639989
103
Verklein
Vergroot
Pagina terug
1/220
Pagina verder
www.lg.com
OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or regis-
tered trademarks of HDMI Licensing LLC.
Wall Mounting Bracket
Separate purchase
(19/22/26/32LD3
***
,
32LD4
***
, 32LD5
***
,
19/22/26/32LE3
***
,
32LE4
***
, 22/26LE5
***
,
32LE5
***
)
LSW100B or
LSW100BG
(37/42/47LD4
***
,
42/46LD5
***
,
37/42LE4
***
,
37/42/47LE5
***
)
LSW200B or
LSW200BG
(52/60LD5
***
,
55LE5
***
)
LSW400B or
LSW400BG
Wireless Media Box
(32/42/46/52/60LD5
***
,
32/37/42LE4
***
,
32/37/42/47/55LE5
***
)
I
CONTENTS
CONTENTS
PREPARATION
LCD TV Models : 19/22/26/32LD3
***..............A-1
LCD TV Models : 32/37/42/47LD4
***............A-14
LCD TV Models : 32/42/46/52/60LD5
***
......A-24
LED LCD TV Models : 19/22/26/32LE3
***
, 32/37/
42LE4
***
, 22/26LE5
***,
32/37/42/47/55LE5
***
...... A-33
EXTERNAL EQUIPMENT SETUP
Antenna Connection ............................................1
Connecting with a Component cable
..................2
Connecting with an HDMI cable
.........................3
Connecting with an HDMI to DVI cable
..............4
Connecting with a Euro Scart cable
...................5
Usb setup
............................................................6
Connecting with a RF Cable
...............................6
Connecting with a RCA cable
.............................7
Connecting with a D-sub 15 pin cable
................8
Insertion of CI Module
.........................................9
Headphone Setup
...............................................9
Digital audio out Setup
......................................10
External Equipment WIreless Connection
........11
Supported Display Resolution
...........................12
Screen Setup for PC mode
...............................13
WATCHING TV / PROGRAMME CON-
TROL
Turning on the TV .............................................17
Initializing Setup
...............................................17
Programme Selection
........................................17
Volume Adjustment
...........................................17
Quick Menu
.......................................................18
On Screen Menus Selection and adjustment
...19
Auto programme tuning
...................................20
Cable DTV setting
.............................................25
Manual programme Tuning
...............................26
Programme Edit
...............................................30
CI [Common Interface] Information
...................34
Software Update
...............................................35
Picture/Sound test
.............................................37
Diagnostics
........................................................38
Product/service information...............................39
Simple Manual
..................................................40
Selecting the Programme List
...........................41
Input List
............................................................43
Input Label
........................................................44
Data Service
......................................................45
SIMPLINK
..........................................................46
AV Mode
............................................................50
Initializing(Reset to original factory settings)
....51
TO USE A USB DEVICE
When connecting a USB device .......................52
Movie list
..........................................................54
Photo list
............................................................65
Music list
............................................................75
DivX Registration Code
....................................84
Deactivation
.....................................................85
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch on/off EPG .............................................87
Select a programme
..........................................87
Button Function in NOW/NEXT Guide Mode
...87
Button Function in 8 Day Guide Mode
.............88
Button Function in Date Change Mode
............89
Button Function in Extended Description Box
..89
Button Function in Record/Remind Setting Mode 90
Button Function in Schedule List Mode ............91
II
CONTENTS
CONTENTS
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................92
Picture Wizard
...................................................94
Energy Saving
...................................................95
Preset Picture Settings
.....................................96
Manual Picture Adjustment
...............................97
Picture Improvement Technology
......................98
Expert Picture Control
.......................................99
Picture Reset
...................................................102
Trumotion
........................................................103
Power Indicator
..............................................104
Mode Setting
...................................................105
Demo Mode
.....................................................106
SOUND & LANGUAGE CONTROL
Auto Volume Leveler .......................................107
Clear Voice II
...................................................108
Preset Sound Settings-Sound Mode
..............109
Sound Setting Adjustment -User Mode
..........110
Infinite Sound
..................................................110
Balance
........................................................... 111
TV Speakers On/ Off Setup
............................112
DTV Audio Setting (in digital mode only)
........113
Selecting Digital Audio out
..............................114
Audio Reset
.....................................................115
Audio Description (In digital mode only)
.........116
I/II
-
Stereo/Dual Reception (In Analogue Mode Only) 117
- NICAM Reception (In Analogue Mode Only) 118
- Speaker Sound Output Selection ................118
On-Screen Menu Language / Country Selection 119
Language Selection ........................................120
TIME SETTING
Clock Setup .....................................................122
Auto on/off time setting
...................................123
Sleep Timer setting
.........................................124
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................125
Block Programme
............................................126
Parental Control (In Digital Mode only)
...........127
External Input Blocking
...................................128
Key Lock..........................................................129
TELETEXT
Switch on/off ...................................................130
SIMPLE Text....................................................130
TOP Text..........................................................131
FASTEXT
........................................................131
Special Teletext Functions
..............................132
DIGITAL TELETEXT
Teletext within Digital Service .........................133
Teletext in Digital Service
................................133
APPENDIX
Troubleshooting ...............................................134
Maintenance
....................................................136
Product Specifications
.....................................137
IR Codes
.........................................................148
External Control Device Setup
........................149
Open source software notice
..........................156
A-1
PREPARATION
PREPARATION
ACCESSORIES
LCD TV MODELS : 19/22/26/32LD3
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual Batteries
(AAA)
Remote Control
Power Cord
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polish-
ing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
Ferrite Core
(
This item is not included
for all models.
)
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
Protection Cover
Only 19/22LD3
***
Cable Holder
1-screw for stand fixing
Bolts for stand assembly
Protection Cover
Only 26/32LD3
***
(M4x20)
x 8
A-2
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
Image shown may differ from your TV.
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
VOLUME
PROGRAMME
OK
MENU
INPUT
POWER
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
Remote Control Sensor
SPEAKER
Only 26/32LD3
***
PROGRAMME
VOLUME
MENUPOWER
OKINPUT
Only 19/22LD3
***
A-3
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4 6 7
5
9 10
8
11
12
13
Only 19/22LD3
***
A-4
PREPARATION
PREPARATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4 5 6
8 9
7
Only 26LD3
***
10
11
2
12
13
13
A-5
PREPARATION
Only 32LD3
***
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB IN Input
Connect the output from a PC.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
13
2
3 4 5 6
7 98
10
11
2
12
13
1
A-6
PREPARATION
PREPARATION
STAND INSTALLATION
Only 19/22LD3
***
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
Only 26/32LD3
***
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
1
3
4
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
2
A-7
PREPARATION
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover.
NOT USING THE DESK-TYPE STAND
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Only 19/22LD3
***
Loose the bolts from TV.
2
Detach the stand from TV.
3
Insert the Protection Cover into the TV.
After removing the protection paper from
the protection cover, adhere it to the TV as
shown.
4
Protection Cover
Insert the Protection Cover into the TV until
clicking sound.
Only 26/32LD3
***
Protection Cover
A-8
PREPARATION
PREPARATION
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section.
1
Open the Cable Management Clip as
shown.
2
Fit the Cable Management Clip as shown.
3
Only 26/32LD3
***
Cable Management Clip
BACK COVER FOR WIRE ARRANGEMENT
Image shown may differ from your TV.
NOTE
Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Only 19/22LD3
***
After connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
Cable Holder
A-9
PREPARATION
SWIVEL STAND
(Except for 19/22LD3
***
)
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
POSITIONING YOUR DISPLAY
(Only 19/22LD3
***
)
Image shown may differ from your TV.
Adjust the position of the panel in various ways
for maximum comfort.
• Tilt range
ATTACHING THE TV TO A
DESK
(Only 26/32LD3
***
)
Desk
Stand
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw ( provided as parts of the product)
A-10
PREPARATION
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
2
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
NOTE
The Kensington Security System is an optional
accessory.
If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distor-
tion effects on the screen.
A-11
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a
wall.
We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
DESKTOP PEDESTAL
INSTALLATION
Model
VESA
(A
*
B)
Standard
Screw
Quantity
19/22LD3
***
26/32LD3
***
100
*
100
200
*
100
M4
M4
4
4
10 cm
10 cm
10 cm
10 cm
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
A-12
PREPARATION
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide.
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
1
A-13
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List).
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
A-14
PREPARATION
PREPARATION
ACCESSORIES
LCD TV MODELS : 32/37/42/47LD4
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual
Batteries
(AAA)
Remote Control
Power Cord
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polish-
ing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
Ferrite Core
(
This item is not included
for all models.
)
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
Bolts for stand assembly
1-screw for stand fixing
(Only 32/37/42LD4
***
)
x 8
(M4x20)
(Only 32/37/
42/47LD45
**
)
Protection
Cover
x 4
(M4x20)
(Only 32/37/
42/47LD42
**
)
or
A-15
PREPARATION
FRONT PANEL CONTROLS
Image shown may differ from your TV.
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
SPEAKER
Only 32/37/42/47LD45
**
A-16
PREPARATION
PREPARATION
Only 32/37/42/47LD42
**
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is
switched on.
SPEAKER
A-17
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB IN Input
Connect the output from a PC.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
2
3 4 5 6
7 98
10
11
2
12
13
A-18
PREPARATION
PREPARATION
STAND INSTALLATION
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
3
4
Assemble the parts of the Stand Body with
the Cover Base of the TV.
2
Stand Body
Cover Base
Only 32/37/42/47LD45
**
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
2
3
Only 32/37/42/47LD42
**
A-19
PREPARATION
BACK COVER FOR
WIRE ARRANGEMENT
Image shown may differ from your TV.
NOTE
Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Connect the cables as
necessary.
To connect additional
equipment, see the
EXTERNAL EQUIPMENT
SETUP section.
1
Open the Cable Management Clip as
shown.
2
Cable Management Clip
Fit the Cable Management Clip as shown.
3
Image shown may differ from your TV.
When installing the wall-mounted unit,
use the protection cover.
NOT USING THE
DESK-TYPE STAND
Insert the Protection
Cover into the TV until
clicking sound.
Protection Cover
ATTACHING THE TV TO A
DESK
(Only 32/37/42LD4
***
)
Desk
Stand
Image shown may differ from your TV.
The TV must be attached to desk so it cannot
be pulled in a forward/backward direction,
potentially causing injury or damaging the
product. Use only an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw
( provided as parts of the product)
A-20
PREPARATION
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on
the wall. Match the height of the bracket
that is mounted on the wall.
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the
TV.
To use the TV safely make sure that the
height of the bracket on the wall and on the
TV is the same.
NOTE
The Kensington Security System is an
optional accessory.
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some temporary
distortion effects on the screen.
2
10 cm
A-21
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power Supply
Circuit breaker
EARTHING
Ensure that you connect the earth wire to
prevent possible electric shock. If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to
telephone wires, lightening rods or gas pipes.
DESKTOP PEDESTAL
INSTALLATION
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a
wall.
We recommend that you purchase a wall
mounting bracket which supports VESA stan-
dard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
Model
VESA
(A
*
B)
Standard
Screw
Quantity
32LD4
***
37/42/47LD4
***
200
*
100
200
*
200
M4
M6
4
4
10 cm
10 cm
10 cm
10 cm
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
The surface that wall mount is to be mounted
on should be of sufficient strength to support
the weight of TV set; e.g. concrete, natural
rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information, refer
to the instructions included with the mount.
LG is not liable for any accidents or damage to
property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is
used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
Image shown may differ from your TV.
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
10 cm
A-22
PREPARATION
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide.
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
1
A-23
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List).
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
A-24
PREPARATION
PREPARATION
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
ACCESSORIES
LCD TV MODELS : 32/42/46/52/60LD5
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual
Ferrite Core
(
This item is not included
for all models.
)
Power Cord
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any
stains or fingerprints
on the surface of the
TV with the polishing
cloth.
Do not use exces-
sive force. This may
cause scratching or
discolouration.
1-screw for stand fixing
(Only 32/42LD5
***
)
Protection
Cover
Bolts for stand assembly
x 8
M4 x 20
Batteries
(AAA)
Remote Control
A-25
PREPARATION
FRONT PANEL CONTROLS
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Image shown may differ from your TV.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is
switched on.
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
SPEAKER
A-26
PREPARATION
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
WIRELESS Control
Connect the Wireless Media Box to the
WIRELESS CONTROL jack on the TV.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
2
3
64 5 7
98
11
2
12
13
14
10
A-27
PREPARATION
STAND INSTALLATION
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
Image shown may differ from your TV.
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened
fully, the product can tilt forward after the product
installation.) If you tighten the bolt with excessive
force, the bolt can deviate from abrasion of the
tightening part of the bolt.
BACK COVER FOR
WIRE ARRANGEMENT
Image shown may differ from your TV.
1
3
4
NOTE
Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section.
1
Open the Cable Management Clip as
shown.
2
Cable Management Clip
Fit the Cable Management Clip as shown.
3
Assemble the parts of the Stand Body with
the Cover Base of the TV.
2
Stand Body
Cover Base
A-28
PREPARATION
PREPARATION
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the Protection Cover into the TV until
clicking sound.
NOT USING THE
DESK-TYPE STAND
ATTACHING THE TV TO A
DESK
(Only 32/42LD5
***
)
Desk
Stand
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw
( provided as parts of the product)
Protection Cover
A-29
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
3
Use the eye-bolts or TV brackets/bolts to fix
the product to the wall as shown in the pic-
ture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
1
2
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the
TV.
To use the TV safely make sure that the
height of the bracket on the wall and on the
TV is the same.
NOTE
The Kensington Security System is an
optional accessory.
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some tempo-
rary distortion effects on the screen.
2
A-30
PREPARATION
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a
wall.
We recommend that you purchase a wall
mounting bracket which supports VESA stan-
dard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
DESKTOP PEDESTAL
INSTALLATION
10 cm
10 cm
10 cm
10 cm
Model
VESA
(A
*
B)
Standard
Screw
Quantity
32LD5
***
42LD5
***
46LD5
***
52LD5
***
60LD5
***
200
*
100
200
*
200
200
*
200
400
*
400
400
*
400
M4
M6
M6
M6
M6
4
4
4
4
4
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
A-31
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
1
A-32
PREPARATION
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List).
