16 Air Conditioner
Operating Instructions
The Upper Horizontal Vane can be adjusted by using the remote controller.
1. Press the ON/OFF button to start the unit.
2. Press the UPPER HORIZONTAL VANE CONTROL button.
Each time the button is pressed, the air-flow
direction is changed in the direction of the arrow.
The Floor Heating Mode can be controlled by using the remote controller.
1. Press the ON/OFF button to start the unit.
2. Open the cover of the remote controller.
Select heating operation.
3. Press the FLOOR HEATING MODE button.
4. To cancel the floor heating mode, press the FLOOR HEATING MODE
button again and unit will operate in previous mode.(Heating mode)
This mode will close the upper horizontal vane, concentrate the hot air to bottom discharge. ( But it can make noise,
so use it if you want quick heating.)
Floor Heating Mode is available only heating mode.(2 vane Mode)
While Auto Swing Mode is operating, upper vane will not close in Floor Heating Mode.
When upper vane is set other position except default, Floor Heating Mode work after 1 min.
Upper Horizontal Vane Control
Floor Heating Mode
Press the UPPER HORIZONTAL VANE CONTROL button once more during Auto Swing at the direction of airflow you want.
•
Manually moving the Upper Horizontal Vane by hand could damage the mechanism.When the unit is shut
off, the the Upper Horizontal Vane will close the air outlet vent of the product.
When you restart the unit, Upper Horizontal Vane will be located as you selected before.
Jet Cool Operation
Jet cool function can be used to cool the room quickly in hot
summer. When this function is turned on, the air conditioner
Runs in cooling operation mode with super high fan speed and
18°C setting temperature for fast and effective cooling.
• Jet cool function cannot be activated during Auto Changover
Operation or Heating Mode.