mode, this function can be
used.
• Every time Active E/Control on wireless
remote controller is pressed, 1Step,
2Step, functions release are repeated
and switched Wanted temperature ap-
pears for 5 sec.
• Capacity may decrease when outdoor
unit Active Energy Control mode is se-
lected.
NOTE
!
This function may not be supported,
depending on the model.
Silent Mode Function available under the
below temperature set
- Cooling-possible temperature range: Indoor
18°C ~ 30°C, Outdoor 18°C ~ 43°C
- Heating-possible temperature range: Indoor
16°C ~ 30°C, Outdoor 6°C~ 24°C
Active Energy Control mode Function avail-
able under the below temperature set
- Cooling-possible temperature range:
Indoor 18°C ~ 30°C, Outdoor 21°C ~ 32°C
1 Step Entrance
2 Step Entrance
1 Press | to turn the power on.
2 Press
B
.
-
J is displayed on the display screen.