AD
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
Switches the Audio Description On or Off.
A-33
PREPARATION
ACCESSORIES
LED LCD TV MODELS : 19/22/26/32LE3
***
, 32/37/42LE4
***
,
22/26LE5
***
, 32/37/42/47/55LE5
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual Batteries
(AAA)
Remote Control
Ferrite Core
(
This item is not included
for all models.
)
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any
stains or fingerprints on
the surface of the TV
with the polishing cloth.
Do not use excessive
force. This may cause
scratching or discolou-
ration.
Power Cord
Only 19/22/26LE3
***
,
22/26LE5
***
Cable Holder
DC Adapter 4-Ring spacers
(Only 26LE3
***
,
26LE5
***
)
Bolts for stand assembly
(M4x14)
x 4
(M4x20)
(Only 26LE3
***
,
26LE5
***
)
x 4
Use of ferrite core (This feature is
not available for all models.)
Ferrite core can be used to reduce the elec-
tromagnetic wave when connecting the
power cord.
The closer the location of the ferrite core to
the power plug, the better it is.
Install the power plug closely.
Only 32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
Cable Holder
Bolts for stand assembly
(M4x26)
(Only
47/55LE5
***
)
x 4
(M4x16)
x 4
Component gender cable,
AV gender cable
x 2
1-screw for stand
fixing
(Only 32LE3
***
,
32LE4
***
, 32LE5
***
)
(M4x22)
(Only
32LE3
***
,
32LE4
***
,
32LE5
***
)
x 4
(M4x24)
(Only
37/42LE4
***
,
37/42LE5
***
)
x 4
or
A-34
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Image shown may differ from your TV.
SPEAKER
OK
PROGRAMME
INPUT
VOLUME MENU POWER
Only 19/22/26LE3
***
, 22/26LE5
***
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
Touch Sensor
You can use the desired button
function by touching.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Only 32/37/42LE4
***
VOLUME MENU POWER
OK
PROGRAMME
INPUT
Power/Standby Indicator
Note: You can turn the Power Indicator on
or off in the OPTION menu.
Only 32LE3
***
, 32/37/42/47/55LE5
***
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Only 32/37/42LE4
***
, 32/37/42/47/55LE5
***
A-35
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
DC ADAPTER PORT
Connect to the power cord socket.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3 5 6
4
8 9 10
7
11
12
13
Only 19/22LE3
***
, 22LE5
***
A-36
PREPARATION
PREPARATION
Only 26LE3
***
, 26LE5
***
Image shown may differ from your TV.
DC ADAPTER PORT
Connect to the power cord socket.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3 5 6
4
8 9 10
7
ANTENNA
IN
L/MONO
R
AUDIO
VIDEO
AV IN 2
DC IN
2
1
HDMI/DVI IN
(RGB)
USB IN
HDMI
IN 3
H/P
11
12
13
7
A-37
PREPARATION
Only 32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
Image shown may differ from your TV.
2
3
4 5
7 8 11
9 10
1
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
WIRELESS CONTROL
Connect the Wireless Media Box to the
WIRELESS CONTROL jack on the TV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
CAUTION
Use a product with the following
thickness for optimal connection to
HDMI cable (Only HDMI IN 4) /
USB device.
*A 10 mm
6
12
13
14
2
10
A-38
PREPARATION
PREPARATION
Only 26/32LE3
***
, 32/42/47LE4
***
,
26LE5
***
, 32/37/42/47/55LE5
***
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
3
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand
Body
Stand
Base
STAND INSTALLATION
Only 19/22LE3
***
, 22LE5
***
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
3
4
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
M4 X 14
Assemble the parts of the Stand Rear
Cover with the TV.
4
Stand Rear
Cover
Fix the 4 bolts securely using the holes in
the back of the TV.
5
M4 X 14
(Only 26LE3
***
,
26LE5
***
)
M4 X 16
(Only 32LE3
***
,
32/37/42LE4
***
,
32/37/42/47/55LE5
***
)
M4 X 22(Only 32LE3
***
,
32LE4
***
, 32LE5
***
)
M4 X 24(Only 37/42LE4
***
,
37/42LE5
***
)
M4 X 26 (Only 47/55LE5
***
)
M4 X 20
(Only 26LE3
***
,
26LE5
***
)
A-39
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Image shown may differ from your TV.
After connecting the cables as necessary,
install Cable Holder as shown and bundle the
cables.
Cable Holder
Only 19/22/26LE3
***
,
22/26LE5
***
1
After connecting the cables as necessary,
install Cable Holder as shown and bundle
the cables.
Secure the power cord with the Cable
Holder on the TV back cover.
It will help prevent the power cable from
being removed by accident.
2
Cable Holder
Cable Holder
Only 32LE3
***
, 32/37/42LE4
***
,
32/37/42/47/55LE5
***
A-40
PREPARATION
PREPARATION
ATTACHING THE TV TO A
DESK
(Only 32LE3
***
, 32LE4
***
, 32LE5
***
)
Desk
Stand
Ima4e shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw
( provided as parts of the product)
DESKTOP PEDESTAL
INSTALLATION
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
SWIVEL STAND
(Only 26/32LE3
***,
32/37/42LE4
***,
26LE5
***,
32/37/42/47/55LE5
***
)
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
CONNECTION OF TV
(Only 19/22/26LE3
***,
22/26LE5
***
)
Image shown may differ from your TV.
1
2
3
Connect the antenna cable to the antenna
input port on the TV.
Connect the DC adapter plug to the power
input jack on the TV.
Connect the power cord to the DC adapter
first, then plug the power cord into the wall
power outlet.
CAUTION
Please be sure to connect the TV to the DC
power adapter before connecting the TV's power
plug to a wall power outlet.
DC Adapter
A-41
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix
the product to the wall as shown in the pic-
ture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on
the wall. Match the height of the bracket
that is mounted on the wall.
Use a sturdy rope to tie the product for
alignment. It is safer to tie the rope so it
becomes horizontal between the wall and
the product.
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the
TV.
To use the TV safely make sure that the
height of the bracket on the wall and on the
TV is the same.
NOTE
The Kensington Security System is an
optional accessory.
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some temporary
distortion effects on the screen.
2
A-42
PREPARATION
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
Place the ring spacers on the set before
installing the wall mounting bracket so that
the inclination of the backside of the set can
be adjusted perpendicularly.
< Only 26LE3
***,
26LE5
***
>
4-Ring spacers
Image shown may differ from your TV.
Model
VESA
(A
*
B)
Standard
Screw
Quantity
19/22/26LE3
***
32LE3
***
32LE4
***
37/42LE4
***
22/26LE5
***
32LE5
***
37/42/47LE5
***
55LE5
***
100
*
100
200
*
100
200
*
100
200
*
200
100
*
100
200
*
100
200
*
200
400
*
400
M4
M4
M4
M6
M4
M4
M6
M6
4
4
4
4
4
4
4
4
A-43
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
Image shown may differ from your TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide.
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
1
1
A-44
PREPARATION
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List or Movie List).
AD
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
Switches the Audio Description On or Off.
2
2
2
1
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
(VHF, UHF)
Wall
Antenna
Socket
RF Coaxial Wire (75
)
Antenna
UHF
Signal
Amplifier
VHF
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
2
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A COMPONENT CABLE
To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47LD4
***
models.
Image shown may differ from your TV.
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as
shown below.
HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p
O
(50 Hz / 60 Hz only)
O
(24 Hz / 30 Hz /
50 Hz / 60 Hz)
Component ports on the TV Y PB PR
Video output ports
on DVD player
Y P
B PR
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
1
Connect the video outputs
(
Y, PB, PR
)
of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
2
Connect the audio output of the external equip-
ment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
3
Turn on the external equipment.
(
Refer to the external equipment's manual for
operating instructions.)
4
Select the Component input source using the
INPUT button on the remote control.
1
2
1
2
or
3
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI CABLE
CONNECTING WITH A COMPONENT CABLE
NOTE
The TV can receive video and audio signals simultaneously when
using an HDMI cable.
If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
Check that your HDMI cable is High Speed HDMI Cable. If the HDMI
cables are not High Speed HDMI Cable, flickering or no screen dis-
play can result. Please use the High Speed HDMI Cable.
1
Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to HDMI/DVI IN 1, HDMI IN 2 (Except for
19/22LD3
***
), HDMI IN 3 (Except for 19/22/26/32LD3
***
,
32/37/42/47LD4
***
, 19/22LE3
***
, 22LE5
***
) or HDMI IN 4 (Only
32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
) jack on the
TV.
2
Turn on the external equipment.
(
Refer to the external equipment's manual for operating instruc-
tions.)
3
Select HDMI1, HDMI2 (Except for 19/22LD3
***
), HDMI3
(Except for 19/22/26/32LD3
***
, 32/37/42/47LD4
***
,
19/22LE3
***
, 22LE5
***
) or HDMI4 (Only 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
) input source using the
INPUT button on the remote control.
1
4
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI TO DVI CABLE
1
Connect the digital set-top box or the DVI out-
put of the PC to HDMI/DVI IN 1 jack on the
TV.
2
Connect the audio output of the digital set-top
box or the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the digital set-top box or the PC and
the TV.
(
Refer to the digital set-top box or the PC
manual for operating instructions.)
4
Select HDMI1 input source using the INPUT
button on the remote control.
1 2
or
5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A EURO SCART CABLE
Scart
Input Output
Video Audio RGB Video, Audio
AV1
O O O
Analogue TV, Digital TV
Output Type
Current
input mode
l
AV1
(TV Out)
AV1
(When DTV scheduled recording is in
progress using recording equipment.)
Digital TV Digital TV
O
Analogue TV, AV Analogue TV
O
(The input mode is converted
to DTV.)
Component/RGB Analogue TV
HDMI Analogue TV
NOTE
Any Euro scart cable used must be signal shielded.
TV Out : Outputs Analogue TV
or Digital TV signals.
1
Connect the Euro scart socket of the external
equipment (DVD, VCR, etc.) to the AV1 Euro
scart socket on the TV.
2
Turn on the external equipment.
(Refer to the external equipment's manual for
operating instructions.)
3
Select AV1 input source using the INPUT but-
ton on the remote control.
1
6
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
USB SETUP
1
Connect the USB device to the USB IN jack
on the TV.
2
After connecting the USB IN jack, you use the
USB function. (
p.52)
CONNECTING WITH A RF CABLE
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
1
Connect the ANT OUT socket of the VCR to
the ANTENNA IN socket on the TV.
2
Connect the antenna cable to the ANT IN
socket of the VCR.
3
Press the PLAY button on the VCR and match
the appropriate channel between the TV and
VCR for viewing.
Wall Jack
Antenna
1
2
1
or
7
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A RCA CABLE
NOTE
If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the
TV.
1
Connect the AUDIO/VIDEO jacks between TV
and VCR or external equipment. Match the
jack colours (Video = yellow, Audio Left =
white, and Audio Right = red)
2
Insert a video tape into the VCR and press
PLAY on the VCR.
(
Refer to the VCR owner’s
manual.
)
Or, Operate the corresponding external equip-
ment.
(Refer to external equipment operating guide.)
3
Select AV2 input source using the INPUT but-
ton on the remote control.
If connected to AV IN 3, select AV3 input
source.
1
Camcorder
Video Game Set
or
1
Camcorder
Video Game Set
or
or
8
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's set-
tings.
1
Connect the RGB output of the PC to the RGB
IN (PC) jack on the TV.
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the PC and the TV
4
Select RGB input source using the INPUT but-
ton on the remote control.
2
1
9
EXTERNAL EQUIPMENT SETUP
HEADPHONE SETUP
You can listen the sound through the headphone.
NOTE
AUDIO menu items are disabled when connecting a headphone.
When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
Optical Digital Audio Out is not available when connecting a headphone.
Headphone impedance: 16
Max audio output of headphone: 10 mW to 15 mW
1
Plug the headphone into the headphone socket.
2
To adjust the headphone volume, press the
+ or - button. If you press the MUTE button,
the sound from the headphone is switched off.
INSERTION OF CI MODULE
To view the encrypted (pay) services in digital TV mode.
This feature is not available in all countries.
NOTE
Check if the CI module is inserted into the PCMCIA card slot
in the right direction. If the module is not inserted properly,
this can cause damage to the TV and the PCMCIA card slot.
1
Insert the CI Module to PCMCIA (Personal
Computer Memory Card International
Association) CARD SLOT of TV as shown.
For further information, see p.34.
AV IN 2
L/MONO
R
AUDIO
VIDEO
HDMI IN 2 USB IN
H/P
ANTENNA IN
HDMI / DVI IN
1
(RGB)
Check this point as
shown and insert the CI
Module.
10
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL
DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
CAUTION
Do not look into the optical output port. Looking at the laser
beam may damage your vision.
1
Connect one end of an optical cable to the TV
Digital Audio
(
Optical
)
Output port.
2
Connect the other end of the optical cable to
the digital audio
(
Optical
)
input on the audio
equipment.
3
Set the “TV Speaker option - Off ” in the
AUDIO menu.(
p.112). Refer to the external
audio equipment instruction manual for opera-
tion.
1
2
11
EXTERNAL EQUIPMENT SETUP
1
Connect the Wireless Media Box to the
WIRELESS CONTROL jack and HDMI/DVI IN
1, HDMI IN 2 (Except for 19/22LD3
***
), HDMI
IN 3 (Except for 19/22/26/32LD3
***
,
32/37/42/47LD4
***
, 19/22LE3
***
, 22LE5
***
) or
HDMI IN 4 (Only 32LE3
***
, 32/37/42LE4
***
,
32/37/42/47/55LE5
***
) jack on the TV.
EXTERNAL EQUIPMENT WIRELESS CONNECTION
(Only 32/42/46/52/60LD5
***
, 32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
)
You can connect between TV and external equipment wirelessly.
For further information, refer to the “LG Wireless Media Box manual for operating instructions.
LG Wireless Media Box
12
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
RGB-PC, HDMI/DVI-PC mode
HDMI/DVI-DTV mode
SUPPORTED DISPLAY RESOLUTION
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400 31.468 70.08
640x480 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.78 59.87
1360x768 47.72 59.80
1280x1024 63.981 60.02
1920x1080
(RGB-PC)
66.587 59.93
1920x1080
(HDMI-PC)
66.587 59.93
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x480
31.469
31.5
59.94
60
720x576 31.25 50
1280x720
37.5
44.96/45
50
59.94/60
1920x1080
33.72/33.75
28.125
26.97/27
33.716/33.75
56.25
67.43/67.5
59.94/60
50
23.97/24
29.976/30.00
50
59.94/60
NOTE
Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.
There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
We recommend using 1920x1080, 60 Hz(Except
for 19/22/26LD3
***
, 32LD34**, 19/22/26LE3
***
),
1360x768, 60 Hz(Only 19/22/26LD3
***
, 32LD34**,
19/22/26LE3
***
) for the PC mode, this should pro-
vide the best picture quality.
Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included with
the TV).
If using a sound card, adjust PC sound as required.
If the graphic card on the PC does not output ana-
logue and digital RGB simultaneously, connect only
one of either RGB or HDMI IN (or HDMI/DVI IN) to
display the PC output on the TV.
If the graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)
DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
(Except for 19/22/26LD3
***
, 32LD34
**
, 19/22/26LE3
***
)
13
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Screen Reset
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Screen.
3
Select Reset.
4
Select Yes.
5
Run Reset.
To Set
Auto Config.
SCREEN
Move
Prev.
Resolution
Position
Size
Phase
Reset
Yes No
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
14
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
If the position of the image is still not correct,
try Auto adjustment again.
If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
1
Select PICTURE.
2
Select Screen.
3
Select Auto Config..
4
Select Yes.
5
Run Auto Config..
Auto Config.
Auto Config.
SCREEN
Move
Prev.
Resolution
Position
Size
Phase
Reset
Yes No
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
15
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
Selecting Resolution
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Screen.
3
Select Resolution.
4
Select the desired resolution.
5
Auto Config.
SCREEN
Move
Prev.
Resolution
Position
Size
Phase
Reset
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
1024 x 768
1280 x 768
1360 x 768
16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust
the picture position manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Screen.
3
Select Position, Size or Phase.
4
Make appropriate adjustments.
5
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
Auto Config.
SCREEN
Resolution
Position
Size
Phase
Reset
Move
Prev.
17
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
INITIALIZING SETUP
When your TV is turned on, you will be able to use its features.
VOLUME ADJUSTMENT
PROGRAMME SELECTION
1
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can
adjust the Language, Mode Setting, Power Indicator(When you select Home Use from
Mode Setting - Only LED LCD TV MODELS), Country or TimeZone (When Russia is select-
ed for Country) or Set Password(When France is selected for Country), Auto Tuning.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed
again.
b. Press the BACK button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might
not work, depending on the DTV broadcasting environment.
d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality
data, “Store Demo” mode initializes the product to the image quality set by us after a certain period
of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the
OPTION menu.
g
. When France is selected for Country, password is not
'0', '0', '0', '0'
but ‘1’, ‘2’, ‘3’, ‘4’.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the / I, INPUT or P
(
or P
)
button on the TV
or press the POWER, INPUT, P
or NUMBER button on the remote control and the TV
will switch on.
1
Press the P or NUMBER buttons to select a programme number.
1
Press the + or - button to adjust the volume.
2
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ , - or AV Mode button.
18
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Aspect Ratio: Selects your desired picture for-
mat.
For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After complet-
ing Zoom Setting, the display goes back to
Q.Menu.
Clear Voice II : By differentiating the human
sound range from others, it helps users lis-
ten to human voices better.
Picture Mode : Selects your desired Picture
Mode.
Sound Mode : It is a feature to automatical-
ly set the sound combination which it deems
the best for the images being watched.
Selects your desired Sound Mode.
Audio or Audio Language : Selects the sound
output
.
Sleep Timer : Sets the sleep timer.
Skip Off/On : Selects the Skip Off/On.
USB Device : SelectsEject in order to eject
USB device.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
Press the Q.MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Display each menu.
2
Select your desired Source.
3
Aspect Ratio
16:9
Exit
19
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
• Press the RED button, you can check the
Customer Support menu.
• Press the GREEN button, you can check
the Simple Manual menu.
Press the MENU/EXIT button to return to
normal TV viewing.
Press the BACK button to move to the pre-
vious menu screen.
NOTE
It is not possible to use CI Information in Analogue mode.
IR Blaster : For further information, refer to the optional “Wireless Media Box manual for operat-
ing instructions.
It is possible to use Movie List menu in 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***,
32/37/42/47/55LE5***.
1
Display each menu.
2
Select a menu item.
3
Move to the pop up menu.
OK
Move
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
TIME
OK
Move
Set Password
Lock System : Off
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
IR Blaster
OK
Move
OPTION
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Movie List Music ListPhoto List
MY MEDIA
Exit
Option
Press OK( ) to see photos from the USB.
SETUP PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
(Except for 19/22/26/32LD3
***
,
32/37/42/47LD4
***
, 19/22/26LE3
***
, 22/26LE5
***
)
Antenna USB
HDMI2 HDMI3 HDMI4HDMI1
AV1 AV2 Component
RGB
OK
Move
Input List
Input Label
Exit
AV3
20
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 1,000. But the number may differ slightly
depending on broadcasting signals.
DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable.
If you want to select the Antenna,
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Use NUMBER buttons to input a 4-digit
password in Lock System On’.
If you wish to keep on auto tuning select
Start using the
button. Then, press
the OK button. Otherwise select Close.
Automatic Numbering: Decide whether
to use the programme numbers as sent
by broadcasting stations for tuning.
When select Italy in the County menu, If
the pop up is displayed when the conflict-
ed programme after Auto Tuning, select a
broadcaster for Conflicting programme
number to solve.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Auto Tuning
OK
Move
● ● Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Auto Tuning
Please select your TV Connection.
CableAntenna
Close
If you select antenna or cable,
existing channel information is
deleted.
1
Select SETUP.
2
Select Auto Tuning.
3
Select Antenna.
4
Select Start.
5
Run Auto tuning.
Antenna Cable
Antenna Cable
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
SECAM L Search
Automatic Numbering
Start
Close
Antenna
Antenna
In the following country, DVB cable can be used : Germany, Netherlands, Sweden, Switzerland,
Denmark, Austria, Finland, Norway, Slovenia, Hungary.(The supported country can be added.)
21
WATCHING TV / PROGRAMME CONTROL
If you want to select the Cable,
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Auto Tuning.
3
Select Cable.
4
Select Comhem or Other
Operators.
5
Select Quick or Full.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Auto Tuning
OK
Move
● ● Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Auto Tuning
OK
Move
● ● Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Auto Tuning
Please select your TV Connection.
CableAntenna
Close
If you select antenna or cable,
existing channel information is
deleted.
Antenna Cable
Antenna Cable
Use NUMBER buttons to input a 4-digit
password in Lock System On’.
When you select the Cable, the Cable
Service Operator selection screen can
differ or not exist by the Cable situation of
the applicable country.
• The popup window to select
Service
Operator
is only shown initially for the 3
cases when you accessing the Initial
Setting menu, when you change from
Antenna to Cable or when you access
the menu after changing the Country.
When you want to select
Service Operator
aside from the above 3 cases, you can do
so by selecting Setup->Cable DTV
Setting-> Service Operator.
Acquired certification SO : Sweden(Comhem, Canal Digital), Denmark(YouSee, Canal Digital,
Stofa), Norway(Canal Digital).
If there are not any Service Operator that you want, select Other Operators.
If you select “Other Operators”, or the selected country supports “Other Operators” only, it may
take some time to search all the channels, or it may not search some of the channels.
If some of the channels do not appear, follow the steps below:
1. SETUP -> Auto Tuning -> Cable -> Setting
2. Switch Home Tuning from "Off" to "On"
3. Input additional values such as the frequency, symbol rate, modulation, and network ID.
(You can ask your cable service provider for the above information.)
Previous Next
Comhem
Other Operators
Service Operator
22
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
When you select the Quick,
Start Frequency(kHz) : 114000
Quick
End Frequency(kHz) : 862000
Network : Auto
OK
Close
Setting
Start Frequency(kHz) : 114000
Quick
End Frequency(kHz) : 862000
Network : Auto
OK
Close
Setting
If you wish to keep on auto tuning, select
Start using the
button. Then, press
the OK button. Otherwise select Close.
Automatic Numbering: Decide whether
to use the programme numbers as sent
by broadcasting stations for tuning.
Skip Scramble Programme : Scramble
Programme is skipped in Auto Tuning
and Manual Tuning.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Home Tuning
On
Frequency(kHz)
Network ID
Start Frequency(kHz)
End Frequency(kHz)
Symbol rate(kS/s)
Modulation
362000
Auto
114000
862000
6900
0
640QAM
Reset
Close
6
Select Quick.
7
Select Setting.
8
Make appropriate
adjustments.
9
Select Close.
10
Select OK.
11
Select Start.
12
Run Auto tuning.
Check your antenna connection. The
previous channel information will be
updated during Auto Tuning.
Skip Scramble Programme
Automatic Numbering
Start
Close
Cable
Cable
23
WATCHING TV / PROGRAMME CONTROL
When you select the Full,
Search every available signal.
Full
OK
Close
If you wish to keep on auto tuning, select
Start using the
button. Then, press
the OK button. Otherwise select Close.
Automatic Numbering: Decide whether
to use the programme numbers as sent
by broadcasting stations for tuning.
Skip Scramble Programme : Scramble
Programme is skipped in Auto Tuning
and Manual Tuning.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
6
Select Full.
7
Select OK.
8
Select Start.
9
Run Auto tuning.
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
Skip Scramble Programme
Automatic Numbering
Start
Close
Cable
Cable
24
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
The following values are needed in order to search all available programmes quickly and correctly.
The commonly used values are provided as "default".
However, for correct settings, please inquire of the cable service provider.
When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to
find available channels.
In the case when the programme is not searched by selecting the Default, perform the searching by
selecting the Full.
However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be
taken too much.
Frequency : Enter a user-defined frequency.
Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as
modem sends symbols to a channel).
Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
Network ID : Unique identifier allocated for each user.
Start Frequency
: Enter a user-defined start frequency range.
End Frequency
: Enter a user-defined end frequency range.
25
WATCHING TV / PROGRAMME CONTROL
CABLE DTV SETTING
(IN CABLE MODE ONLY)
The range that a user can select from the Service Operator menu differs depending on number of
Service Operator supported by each country, and if number of supported Service Operator for each
country is 1, corresponding function becomes non-activation.
After changing Service Operator, a warning window saying that channel map will be deleted when OK
button is pressed or Close is selected, and a Auto-tuning pop-up window appears when YES is
selected.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Cable DTV Setting
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Cable DTV Setting
1
Select SETUP.
2
Select Cable DTV Setting.
3
Select Service Operator or Channel
Auto Update.
4
Select your desired Source.
Comhem
Channel Auto Update
Service Operator
Off
Close
If you select Cable, you can see Cable
DTV Setting menu.
When Channel Auto Update is On, you
can update information for all the pro-
grammes
that can be updated, including
the programme
currently being watched.
When Channel Auto Update is Off, you
can only update information for the pro-
gramme currently being watched.
26
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually add a programme to your programme list.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
(IN DIGITAL MODE)
1
Select SETUP.
2
Select Manual Tuning.
3
Select DTV.
4
Select the desired channel number.
5
Select update or add if signal present.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Frequency(kHz) 474000
DTV
UHF CH.
30
Close
Add
Signal Strength
50%
Signal Quality
50%
If you want to select the Antenna,
Use NUMBER
buttons to input a 4-digit
password in Lock System On’.
You can select SBAND when the country is set
to "Norway, Latvia."
27
WATCHING TV / PROGRAMME CONTROL
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Manual Tuning
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Manual Tuning.
3
Select Cable DTV.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Manual Tuning
If you want to select the Cable,
Cable DTV
Frequency(kHz)
362000
Symbol rate(kS/s)
6875
Modulation
64QAM
Close
Add
Signal Strength
50%
Signal Quality
50%
Use NUMBER
buttons to input a 4-digit
password in Lock System On’.
Symbol rate : Enter a user-defined
symbol rate (Symbol rate: Speed at
which a device such as modem sends
symbols to a channel).
Modulation : Enter a user-defined
modulation. (Modulation: Loading of
audio or video signals onto carrier).
Make appropriate adjustments.
4
28
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
(IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Use NUMBER
buttons to input a 4-digit password in Lock System On’.
L : SECAM L/L (France)
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa)
I : PAL I (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
To store another channel, repeat steps 4 to 9.
1
Select SETUP.
2
Select Manual Tuning.
3
Select TV or Cable TV.
4
or
Select the desired
programme
number on.
5
Select a TV system.
6
Select V/UHF or Cable.
or
7
Select the desired
channel number.
8
Commence searching.
9
Select Store.
Storage
Cable
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Storage
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
or
29
WATCHING TV / PROGRAMME CONTROL
You can assign a station name with five characters to each programme number.
Assigning a station name
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Manual Tuning.
3
Select TV or Cable TV.
4
Select Name.
5
Select the position and make
your choice of the second
character, and so on.
You can use an the alphabet
A to Z, the number 0 to 9, +/
-, and blank.
6
Select Close.
7
Select Store.
Normally fine tuning is only necessary if reception is poor.
Fine Tuning
Select Fine.
Select SETUP.
Select Manual Tuning.
Select Store.
6
Fine tune for the best picture
and sound.
1
2
Select TV or Cable TV.
3
4
5
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Storage
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Storage
Cable
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
or
30
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P button
during TV viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked
when you start Auto Tuning.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Programme Edit.
3
Enter the Programme Edit.
4
Select a programme to be stored or
skipped.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Manual Tuning
Manual Tuning
Manual Tuning
Programme Edit
Previous
Page Change
P
Block/Unblock Skip
Pr. Change
DTV
RADIO
TV
800 YLE TV1
803 YLE24
806 Kanal Lokal
809 TV4 Plus
812 TV4 Fakta
815 Demo
818 24H TVE
801 YLE TV2
804 YLE Teema
807 CNN
802 YLE FST
805 TV4 Stockholm
808 TV4
810 TV400
813
MediaCorp HD5
811 TV4 Film
814 SNY_SSU
816 TVE 1 817 TVE 2
819 CLAN/50 TVE 820 LA7
Page 1/2
Programme Edit
Favourite Group :
A
Favourite Pr. Group
Q.MENU
Favourite Pr.
FAV
Previous
Page Change
P
Block/Unblock Skip
Pr. Change
Cable DTV
Cable Radio
Cable TV
800 YLE TV1
803 YLE24
806 Kanal Lokal
809 TV4 Plus
812 TV4 Fakta
815 Demo
818 24H TVE
801 YLE TV2
804 YLE Teema
807 CNN
802 YLE FST
805 TV4 Stockholm
808 TV4
810 TV400
813
MediaCorp HD5
811 TV4 Film
814 SNY_SSU
816 TVE 1 817 TVE 2
819 CLAN/50 TVE 820 LA7
Page 1/2
Programme Edit
Favourite Group :
A
Favourite Pr. Group
Q.MENU
Favourite Pr.
FAV
or
31
WATCHING TV / PROGRAMME CONTROL
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
Skipping a programme number
IN TV MODE
Deleting a programme
Moving a programme
IN DTV/RADIO MODE
When programmes are to be skipped, the
skipped programme shows in blue and
these programmes will not be selected by
the P buttons during TV viewing.
If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit or EPG.
The selected programme is deleted, all the
following programmes are shifted up one
1
Select a programme number to be skipped.
2
BLUE
Turn the programme number to blue.
3
BLUE
Release.
1
Select a programme number to be deleted.
2
RED
Turn the programme number to red.
1
Select a programme number to be moved.
2
GREEN
Turn the programme number to
green.
3
GREEN
Release.
Locking a programme number
1
Select a programme number to be locked.
2
YELLOW
Turn the programme number to yellow.
3
YELLOW
Release.
It can be registered as Lock
programme even when Lock
System is turned Off.
32
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Auto Sort
After activating Auto Sort once, you can no
longer edit programmes.
1
Start Auto Sort.
Skipping a programme number
When a programme number is skipped it
means that you will be unable to select it
using the P button during normal TV
viewing.
If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit or EPG.
1
Select a programme number to be skipped.
2
BLUE
Turn the programme number to blue.
3
BLUE
Release.
Selecting favourite programme
1
Select your desired programme.
2
Add corresponding programme to Favourite
list of current Favourite group.
3
Release.
Favourite programmes is a convenient feature that lets you quickly scan up to programmes of your
choice without having to wait for the TV to scan through all the in-between programmes.
Locking a programme number
1
Select a programme number to be locked.
2
YELLOW
Turn the programme number to yellow.
3
YELLOW
Release.
It can be registered as Lock
programme even when Lock
System is turned Off.
33
WATCHING TV / PROGRAMME CONTROL
Selecting favourite programme group
1
Select your desired programme.
2
Display a pop-up window where
Favourite group can be changed.
3
Select a Favourite group.
34
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (pay services). If you remove the CI
Module, you cannot watch pay services.
When the module is inserted into the CI slot, you can access the module menu.
To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI
module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI
Module, you may not have any sound output.
This may be incompatible with the CI module and smart card.
CI (Common Interface) functions may not be possible depending upon the country broadcasting cir-
cumstances.
When using a CAM(Conditional Access Module), please make sure it meets fully the requirements of
either DVB-CI or CI plus.
Viaccess Module
Select the item
Consultations
Authorizations
Module information
Press the BACK/EXIT button to move to the previous menu screen.
This OSD is only for illustration and the menu
options and screen format will vary according to
the Digital pay services provider.
It is possible for you to change CI (Common
Interface) menu screen and service by consult-
ing your dealer.
1
Select SETUP.
2
Select CI Information.
3
Select the desired item: Module information, smart card
information, language, or software download etc.
4
Save.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
CI Information
i
35
WATCHING TV / PROGRAMME CONTROL
Software Update
Close
● Current Version
00.00.01
◄ On ►
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
Press OK( ) to set programme settings.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
Software Update
Close
1
Select Customer Support.
2
Select Software Update.
3
Select On or Off.
If you select On, a user confirm message box will
be displayed to notify that new software is found.
4
Save.
RED
SETUP PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
Exit
Customer Support
Simple Manual
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
36
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
When setting “Software Update
Occasionally, a transmission of
updated digital software infor-
mation will result in the following
menu on the TV screen.
Simple Update : for current
update stream
Schedule Update : for scheduled
update stream
A window as display below
appears when download
completes.
TV is restarted when "Yes" is
selected.
When the Software Update menu
is "Off", the message to change it
to "On" appears.
Download starts when "Yes" is
selected. At this time, pro-
gressing pop-up window does
not display.
Download progress status can
be checked from Software
Update menu.
- During Progress of a Software Update, please note the following:
Power to the TV must not be interrupted.
The antenna must not be disconnected.
After Software Update, you can confirm the updated software version in Software Update menu.
It may take hours to download the software, so make sure that the power stays on during the download.
The software is downloaded only in Standby mode or in MUX with Software Update Service, and stops
when the power cord is unplugged or when viewing MUX without Software Update Service.
When you return to Standby mode or MUX with Software Update Service, the software download will
resume from where it stopped.
Yes
No
Software update is available.
Would you like to download now?
?
Yes
No
A new software update is available at
00/00/0 00:00.
Do you want to update the software when
available?
?
Yes
No
New software version is ready. If you want
to install now, TV will be turned off and
restart. Continue?
Software Update
Close
Software downloading progress.
Ver. 00.00.01 ► Ver.00.00.00
◄ On ►
4%
37
WATCHING TV / PROGRAMME CONTROL
PICTURE/SOUND TEST
This function is a customer support function that can execute picture and sound tests.
Press OK( ) to set programme settings.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
Picture Test
Close
1
Select Customer Support.
2
Select Picture Test or Sound Test.
3
Select Yes or No.
RED
Yes No
Do you have a problem in this test
screen?
?
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
38
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and
Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple chan-
nels.))
Engineering Diagnostics
Manufacturer : LG Electronics Inc.
Model/Type : 42LD450-ZA
Serial No. : SKJY1107
Software Version : V00.00.01
Ch 34
Ch 36
Ch 38
Ch 54
Ch 60
Exit
MENU
Popup
Prev.
Ch 30
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
Signal Test
Close
1
Select Customer Support.
2
Select Signal Test.
3
Display Manufacturer, Model/Type, Serial Number and
Software Version.
4
Display the information of Channel.
RED
Press OK( ) to set programme settings.
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
39
WATCHING TV / PROGRAMME CONTROL
PRODUCT/SERVICE INFORMATION
This function is a customer support function that can see product/service information and customer service center
information.
Press OK( ) to set programme settings.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
Product/Service Info.
Close
1
Select Customer Support.
2
Select Product/Service Info..
3
Display MODEL/TYPE, Software version, Serial Number,
Used time, Customer service center and Homepage.
RED
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
40
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
Press the EXIT button to return to normal TV viewing.
Press OK( ) to set programme settings.
1
Select Simple Manual.
2
Select the part of the manual you want to see.
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
GREEN
Image shown may differ from your TV.
RED : Go to the Index page.
BLUE : Play the Simple Manual automatically
or manually.
41
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Displayed when the
Locked Programme.
Mini Glossary
Displaying programme LIST
Selecting a programme in the programme list
You may find some blue programmes.
These have been set up to be skipped by
auto programming or in the programme
edit mode.
Some programmes with the channel num-
ber shown in the programme LIST indicate
there is no station name assigned.
The mode will be switched
between TV, DTV, and Radio
from the program you are cur-
rently watching.
1
Display the Programme List.
1
Select a programme.
2
Switch to the chosen programme number.
BLUE
Turn the programme edit.
Programme List
1 BBC
2 BBC
3 BBC
4 BBC
Pr.Edit
Exit
5 BBC
A
42
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Displaying the favourite programme
list
Paging through a programme list
1
Turn the pages.
2
Return to normal TV viewing.
1
Display the Favourite Programme List.
Favourite List
1 BBC
2 BBC
3 BBC
Group B
◄ ►Favourite Pr. Group
BLUE
Turn the programme edit.
YELLOW
Current channel is registered/
cancelled as preferred channel on
currently selected Group.
Favourite group is changed.
Pr.Edit
Pr.Reg.
Exit
43
WATCHING TV / PROGRAMME CONTROL
Antenna or Cable : Select it when watch-
ing the DTV/RADIO/TV.
USB : Select it when using USB depends
on connector.
AV : Select it when watching the VCR or
external equipment.
Component : Select it when using the
DVD or the Digital set-top box depends on
connector.
RGB :Select it when using PC depends on
connector.
HDMI : Select it when using DVD, PC or
Digital set-top box depend on connector.
INPUT LIST
HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an external
device approves voltage.
By using TV/RAD button, you can move from External Input to RF Input and to the last watched pro-
gramme in DTV/RADIO/TV mode.
1
Select the input source.
Antenna USB
HDMI2 HDMI3 HDMI4HDMI1
AV1 AV2 Component
RGB
OK
Move
Input List
Input Label
Exit
AV3
Image shown may differ from your TV.
44
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select Input Label.
2
Select the source.
3
Select the label.
BLUE
Input Label
AV1
AV2
AV3
Component
RGB
Close
Antenna USB
HDMI2 HDMI3 HDMI4HDMI1
AV1 AV2 Component
RGB
OK
Move
Input List
Input Label
Exit
AV3
Image shown may differ from your TV.
45
WATCHING TV / PROGRAMME CONTROL
OK
Move
Language(Language)
Country : Ireland
Disability Assistance
Power Indicator
Data Service : MHEG
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Data Service : MHEG
DATA SERVICE
(This menu is enabled only in Ireland. )
This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same
time.
If only one of them exists, either MHEG or Teletext is enabled regardless of which option you select-
ed.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select OPTION.
2
Select Data Service.
3
Select MHEG or Teletext.
4
Save.
OK
Move
Language(Language)
Country : Ireland
Disability Assistance
Power Indicator
Data Service : MHEG
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Data Service : MHEG
MHEG
Teletext
MHEG
46
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable with-
out additional cables and settings.
If you do not want SIMPLINK menu,select Off”.
In wireless external output, SIMPLINK function is not supported.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Display the SIMPLINK.
2
Select On or Off.
3
Save.
On
Watch TV
DISC
VCR
VCR
Speaker
TV Speaker
HDD Recorder
OK
Exit
47
WATCHING TV / PROGRAMME CONTROL
Connecting to Home Theater with the SIMPLINK logo.
NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK
device with the HDMI cable.
When you switch the Input source using the INPUT button on the remote control, you can stop the opera-
tion of a device controlled by SIMPLINK.
When you select or operate a media device with
home theater function, the speaker automatically
switches to home theater speaker (HT speaker).
1
Connect the
HDMI/DVI IN 1, HDMI IN 2
(Except for 19/22LD3
***
), HDMI IN 3 (Except
for 19/22/26/32LD3
***
, 32/37/42/47LD4
***
,
19/22LE3
***
, 22LE5
***
) or HDMI IN 4 (Only
32LE3
***
, 32/42/47LE4
***
,
32/37/42/47/55LE5
***
)
terminal on the back of
the TV and the HDMI output terminal of the
Home Theater using HDMI cables.
2
Connect the Digital Audio output terminal on
the back of the TV and the Digital Audio input
terminal of the Home Theater using optical
cables.
3
Select Home Theater in the Speaker menu by
pushing the SIMPLINK button.
1 2
Home Theater
48
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Disc playback
Control connected AV devices by pressing the
, OK, ►,
, l l, ◄◄ and ►►
buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional set-
tings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically
to turn on mode.
* A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK,
does not provide this function.
Note: To operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used.
(*CEC: Consumer Electronics Control).
SIMPLINK Functions
49
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Menu
Press the
button and then OK button to select the desired SIMPLINK source.
TV viewing : Switch to the previous TV pro-
gramme regardless of the current mode.
DISC playback : Select and play connected
discs.
When multiple discs are available, the device
type of discs are conveniently displayed at
the bottom of the screen.
VCR playback : Play and control the con-
nected VCR.
HDD Recordings playback : Play and con-
trol recordings stored in HDD.
Audio Out to Home theater/Audio Out to
TV: Select Home theater or TV speaker for
Audio Out.
1
2
3
4
5
Home theater: Only one supported at a time
DVD, Recorder: Up to one(Only 19/22LD3
***
), two(Only 26/32LD3
***
, 32/37/42/47LD4
***
,
19/22LE3
***
, 22LE5
***
), three(Only 32/42/46/52/60LD5
***
, 26LE3
***
, 26LE5
***
), four(Only 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
) supported at a time.
VCR: Only one supported at a time
On
Watch TV
DISC
VCR
VCR
Speaker
TV Speaker
HDD Recorder
OK
Exit
Selected Device
When a device is con-
nected (displayed in
bright colour)
When device is not con-
nected (displayed in
gray)
1
2
3
4
5
50
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Off Cinema
Game Sport
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Disables the AV MODE.
Cinema Optimizes video and audio for watching movies.
Sport Optimizes video and audio for watching sports events.
Game Optimizes video and audio for playing games.
If you select Cinema in AV mode, Cinema will be selected both for
Picture Mode and Sound Mode in PICTURE menu and AUDIO menu
respectively.
If you select Offin AV mode, the picture and image which you initially
set will be selected.
1
A
V MODE
Press the AV MODE button repeatedly to select the desired source.
2
51
WATCHING TV / PROGRAMME CONTROL
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Factory Reset
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
But the settings of Day and Night of the Picture Mode cannot be initialized.
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
When the Lock System menu is "On", the message to enter the password appears.
Yes
No
All user settings and channel settings will
be reset. Still Continue?
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
In Lock System "On", if you forget your
password, press '0', '3', '2', '5' on the
remote control hands et.
1
Select OPTION.
2
Select Factory Reset.
3
Select Yes.
4
Start Factory Reset.
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Factory Reset
52
TO USE A USB DEVICE
TO USE A USB DEVICE
WHEN CONNECTING A USB DEVICE
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activat-
ed.
When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA
menu.
In USB device, you can not add a new folder or delete the existing folder.
When removing the USB device
Connect the USB device to the USB IN
jack on the TV.
3
Select Movie List (Only
32/40/46/55LE4***, 19/22/26/32LE3
***
,
32/37/42LE4
***
, 22/26LE5
***
,
32/37/42/47/55LE5
***
), Photo List or
Music List.
1
Select the USB Device menu before removing
the USB device.
2
Only photo(JPEG), music (MP3) and movie
(DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,T
S,TRP,TP,ASF,WMV,FLV) are supported.
Movie List Music ListPhoto List
MY MEDIA
Exit
Option
Press OK( ) to see photos from the USB.
1
Select USB Device.
2
Select Eject.
or
53
TO USE A USB DEVICE
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
A USB storage device using an automatic recognition programme may not be recognized.
A USB storage device which uses its own driver may not be recognized.
The recognition speed of a USB storage device may depend on each device.
Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be
damaged.
Please do not connect the USB storage device which was artificially maneuvered on the PC. The
device may cause the product to malfunction or fail to be played. Never forget to use only a USB stor-
age device which has normal music files, image files or movie files.
Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system
provided with the Windows operating system. In case of a storage device formatted as a different utility
programme which is not supported by Windows, it may not be recognized.
Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If
not, the device may not be recognized.
Please connect a USB storage device with the cable offered by the device maker.
Some USB storage devices may not be supported or operated smoothly.
File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100
English characters.
Be sure to back up important files since data stored in a USB memory device may be damaged. We
will not be responsible for any data loss.
If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to
connect the external power source. - Please use a power adaptor for an external power source. We do not guar-
antee an USB cable for an external power source.
If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use
up to 4 partitions or USB memory devices.
If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
If the USB memory device does not work properly, disconnect and reconnect it.
How fast a USB memory device is detected differs from device to device.
If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is
turned on.
The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB
memory.
Any device with more than the recommended capacity may not work properly.
If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on
again to make it work properly.
USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
Maximum of 999 folders or files can be recognized under one folder.
Select USB Device.
Select Eject.
54
TO USE A USB DEVICE
TO USE A USB DEVICE
MOVIE LIST
(Only 19/22/26/32LE3
***
, 32/37/42LE4
***
, 22/26LE5
***
, 32/37/42/47/55LE5
***
)
You can play movie files on a USB storage device.
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
It is a movie list that displays folder information and movie file.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.dvix/*.avi/*.asf/*.wmv/*.flv/*.avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file
Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.263
Audio format : Dolby Digital, Mpeg, MP3, LPCM, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files)
• Some user-created subtitles may not work properly.
Some special characters are not supported in subtitles.
HTML tags are not supported in subtitles.
Subtitles in languages other than the supported languages are not available.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is
changed.
• A damaged movie file may not be played correctly, or some player functions may not be usable.
• Movie files produced with some encoders may not be played correctly
.
If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
HD videos with a maximum of 1920x1080@25/30P or 1280x720@50/60P are supported, depending on the frame.
• Videos with resolutions higher than 1920X1080@25/30P or 1280x720@50/60P may not work properly depending on
the
frame.
• Movie files other than the specified types and formats may not work properly.
Max
bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
• We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
DTS Audio codec is not supported.
A movie file more than 30 GB in file size is not supported for playback.
A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
Playing a video via a USB connection that doesn’t support high speed may not work properly
.
Files encoded with GMC(Global Motion Compensation) may not be played.
When you are watching the movie by Movie List function, you can adjust an image by Energy Saving and AV Mode
key
on the remote control. User setup for each image mode does not operate.
55
TO USE A USB DEVICE
File
Extension name
Video Decoder Audio Codec Max Resolution
mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM
1920x1080@30p
(only , Motion JPEG
640x480@30p)
dat MPEG1 MP2
ts,trp,tp MPEG2, H.264, AVS, VC1
MP2,MP3,Dolby Digital
vob MPEG1, 2 MP2,MP3,Dolby Digital,LPCM
mp4, mov
MPEG4,DivX 3.11, DivX 4.12, DivX 5.x,
DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02,
Xvid 1.03, Xvid 1.10-beta1/2H.264
MP3
mkv H.264, MPEG-1,2,4
MP2,MP3,Dolby
Digital,LPCM
divx, avi
MPEG2, MPEG4,DivX 3.11, DivX 4.
DivX 5, DivX 6, Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
MP2,MP3,Dolby Digital,LPCM,
ADPCM
Motion JPEG
(avi, mp4, mkv)
JPEG LPCM, ADPCM
asf, wmv VC1 WMA
flv Sorenson H.263, H264 MP3
56
TO USE A USB DEVICE
TO USE A USB DEVICE
Screen Components
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on
1
Current page/ total pages of
contents under the folder
focused on
1
1
3
4
5
2
Select MY MEDIA.
Select Movie List.
2
1
You can also adjust USB in the INPUT menu.
Page 1/1
Movie List
Drive1
Page 1/1
Mark
MARK
Play Page Change
Move
P
003
001 002
004
005 006
2
1
3
4
5
To Photo List
Change Numbers
Mark Mode
Exit
• Some files may be displayed
the preview image by icon
only.
• Non-supported files are
displayed the preview
image by icon only.
Abnormal files are
displayed in the
form of bitmap.
57
TO USE A USB DEVICE
Movie Selection
When playing movie files
Use the P
button to navigation in the
movie page.
1
Select the target folder or drive.
2
Select the desired movie title.
3
Movie files are played.
GREEN
Repeatedly, press the GREEN button to converted to Photo List->Music List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
EXIT
Return to normal TV viewing.
Press the PLAY
(
)
button to return to normal playback.
Using the remote control
Page 1/1
Movie List
Drive1
Page 1/1
Mark
MARK
Play Page Change
Move
P
003
001 002
004
005 006
051. Apple_ ......
02:30:25
To Photo List
Change Numbers
Mark Mode
Exit
58
TO USE A USB DEVICE
TO USE A USB DEVICE
NOTE
In the case of files not supported, a message regarding non-supported file is displayed.
When selected movie files are played
1
Select the target folder or drive.
2
Select the desired movie title.
3
or
BLUE
Convert to Mark Mode.
4
Mark desired Movie file.
5
Marked movie file is played.
When one or more movie files are
marked, the marked movies will
be played in sequence.
Page 1/1
Movie List
Drive1
Page 1/1
003
001 002
004
005 006
Mark
MARK
Mark Page Change
Move
P
Exit Mark Mode
Unmark All
Mark All
Play Marked
Exit
051. Apple_ ......
02:30:25
RED
Mark Mode
59
TO USE A USB DEVICE
RED
Play the selected movie file.
Once a movie file finishes playing, the next selected one will be played automatically.
GREEN
Mark all movie files on the screen.
YELLOW
Deselect all marked movie files.
BLUE
Exit the Mark Mode.
EXIT
Return to normal TV viewing.
Using the remote control
NOTE
If you select “Yes” from OSD when playing the same file after the movie file has been stopped, it will restart
where it stopped previously.
If continuous series files exist within the folder, the next file will automatically be played.
But, this excludes cases when the Repeat function of Movie List Option is turned On(Refer to p. 62) or
when set as Marked Play.
60
TO USE A USB DEVICE
TO USE A USB DEVICE
Option
Hide
Q.MENU
01:02:30 / 02:30:25
◄►
II ◄◄ ►►
Choose options.
Set Video Play.
Set Video.
Set Audio.
Close
Using the Movie List function, play
NOTE
Option values changed in Movie List does not affect Photo List and Music List.
Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
When replaying the video file after stopping, you can play from where it stopped previously.
Exit
Show the Option menu.
Select Set Video Play., Set Video. or Set
Audio..
1
or
2
61
TO USE A USB DEVICE
Stop the playing movie file.
Press the PLAY
(
)
button to return to normal playback.
II
During playback, press the Pause
(
II
)
button.
Still screen is displayed.
If no buttons are pressed on the remote control for 10 minutes after pausing, the
TV returns to the playback state.
Press the Pause
(
II
)
button and then use the FF(►►) button for slow motion.
◄◄
/ ►►
When playing,
repeatedly, press the REW
(
◄◄
)
button to speed up ◄◄(x2)
-> ◄◄◄(x4) ->
◄◄◄◄(x8) ->◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32) .
repeatedly, press the FF
(
►►
)
button to speed up ►►(x2)-> ►►►(x4) ->
►►►►(x8) ->►►►►►(x16) -> ►►►►►►(x32).
Pressing these buttons repeatedly increases the fast forward/reverse speed.
or
Show the Option menu.
Hide the menu on the full-sized screen.
To see the menu again on the full-sized screen, press OK button to display.
Return to normal TV viewing.
< >
When using the
<
or
>
button during playback a cursor indicating the position can
be viewed on the screen.
ENERGY
SAVING
Press the ENERGY SAVING button repeatedly to change the brightness of your
screen.(Refer to p. 95)
A
V MODE
Press the AV MODE button repeatedly to select the desired source.(Refer to p. 50)
Using the remote control
62
TO USE A USB DEVICE
TO USE A USB DEVICE
Picture Size : Selects your desired picture
format during movie play.
Audio Language : Changes the Language
Group of the audio during movie play.
Files
with a single audio track cannot be selected.
Subtitle Langugae
: Turn on/off the subtitle.
Subtitle : Turn on/off the external subtitle.
Language : Activated for SMI subtitle and
can select the language within the subtitle.
Code page : Can select the font for subti-
tle. When set to default, same font as gen-
eral menu will be used.
Sync : Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs by
steps of 0.5 secs during movie play.
Position : Changes the position of the
subtitle either up or down during movie
play.
Size : Selects your desired Subtitle size
during movie play.
Repeat : Turn on/off repeat function of
movie playback. When turned on, the file
within the folder will be played back
repeatedly. Even when the repeated play-
back is turned off, it can run the playback if
the file name is similar to the previous file.
When you select the Set Video Play,
Set Video Play.
Full
Picture Size
Audio Language
1
On
Subtitle Language
Previous
0
● Position
Normal
● Size
0
● Sync
English
● Language
Default
● Code page
On
Repeat
NOTE
Only 10,000 of sync blocks can be supported within the subtitle file.
When playing a video, you can adjust the Picture Size by pressing the RATIO button.
Subtitle Language Support Language
Latin1
English, Spanish, French, German, Italian, Swedish,
Finnish, Dutch, Portuguese, Danish, Romanian,
Norwegian, Albanian, Gaelic, Welsh, Irish,
Catalan,Valencian
Latin2
Bosnian, Polish, Croatian, Czech,
Slovak, Slovenian, Serbian, Hungarian
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian, Ukrainian, Kazakh
Greek
Greek
Turkish
Turkish
Select Picture Size, Audio Language,
Subtitle Langugae or Repeat.
2
Make appropriate adjustments.
1
63
TO USE A USB DEVICE
When you select the Set Video,
Set Video.
Picture Mode
● Dynamic Contrast
Previous
● Backlight 70
● Brightness 50
● Colour 60
● Contrast 100
Standard
Medium
● Edge Enhancer
High
● Noise Reduction
Medium
TruMotion
Low
Picture Reset
(Only 32/42/46/52/60LD5
***
,
32/37/42/47/55LE5
***
)
Select Picture Mode or TruMotion.
2
Make appropriate adjustments. (Refer to p. 96 to 103)
1
64
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Audio,
Set Audio.
Standard
Sound Mode
Off
Auto Volume
Off
Clear Voice II
Balance 0
Previous
L R
Select Sound Mode, Auto Volume, Clear Voice II or
Balance.
2
Make appropriate adjustments. (Refer to p. 107 to 111)
1
65
TO USE A USB DEVICE
Screen Components
You can view photo files on USB storage device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO LIST
PHOTO(*.JPEG) supporting file
Baseline : 64 x 64
to
15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
• You can play JPEG files only.
Non-supported files are displayed in the form of predefined icon.
You can also adjust USB in the INPUT menu.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on
1
Current page/ total pages of
contents under the folder
focused on
1
1
3
2
Select MY MEDIA.
Select Photo List.
2
1
4
5
Page 1/1
Photo List
Drive1
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
Page 1/1
2
1
3
4
5
Mark
MARK
View Page Change
Move
P
To Music List
Change Numbers
Mark Mode
Exit
66
TO USE A USB DEVICE
TO USE A USB DEVICE
GREEN
Repeatedly, press the GREEN button to converted to Music List->Movie List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
Return to normal TV viewing.
Using the remote control
Photo Selection
When playing photo files
1
Select the target folder or drive.
2
Select the desired photos.
3
Photo files are displayed.
Use the P
button to navigation in the
photo page.
Page 1/1
Photo List
Drive1
Page 1/1
Mark
MARK
View Page Change
Move
P
To Music List
Change Numbers
Mark Mode
Exit
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
67
TO USE A USB DEVICE
When selected photo files are displayed
1
Select the target folder or drive.
2
Select the desired photos.
3
or
BLUE
Convert to Mark Mode.
4
Mark desired photo file.
5
Marked photo file is displayed.
When one or more photos are marked, you
can view each marked photo or a slide show
of the marked photos. If no photos are
marked, you can view every individual photo
in the folder or a slide show of all photos in
the folder.
Page 1/1
Photo List
Drive1
Page 1/1
Mark
MARK
Mark Page Change
Move
P
Exit Mark Mode
Unmark All
Mark All
View Marked
Exit
Mark Mode
RED
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
68
TO USE A USB DEVICE
TO USE A USB DEVICE
RED
Display the selected photo file.
GREEN
Mark all photo files on the screen.
YELLOW
Deselect all marked photo files.
BLUE
Exit the Mark Mode.
Return to normal TV viewing.
Using the remote control
69
TO USE A USB DEVICE
How to view photo
2/13
Detailed operations are available on full-sized photo view screen.
Use the P button to navigation in the
photo page.
1
Select the target folder or drive.
2
Select the desired photos.
3
The selected photo is displayed in full
size.
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
Press the EXIT button to move to the previous
menu screen.
Press the EXIT button to go back to Photo List.
Press the BACK button to make Help OSD disappear.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Page 1/1
Photo List
Drive1
Page 1/1
Mark
MARK
View Page Change
Move
P
Slideshow
BGM
Hide
Option
Q.MENU
Exit
To Music List
Change Numbers
Mark Mode
Exit
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
70
TO USE A USB DEVICE
TO USE A USB DEVICE
Slideshow : When no picture is selected, all photos in the cur-
rent folder are displayed during slide show. If some photos are
selected, those photos are displayed in a slide show.
Set the time interval of the slide show in Option.
BGM (Background Music) : Listen to music while viewing photos
in full size.
Set the BGM device and album in Options before using
this function.
You can adjust Option by Q.MENU or MENU button on
the remote control.
(Rotate)
: Rotate photos.
Rotates the photo 90°, 180°, 270°, 360° clockwise.
It can not be rotate when the width of a picture is bigger
than supported height.
(
ZOOM IN
): View the photo by zoom in 2, 4 times.
:
Press the ENERGY SAVING button repeatedly to
change the brightness of your screen.(Refer to p. 95)
Option :
Set values for Slide Speed and BGM.
Use button and OK button to set values. Press
OK to save the settings.
You cannot change BGM while BGM is playing.
Hide : Hide the menu on the full-sized screen.
To see the menu again on the full-sized screen, press
OK button to display.
Press the EXIT button to go back to Photo List.
Use
button to select the previous
or next photo.
Use
button to select and control
the menu on the full-sized screen.
4
Select the
Slideshow,
BGM,
(Rotate),
(ZOOM IN), ,
Option, Hide or
Exit.
2/13
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Slideshow
BGM
Hide
Option
Q.MENU
Exit
71
TO USE A USB DEVICE
2/13
Choose options.
Set Photo View.
Set Video.
Set Audio.
Close
Using the Photo List function
NOTE
Option values changed in Movie List does not affect Photo List and Music List.
Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
Slideshow
BGM
Hide
Option
Q.MENU
Exit
Show the Option menu.
Select Set Photo View., Set Video. or Set
Audio..
1
or
2
01_a.jpg
2008/12/10
1920 x 1080
479 KB
72
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Photo View,
Drive1
Previous
Set Photo View.
BGM
Fast
Slide Speed
On
● Repeat
Off
● Random
Select Slide Speed or BGM.
2
Make appropriate adjustments.
1
73
TO USE A USB DEVICE
When you select the Set Video,
Set Video.
Picture Mode
● Dynamic Contrast
Previous
● Backlight 70
● Brightness 50
● Colour 60
● Contrast 100
Standard
Medium
● Edge Enhancer
High
● Noise Reduction
Medium
TruMotion
Low
Picture Reset
(Only 32/42/46/52/60LD5
***
,
32/37/42/47/55LE5
***
)
Select Picture Mode or TruMotion.
2
Make appropriate adjustments. (Refer to p. 96 to103)
1
74
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Audio,
Set Audio.
Standard
Sound Mode
Off
Auto Volume
Off
Clear Voice II
Balance 0
Previous
L R
Select Sound Mode, Auto Volume, Clear Voice II or
Balance.
2
Make appropriate adjustments. (Refer to p. 107 to 111)
1
75
TO USE A USB DEVICE
MUSIC LIST
You can play music files on USB storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate 32
to
320
Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz
Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz
Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz, 12 kHz
Screen Components
Preview: If any album jacket
for the file(Album Art Image)
exists, this jacket is displayed.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on
2
Current page/ total pages of
contents under the folder
focused on
2
1
3
2
Select MY MEDIA.
Select Music List.
2
1
4
5
6
You can also adjust USB in the INPUT menu.
Page 1/1
Music List
Drive1
Page 1/1
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
3
2
1
5
6
Mark
MARK
Play Page Change
Move
P
4
Change Numbers
Mark Mode
Exit
To Movie List
(Only 19/22/26/32LE3
***
, 32/37/42LE4
***
,
22/26LE5
***
, 32/37/42/47/55LE5
***
)
76
TO USE A USB DEVICE
TO USE A USB DEVICE
Music Selection
When playing music files
1
Select the target folder or drive.
2
Select the desired music title.
3
Music files are played.
Use the P button to navigate up/down in
the music page.
Page 1/1
Music List
Drive1
Page 1/1
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Mark
MARK
Play Page Change
Move
P
GREEN
Repeatedly, press the GREEN button to converted to Movie List->Photo List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
Return to normal TV viewing.
Using the remote control
Change Numbers
Mark Mode
Exit
To Movie List
77
TO USE A USB DEVICE
When selected music files are played
1
Select the target folder or drive.
2
Select the desired music title.
3
or
BLUE
Convert to Mark Mode.
4
Mark desired music file.
5
Marked music file is played.
Page 1/1
Music List
Drive1
Page 1/1
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Mark
MARK
Mark Page Change
Move
P
When one or more music files are marked,
the marked music title will be played in
sequence. For example, if you want to listen
to only one music repeatedly, just mark the
music only and play it. If no music is marked,
all the music in the folder will be played in
sequence.
If you want to activate Random playback, you
must set Option->Set audio play.->Random
to On.
Exit Mark Mode
Unmark All
Mark All
Play Marked
Exit
Mark Mode
RED
78
TO USE A USB DEVICE
TO USE A USB DEVICE
RED
Display the selected music file.
GREEN
Mark all music files on the screen.
YELLOW
Deselect all marked music files.
BLUE
Exit the Mark Mode.
Return to normal TV viewing.
Using the remote control
79
TO USE A USB DEVICE
Choose options.
Set Audio Play.
Set Audio.
Close
Page 1/1
Music List
Drive1
Page 1/1
3 file(s) Marked
004. - B04.mp3
00:00
005. - B05.mp3
00:00
006. - B06.mp3
00:00
007. - B07.mp3
00:00
008. - B08.mp3
00:00
Hide
Exit
Option
Q.MENU
Play with Photo
005. - B05.mp3
02:30 / 03:25
◄►
Using the Music List function, play
NOTE
Option values changed in Movie List does not affect Photo List and Music List.
Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
II
◄◄ ►►
Show the Option menu.
Select Set Audio Play. or Set Audio.
1
or
2
80
TO USE A USB DEVICE
TO USE A USB DEVICE
Using the remote control
Stop the playing music file.
Press the PLAY
(
)
button to return to normal playback.
II
When you press the Pause
(
II
)
button while playing the file, the playback will be
paused.
When you press the Pause
(
II
)
button again while the playback is paused, it will
resume the playback.
◄◄
/ ►►
When playing,
When you press the REW
(
◄◄
)
button, the previous music file will be played.
When you press the FF
(
►►
)
button, the next music file will be played.
GREEN
Start playing the selected music files and then move to the Photo List.
ENERGY
SAVING
Press the ENERGY SAVING button repeatedly to change the brightness of your
screen.(Refer to p. 95)
Only Off/Screen Off operates from the Movie List, Photo List, Music List.
or
Show the Option menu.
When you press the Back button while the music is playing, the music player cur-
rently playing will be hidden and only the music list will be displayed.
When you press the Exit button while the Music player is displayed, only the
music will be stopped and the player will not return to normal TV viewing.
When you press the Exit button while the music is stopped or while the music
player is hidden, the player will return to normal TV viewing.
< >
When using the
<
or
>
button during playback a cursor indicating the position can
be played.
81
TO USE A USB DEVICE
When you select the Set Audio Play,
Previous
Set Audio Play.
On
Repeat
Off
Random
Select Repeat or Random.
2
Make appropriate adjustments.
1
82
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Audio,
Set Audio.
Standard
Sound Mode
Off
Auto Volume
Off
Clear Voice II
Balance 0
Previous
L R
Select Sound Mode, Auto Volume, Clear Voice II or
Balance.
2
Make appropriate adjustments. (Refer to p. 107 to 111)
1
83
TO USE A USB DEVICE
NOTE
A damaged or corrupted music does not play but displays 00:00 in playtime.
A music downloaded from a paid service with copyright protection does not start but displays inappropriate
information in playtime.
If you press OK, buttons, screen saver is stopped.
The PLAY(►), Pause(II), , ►►, ◄◄ buttons on the remote control are also available in this mode.
You can use the ►► button to select the next music and the ◄◄ button to select the previous music.
If you don't press any button for a while during the playing, the
play information box (as shown in the below) will float as a
screen saver.
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period of
time.
002. B02.mp3
► 00:31 / 04:04
84
TO USE A USB DEVICE
TO USE A USB DEVICE
DIVX REGISTRATION CODE
(Only 19/22/26/32LE3
***
, 32/37/42LE4
***
, 22/26LE5
***
, 32/37/42/47/55LE5
***
)
Confirm the DivX registration code number of the TV. Using the registration number, movies can be
rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
(Only DivX files matched with the registration code of the purchased TV are playable.)
NOTE
Movie files are supported as follows
Resolution : under 1920x1080 WxH pixels
Frame rate : under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00,
Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson H.263/H.264.
Press the MENU/EXIT button to return to normal TV viewing.
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
Movie List
Music List
Photo List
MY MEDIA
Exit
Option
Press OK( ) to see photos from the USB.
1
Select MY MEDIA.
BLUE
2
Select DivX Reg. Code.
3
Display DivX Reg. Code.
Previous
DivX Reg.Code
Deactivation
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by DivX,Inc. This
is an official DivX Certified device that plays DivX video. Visit www.divx.com
for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
device must be reg-
istered in order to play DivX Video-on-Demand (VOD) content. To generate
the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and
learn more about DivX VOD.
“DivX Certified to play DivX video up to HD 1080p, including premium content”
“Pat. 7,295,673; 7,460,688; 7,519,274”
85
TO USE A USB DEVICE
DEACTIVATION
(Only 19/22/26/32LE3
***
, 32/37/42LE4
***
, 22/26LE5
***
, 32/37/42/47/55LE5
***
)
The purpose of deactivation is to allow deactivation of devices for users who have activated all the
available devices through the web_server and are blocked from activating more devices. DivX VOD
allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any
of those devices, the consumer had to contact DivX Support and request deletion. Now with this
added feature, consumers will be able to deactivate the device themselves and hence better manage
their DivX VOD devices.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Movie List Music ListPhoto List
MY MEDIA
Exit
Option
Press OK( ) to see photos from the USB.
1
Select MY MEDIA.
BLUE
2
Select Deactivation.
3
Select Yes.
4
Display Deactivation.
Previous
DivX Reg.Code
Deactivation
Yes No
Shows current programme information
Displayed with a Teletext Programme.
Displayed with a Subtitle Programme.
Displayed with a Scramble Programme.
Displayed with a Dolby Digital Programme.
Displayed with a TV or DTV Programme.
Displayed with a Radio Programme.
Displayed with a MHEG Programme.
Displayed with a MPEG Programme.
Aspect
ratio of broadcasting programme.
Displayed with a Dolby Digital PLUS Programme.
Aspect ratio of broadcasting programme. 576i/p, 720p, 1080i/p : Resolution of broadcasting programme
Broadcasted programme with the icon may not be displayed in Monitor Out depending on the informa-
tion of the programme.
86
EPG(ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible
viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In
addition, detailed information about the programme is often available in the EPG (the availability and
amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
You must set the Clock in the Time menu, before using EPG function.
The EPG displays the programme details for 8 days.
Shows next programme information.
Shows other programme information.
DTV 1 TV ONE
Good Morning
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
21:00
00:00 Show/Game Show
Watch
► Next
Pr. Change
16:9
720p
...
MPEG
Up
Down
A pop-up window for record/remind settings
appear.
Select Timer Record/Remind setting mode.
DTV 2 TV2
Tyra
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
21:00
00:00 Show/Game Show
Schedule
◄ Now
Pr. Change
Tyra
2 TV2
28 Sep. 2008 21:00~00:00
Close
Remind
Record
MPEG
87
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Switch on/off EPG
Select a programme
1
Switch on or off EPG.
or
1
Select desired programme.
Button Function in NOW/NEXT Guide Mode
You can view a program being broadcasted and one scheduled to follow.
RED
Change EPG mode.
YELLOW
Enter Manual Timer mode.
BLUE
Enter Schedule List mode.
When ‘Now’ is selected, it is moved to
selected program and EPG disappears
When ‘Next’ is selected, a reservation
pop-up window appears.
Select NOW or NEXT Programme.
Select the Broadcast Programme.
Page Up/Down.
or or
Switch off EPG.
Select DTV or RADIO Programme.
Detail information on or off
Programme Guide
ALL
NOW
NEXT
1 YLE TV1
Keno
World Business
2 YLE TV2
4 TV..
Your World Today
Fantomen
Legenen om Den....
Kritiskt
Naturtimmen
ABC
Lyssna
Tänään otsikoissa
Glamour
5 YLE FST
6 CNN
8 YLE24
That ’70s show
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
25 Nov. 2008 10:05
RADIOWatch/Schedule
TV/RAD
Favourite
FAV
Manual Timer Schedule List
i Information
INFO
Mode
That ’70s show
88
EPG (ELECTRONIC PROGRAMME GUIDE)
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in 8 Day Guide Mode
RED
Change EPG mode.
GREEN
Enter Date setting mode.
YELLOW
Enter Manual Timer mode.
BLUE
Enter Schedule List mode.
When ‘Currently broadcasting programme
is selected, it is moved to selected pro-
gramme and EPG disappears
When ‘Future broadcasting programme is
selected, a reservation pop-up window
appears.
Select Programme.
Select the Broadcast Programme.
Page Up/Down.
or or
Switch off EPG.
Select DTV or RADIO Programme.
Detail information on or off
Programme Guide
1 YLE TV1
2 YLE TV2
4 TV..
5 YLE FST
6 CNN
8 YLE24
Kungskonsumente
Mint Extra
The Drum
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
... ... ... ... Tänään otsikoissa
ALL
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
25 Nov. 2008 10:05
That ’70s show
Tue. 25 Nov.
14:00 15:00
Antigues Roadshow
RADIOWatch/Schedule
TV/RAD
Favourite
FAV
Manual Timer Schedule List
i Information
INFO
Mode
Date
89
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Date Change Mode
Programme Guide
1 YLE TV1
2 YLE TV2
4 TV..
5 YLE FST
6 CNN
8 YLE24
Kungskonsumente
Mint Extra
The Drum
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
... ... ... ... Tänään otsikoissa
ALL
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
25 Nov. 2008 10:05
That ’70s show
Tue. 25 Nov.
14:00 15:00
Antigues Roadshow
Button Function in Extended Description Box
The detail information on or off.
Text Up/Down.
Select Timer Record/Remind setting mode.
or
Switch off EPG.
DTV 1 YLE TV1 25
25 Nov. 2008 10:05
Fia World Touring Car Chanpionship
Tue. 25 Nov. 2008 10:05 12:40
Fia Champion
Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's
Haunted house/Cry of The Swamp; Miss Gotto's Haunted
house/Cry of The Swamp; Miss Gotto's Haunted house/Cry
of The Swamp; Miss Gotto's Haunted house/Cry of The
Swamp; Miss Gotto's Haunted house/Cry of The Swamp;
Remind Record Close
Date Change
Date Exit
or or
Switch off Date setting
mode.
Change to the selected date.
Select a date.
or
Switch off EPG.
GREEN
90
EPG (ELECTRONIC PROGRAMME GUIDE)
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Record/Remind Setting Mode
Sets a start or end time for recording, and sets only a start time for the reminder with the end time
grayed out.
This function is available only when recording equipment that use pin8 recording signalling has been
connected to the TV-OUT(AV1) terminal, using a SCART cable.
Recording function is only supported in the Digital mode and not in the Analogue mode.
Switch off Manual Timer mode.
Select Remind or Record function setting.
Select Type, Start Time, End time or
Programme.
YELLOW
Change to Guide mode.
BLUE
Change to Schedule List mode.
Save Timer Record/Remind.
Manual Timer
ExitMove
Programme Guide Schedule List
OK
Wed. 12 Aug. 2009 13:46
Select the date to schedule.
Sun.
09 10 11
Mon. Tue. Wed. Thu. Fri. Sat.
12 13 14 15
22
29
05
21
28
04
20
27
03
19
26
02
18
25
01
17
24
31
16
23
30
Wed. 12 Aug. 2009
No schedule list
OK
Prev.
Select a schedule type
Start TimeType
17 : 30
DTV 801 ANTV D...
End Time Programme
15 : 09Record
Close
91
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Schedule List Mode
If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even
when you are watching a different programme at the time.
Currently recording item cannot be edited or deleted.
YELLOW
Change to Manual Timer mode.
BLUE
or
Change to Guide mode.
Switch off Schedule List.
Select your desired Option(Modify/Delete/
Delete All).
Select programme.
Page Up/Down.
Title
Repeat
Start Date
6 May 16:00 Friend1
6 May 18:00 Friend2
Start Time
Manual Timer Programme Guide
Page1/1
Fri. 6 Apr. 2007 15:09
Exit
Modify/Delete
Remind
DTV 19 Dave
(Fri.)06/05/2007
16:00
Page Change
P
Move
Schedule List
Modify
Delete
Delete All
Close
Modify
Friend2
16:00
92
PICTURE CONTROL
PICTURE CONTROL
16:9
The following selection will allow you to adjust the pic-
ture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there
is noise in original Picture, You
can see the noise at the edge.
Original
When your TV receives a wide screen signal it will auto-
matically change to the picture format broadcast.
Full Wide
When TV receives the wide screen signal,it will lead you
to adjust the picture horizontally or vertically, in a linear
proportion,to fill the entire screen fully.
4:3 and 14:9 video is supported in full screen without
any video distortion through DTV input.
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
Just Scan
Original
Full Wide
You can also adjust Aspect Ratio in the
PICTURE menu.
For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After com-
pleting Zoom Setting, the display goes
back to Q.Menu.
1
Select Aspect Ratio.
2
Select the desired picture format.
93
PICTURE CONTROL
4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ratio.
14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is moved to the
up and down.
Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom
of the picture will be cropped.
Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
◄ or ► button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1 to 16.
▼ or button: Move the screen.
NOTE
You can only select 4:3, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in Component mode.
You can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in HDMI mode.
You can only select 4:3, 16:9 (Wide) in RGB-PC, HDMI-PC mode only.
In DTV/HDMI/Component (over 720p) mode, Just Scan is available.
In Analogue/DTV/AV/Scart mode, Full Wide is available.
94
PICTURE CONTROL
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not
applied.
Picture Wizard
With Picture Wizard, you can adjust the picture quality of
the original image.
Next
Previous
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
• If you stop the setting before the final stage,
the changes will not be applied
The adjustment value is saved to Expert1.
Once the Picture Wizard sets the image
quality, the Energy Saving is changed into
Off.
If the picture quality setting of Expert1 is
changed, use the Picture Reset before
entering the Picture Wizard to reset the
picture quality setting.
Standard : mode to set standard picture
quality.
Preferred : mode to set user preferred
picture quality rather than standard pic-
ture.
1
Select PICTURE.
2
Select Picture Wizard.
3
Adjust Standard(Black Level,
White Level, Tint, Colour,
Horizontal Sharpness, Vertical
Sharpness, Backlight) or
Preferred(Black Level, White
Level, Tint, Colour, Sharpness,
Dynamic Contrast, Colour
Temperature, Backlight).
4
Select input source to apply
the settings.
5
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
Picture Wizard
95
PICTURE CONTROL
ENERGY SAVING
It reduces the TV’s power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting
the Picture Mode.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is
finished.
Selecting Screen Off while tuned to a radio station channel will reduce power consumption.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start.
• If you adjust “Energy Saving-Auto, Maximum, Backlight feature will not work.
You can also adjust this feature by selecting Energy Saving button on the remote control.
• When selecting Auto, Backlight is automatically adjusted through intelligent sensor according to the
surrounding condition when intelligent sensor is in the TV. (Only 32/42/46/52/60LD5
***
, 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
).
1
Select PICTURE.
2
Select
Energy Saving.
3
Select Auto(Only 32/42/46/52/60LD5
***
, 32LE3
***
, 32/37/42LE4
***
,
32/37/42/47/55LE5
***
)., Off, Minimum , Medium, Maximum or Screen
Off.
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
Energy Saving : Off
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
Energy Saving : Off
Auto
Off
Minimum
Medium
Maximum
Screen Off
Off
96
PICTURE CONTROL
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture.
Standard The most general screen display status.
Cinema Optimizes video for watching movies.
Sport Optimizes video for watching sports events.
Game Optimizes video for playing games.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the
Picture Mode menu based on the programme category.
When the Intelligent sensor function is on, the most suitable picture is automatically adjusted
according to the surrounding conditions.
You can also adjust Picture Mode in the Q. Menu.
Intelligent Sensor : Adjusts picture according to the surrounding conditions.
1
Select PICTURE.
2
Select Picture Mode.
3
Select Intelligent Sensor(Only 32/42/46/52/60LD5
***
,
32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
),
Vivid, Standard, Cinema, Sport or Game.
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
Picture Mode : Standard
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
Picture Mode : Standard
Intelligent Sensor
Vivid
Standard
Cinema
Sport
Game
Expert1
Expert2
Standard
97
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright
part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Colour Temp.
Adjust to left direction to make a picture reddish or adjust to right direction to make a picture bluish.
It is not available to use this function in “Intelligent Sensor (Only 32/42/46/52/60LD5
***
, 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
).
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Benefits of using Backlight
- The electricity consumption is reduced by
up to 60 %.
- The black brightness is reduced. (As the
black has greater depth, you can enjoy a
better quality definition.)
- You can adjust brightness with maintaining
original signal resolution.
NOTE
You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
When the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness,
H Sharpness, V
Sharpness
, Colour or Tint.
1
Select PICTURE.
2
Select Picture Mode.
3
Select Vivid, Standard, Cinema,
Sport or Game.
4
Select Backlight, Contrast,
Brightness, Sharpness, Colour,
Tint or
Colour Temp.
.
5
Make appropriate adjustments.
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
Picture Mode : Standard
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
Picture Mode : Standard
Intelligent Sensor
Vivid
Standard
Cinema
Sport
Game
Expert1
Expert2
Standard
98
PICTURE CONTROL
PICTURE CONTROL
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp.
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Advanced Control
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special
video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the
“Picture Reset” function for each Picture Mode.
Image shown may differ from your TV.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Advanced Control.
3
Select your desired Source.:
Dynamic Contrast, Dynamic Colour, Clear White, Skin Colour, Noise Reduction,
Digital Noise Reduction, Gamma, Black Level, Eye Care, Real Cinema, Colour
Gamut or xvYCC. (Refer to p. 100 to 101)
4
Make appropriate adjustments.
Dynamic Contrast
Medium
Dynamic Colour
Medium
Skin Colour
0
Noise Reduction
Medium
Digital Noise Reduction
Medium
Black Level
Auto
Clear White
Off
Gamma
Medium
Close
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Advanced Control
99
PICTURE CONTROL
EXPERT PICTURE CONTROL
By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
Image shown may differ from your TV.
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 90
• Brightness 50
H Sharpness 70
PICTURE
Picture Mode : Expert1
OK
Move
PICTURE
H Sharpness 70
• V Sharpness 60
• Colour 60
• Tint 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
• Expert Control
Dynamic Contrast
Medium
Noise Reduction
Medium
Digital Noise Reduction
Medium
Black Level
Auto
Real Cinema
On
Edge Enhancer
Expert Pattern
High
Off
xvYCC
Auto
Colour Gamut
EBU
Close
Intelligent Sensor
Vivid
Standard
Cinema
Sport
Game
Expert1
Expert2
Expert1
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Picture Mode.
3
Select Expert1 or Expert2.
4
Select Expert Control.
5
Select your desired Source.
6
Make appropriate adjustments.
100
PICTURE CONTROL
PICTURE CONTROL
*This feature is not available for all models.
Dynamic Contrast
(Off/Low/Medium/High)
Adjusts the contrast to keep it at the best level according to the brightness of
the screen. The picture is improved by making bright parts brighter and dark
parts darker.
Dynamic Colour
(Off/Low/High )
Adjusts screen colours so that they look livelier, richer and clearer. This fea-
ture enhances hue, saturation and luminance so that red, blue, green and
white look more vivid.
Skin Colour
(-5
to
5)
Adjusts skin colour of the picture so that user can set his favourite skin colour.
Noise Reduction
(Off/Low/Medium/High/
Auto
(In Analogue Mode
Only)
)
Reduces screen noise without compromising video quality.
Digital Noise Reduction
(Low/Medium/High/Off)
Reduces noise regarding MPEG compressed video.
Gamma
(Advanced Control:
Low/Medium/High
Expert Control:
1.9/2.2/2.4 )
You can adjust brightness of dark area and middle gray level area of the picture.
Low/1.9 : Makes dark and middle gray level area of the picture brighter.
Medium/2.2 : Expresses original picture levels.
High/2.4: Make dark and middle gray level area of the picture darker.
Black Level
(Low/High/Auto)
Low : The picture of the screen gets darker.
High : The picture of the screen gets brighter.
Auto : Sets black level of the screen to High or Low automatically according to
the input signal level.
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode:
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
Clear White
(Off/Low/High)
Makes the white area of the screen brighter and clearer.
Eye Care
(Low/High/Off)
*This feature is not available for all models.
Adjusts the brightness of the screen automatically to the best level for
eyes when the screen is too bright.
This feature is disable inPicture Mode-Vivid, Cinema, Expert1, Expert2,
Intelligent Sensor(Only 32/42/46/52/60LD5
***
, 32LE3
***
, 32/37/42LE4
***
,
32/37/42/47/55LE5
***
)”.
Real Cinema
(On/Off)
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch film-originated movie contents.
This function can work when TruMotion is off.
101
PICTURE CONTROL
Colour Gamut
(Advanced Control:
Wide/Standard)
Standard : Mode to use original colour area regardless of the display char-
acteristics.
Wide: Mode to use maximum colour area of the TV display.
Maximize the utilization for colour area that can be expressed.
Colour Gamut
(Expert Control: EBU/
SMPTE/BT709/Wide/
Standard)
Standard : Mode to use original colour area regardless of the display char-
acteristics.
Wide : Mode to use maximum colour area of the TV display.
EBU : Mode to display EBU colour area.
SMPTE : Mode to display SMPTE colour area.
BT709 : Mode to display BT709 colour area.
Edge Enhancer
(Off/Low/High)
Makes the edge of the picture clearer and distinctive.
This function can use in “Picture Mode-Expert.”
xvYCC
(Auto/off/on)
*This feature is not available for all models.
This is the function to express richer colour.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC sig-
nal is inputted through HDMI
Expert Pattern
(Off/Pattern1/Pattern2)
This is the pattern necessary for checking the picture of Digital TV.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
(Off/Red/Green/Blue)
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Colour Temperature
(Medium/Warm/Cool)
This is the function to adjust the overall colour of the screen to the feeling you want.
a. Method : 2 Points
Pattern: Inner, Outer
Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50
to
+50.
b.
Method : 10 point IRE
Pattern: Inner / Outer
IRE (Institute of Radio Engineers) is the unit to display the size of the video sig-
nal and can be set among 10, 20, 30
to
100. You can adjust Red, Green or Blue
according to each setting.
Luminance: This function displays calculated luminance value for 2.2 gamma.
You can input luminance value you want at 100 IRE, than the target luminance
value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50
to
+50.
Colour Management
System
As the tool used by the experts to make adjustments by using the test pat-
terns, this does not affect other colours but can be used to selectively
adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjust-
ments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment
range is -30
to
+30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment
range is
-30
to
+30.
This feature is disable in RGB-PC and HDMI (PC) mode.
102
PICTURE CONTROL
PICTURE CONTROL
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp.
• Advanced Control
• Picture Reset
• TruMotion
• Screen
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Picture Reset.
3
Select Yes.
4
Initialize the adjusted value.
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Picture Reset
R G
W
C
• Picture Reset
All picture setting will be reset.
Continue?
Yes No
?
103
PICTURE CONTROL
TRUMOTION
(Only 32/42/46/52/60LD5
***
, 32/37/42/47/55LE5
***
)
It is used for the best picture quality without any motion blur or judder when you enter a quick image
or Film Source.
High : Provide smoother picture movement.
Low : Provide smooth picture movement. Use this setting for standard use.
Off : Turn off TruMotion Operation.
User : User can adjust Judder and Blur level in TruMotion Operation, separately.
- Judder : Adjust noise of the screen.
- Blur : Adjust after-image of the screen.
This feature is disable in RGB-PC,HDMI-PC mode.
If you enable "
TruMotion", noise may appear on the screen.
If this occurs, set "
TruMotion" to "Off".
If you select Picture Mode-Game ”, set TruMotion" to "Off".
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select TruMotion.
3
Select Low, High, User or Off.
4
Make appropriate adjustments.
TruMotion
Low
Judder 3
Blur 3
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• TruMotion
OK
104
PICTURE CONTROL
PICTURE CONTROL
POWER INDICATOR
Adjust the power/standby indicator light on the front of the TV.
Standby Light
Determines whether to set the indicator light on the front of the TV to On or Off in standby mode.
Power Light
Determines whether to set the indicator light on the front of the TV to On or Off when the power turns
on.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select OPTION.
2
Select Power Indicator.
3
Select Standby Light or Power Light.
4
Select your desired Source.
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Power Indicator
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Power Indicator
Standby Light
On
On
Close
Power Light
105
PICTURE CONTROL
MODE SETTING
We recommend setting the TV to Home Use mode for the best picture in your home environment.
Store Demo mode is an optimal setting for displaying at stores.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select OPTION.
2
Select Mode Setting.
3
Select Store Demo or Home Use.
4
Save.
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Mode Setting : Home Use
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Mode Setting : Home Use
Off
Close
Demo Mode
Selecting the environment.
Choose the setting mode you want.
Select [Home Use] to use this TV at home. To use
this TV at store, select [Store Demo].
Home Use
Store Demo
106
PICTURE CONTROL
PICTURE CONTROL
DEMO MODE
It is not possible to use Demo Mode in Home Use mode.
In Store Demo, Demo Mode is automatically set to On.
Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is
reset.
The screen is reset automatically after 5 minutes in Demo Mode.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Mode Setting : Home Use
On
Close
Demo Mode
Selecting the environment.
Choose the setting mode you want.
Select [Store Demo] to use this TV in store.
To use this TV at home, select [Home Use].
1
Select OPTION.
2
Select Mode Setting.
3
Select Store Demo.
4
Select On.
5
Move to the previous menu screen.
If you want to stop the demo, press any button.
(except for MUTE,
+ , - button)
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Mode Setting : Home Use
Home Use
Store Demo
107
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each programme.
If sound quality or volume is not at the level you want, it is recommended to use a separate home the-
ater system or amp to cope with different user environments.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select AUDIO.
2
Select Auto Volume.
3
Select On or Off.
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Auto Volume : Off
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Auto Volume : Off
MHEG
On
Off
108
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
Adjustment for Clear Voice Level With selecting On
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
If you select “Onfor Clear Voice II,
Infinite Sound feature will not work.
Select levels from ‘-6’ to ’+6’.
1
Select AUDIO.
2
Select Clear Voice II.
3
Select On or Off.
4
Select Level.
5
Make desired adjustment.
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Clear Voice II : Off 3
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Clear Voice II : Off 3
Off
Close
Level 3
Clear Voice II
-
+
109
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can
also adjust the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appro-
priate sound options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard Offers standard-quality sound.
Music Optimizes sound for listening to music.
Cinema Optimizes sound for watching movies.
Sport Optimizes sound for watching sports events.
Game Optimizes sound for playing games.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
You can also adjust Sound Mode in the Q.
Menu.
1
Select AUDIO.
2
Select Sound Mode.
3
Select Standard, Music, Cinema, Sport or
Game.
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
Sound Mode : Standard
L R
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
Sound Mode : Standard
L R
Standard
Music
Cinema
Sport
Game
Standard
110
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT -USER MODE
INFINITE SOUND
Select this option to sound realistic.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Infinite Sound : Infinite Sound is a patented
LG proprietary sound processing technology
that strives immersive 5.1 surround sound
impression with front two loudspeakers.
1
Select AUDIO.
2
Select Sound Mode.
3
Select Standard, Music, Cinema, Sport or
Game.
4
Select Treble or Bass.
5
Set the desired sound level.
1
Select AUDIO.
2
Select Infinite Sound.
3
Select On or Off.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
Sound Mode : Standard(User)
L R
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
Sound Mode : Standard(User)
L R
Standard
Music
Cinema
Sport
Game
Standard(User)
111
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select AUDIO.
2
Select Balance.
3
Make desired adjustment.
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
Balance 0
L R
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
Balance 0
L R
Balance 0
Close
L R
112
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational
even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
NOTE
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automati-
cally switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the
TV speaker.
Some menus in AUDIO are disabled when TV Speaker is set to Off.
1
Select AUDIO.
2
Select TV Speaker.
3
Select On or Off.
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
TV Speaker : On
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
TV Speaker : On
Off
PCM
On
113
SOUND & LANGUAGE CONTROL
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
When different audio types exist in an input signal, this function allows you to select the audio type
you want.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Auto: Automatically outputs in the order Dolby Digital+ > Dolby Digital > MPEG.
(Except for Italy)
Auto: Automatically outputs in the order Dolby Digital+ > MPEG > Dolby Digital.(Only Italy)
Dolby Digital+, Dolby Digital, MPEG: Allows users to select the audio type they want.
ex) If MPEG is selected, MPEG is always outputted.
If MPEG is not supported, another audio type is set in that order.
Refer to p. 120 to 121 (Audio Language Selection)
1
Select AUDIO.
2
Select DTV Audio Setting.
3
Select Auto, Dolby Digital +, Dolby Digital or MPEG.
OK
Move
Sound Mode : S tandard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
DTV Audio Setting : Auto
OK
Move
Sound Mode : S tandard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
DTV Audio Setting : Auto
Auto
MUTE
Dolby Digital+
Dolby Digital
MPEG
Auto
114
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony
Philips Digital InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will
be PCM(Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby
Digital Audio, only Dolby Digital will be played.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Item Audio Input Digital Audio output
Auto(Speaker On)
MPEG
Dolby Digital
Dolby Digital Plus
P
CM
Dolby Digital
Dolby Digital
PCM
Auto(Speaker Off)
MPEG
Dolby Digital
Dolby Digital Plus
P
CM
Dolby Digital
Dolby Digital
Dolby Digital
PCM
All PCM
1
Select AUDIO.
2
Select Digital Audio Out.
3
Select Auto or PCM.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital audio of
the DVD player to PCM. (In HDMI, Dolby Digital
Plus is not supported).
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
Digital Audio Out : PCM
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
Digital Audio Out : PCM
Auto
PCM
PCM
115
SOUND & LANGUAGE CONTROL
Settings of the selected Sound Mode return to the default factory settings.
AUDIO RESET
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
• Reset
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
• Reset
All audio settings will be resetted.
Continue?
Yes No
?
1
Select AUDIO.
2
Select Reset.
3
Select Yes.
4
Initialize the adjusted value.
116
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describing the current situation in a TV
programme in addition to the basic audio.
When Audio Description On is selected, basic audio and Audio Description are provided only for those
programmes that have Audio Description included.
Volume Changes the Audio Description volume
Beep Beeps when a programme with Audio Description information is selected
Adjustment for Audio Description Volume With selecting On
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select OPTION.
2
Select Disability Assistance.
3
Select Audio Description.
4
Select Volume or Beep.
5
Make desired adjustment.
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Disability Assistance
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Disability Assistance
Close
• Volume 0
Hard of Hearing(
)
• Beep
Off
Off
- +
Audio Description
On
117
SOUND & LANGUAGE CONTROL
I/II
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the
clarity of sound is improved.
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I,
DUAL II or DUAL I+II.
DUAL I Sends the primary broadcast language to the loudspeakers.
DUAL II Sends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.
STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme
number and station name.
Broadcast On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
1
Select
Audio or Audio Language
.
2
Select the sound output.
118
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
NICAM RECEPTION (IN ANALOGUE MODE ONLY)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and
right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
1
When NICAM mono is received, you can select NICAM MONO or FM MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or FM MONO.
119
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE / COUNTRY
SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
* If you want to change Language/ Country selection
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
NOTE
If you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever the
TV is switched on.
If you select the wrong local country, teletext may not appear correctly on the screen and some problems
may occur during teletext operation.
The CI (Common Interface) function may not be applied based on country broadcasting circumstances.
DTV mode control buttons may not function based on country broadcasting circumstances.
In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on
digital broadcasting circumstances.
The Country Setting "UK" should only be activated in UK.
If the country setting is set to "--", European terrestrial digital standard broadcasting programmes are avail-
able, but some DTV functions may not work properly.
1
Select your desired language.
2
Select your country.
1
Select OPTION.
2
Select Language(Language).
3
Select Menu Language.
4
Select your desired language.
5
Save.
1
Select OPTION.
2
Select Country.
3
Select your country.
4
Select Yes or No.
5
Save.
120
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
120
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a
selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language and Text
Language are not supported, you can select language in secondary category.
In Digital mode, use the
Text
language function when two or more
Text
languages are broadcast. If tele-
text data in a selected language is not broadcast, the default
Text
language page will be displayed.
Press the BACK button to move to the previous menu screen.
LANGUAGE SELECTION
1
Select OPTION.
2
Select Language(Language).
3
Select Audio Language, Subtitle
Language or Text Language(Except
for UK).
4
Select your desired language.
5
Save.
1
Select OPTION.
2
Select Disability Assistance.
3
Select
Hard of Hearing
( )
.
4
Select On or Off.
121
SOUND & LANGUAGE CONTROL
< Audio Language Selection >
When two or more audio languages are broadcast, you can
select the audio language.
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service pro-
vider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of
the Main audio.
< Subtitle Language Selection >
When two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLE button
on the remote control.
Press the button to select a subtitle language.
Subtitle Language OSD Information
Audio Language OSD Information
Display Status
N.A Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
Display Status
N.A Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing”
1
Select
Audio or Audio Language
.
Select an audio language.
2
MUTE
122
CLOCK SETUP
TIME SETTING
The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock
manually in Manual mode.
You must set the time correctly before using on/off timer function.
The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean
Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
When if the city name in Time Zone is changed into offset, you can change time by 1 hour.
Time Zone menu can be changed in Auto mode.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select TIME.
2
Select Clock.
3
Select Auto or Manual.
4
Select either the year, month, date, time or Time Zone option.
5
Set the year, month, date, time or Time Zone option.
OK
Move
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
TIME
Clock
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
TIME
Clock
TIME SETTING
OK
Move
Date
3
Month
Mar.
Year
2008
Hour
16
Minute
09
Time Zone
London
Close
Auto
OK
Move
GMT
123
TIME SETTING
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to stand-
by mode unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
To cancel On/Off Time function, select Off.
For On Time function only
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select TIME.
2
Select Off Time or On Time.
3
Select Repeat.
4
Select Off, Once, Daily, Mon. ~ Fri.,
Mon. ~ Sat., Sat. ~ Sun. or Sun..
5
Set the hour.
6
Set the minutes.
1
Select Input.
2
Select the input source.
3
Set the programme.
4
Adjust volume level at switch-on.
OK
Move
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
TIME
On Time : Off
OK
Move
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
TIME
On Time : Off
Repeat
Off
Hour
00
Minute
00
Input
Antenna
Programme
TV1
Volume
30
Close
1 Mar. 2007 16:09
124
TIME SETTING
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
When you switch the TV off, the preset sleep timer is cancelled.
You can also adjust Sleep Timer in the TIME menu.
1
Select Sleep Timer.
2
Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.
125
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’,‘0’,‘0’,‘0’ on the remote control handset.
When France is selected for Country, password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’.
When France is selected for Country, password cannot be set as ‘0’,‘0’,‘0’,‘0’ .
If a channel is locked, enter the password to unlock it temporarily.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select LOCK.
2
Select Lock System.
3
Select On.
4
Set the password.
5
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
If you forget your password, press ‘0’, ‘3’,
‘2’, ‘5’ on the remote control handset.
OK
Move
Set Password
Lock System : Off
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Lock System : Off
OK
Move
Set Password
Lock System : Off
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Lock System : Off
Off
On
Off
126
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL / RATINGS
BLOCK PROGRAMME
Blocks any programme that you do not want to watch or that you do not want your children to watch.
It is available to use this function in Lock System On”.
Enter a password to watch a blocked programme.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select LOCK.
2
Select Lock System.
3
Enter the Block Progra mme.
4
Enter the Block Programme.
5
YELLOW
Select a programme to be locked.
OK
Move
Set Password
Lock System : On
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Block Programme
Page Change
P
Navigation
Previous
Block/Unblock
Pr. Change
DTV
RADIO
TV
1 Nine Digital
4 7 Digital
7 7 Digital2
2 Nine Digital HD
5 7 HD Digital
8 7 Digital3
3 Nine Guide
6 7 Digital 1
9 7 Guide
Page 1/1
Programme Edit
Favourite Group :
C
Page Change
P
Navigation
Previous
Block/Unblock
Pr. Change
Cable DTV
Cable Radio
Cable TV
1 Nine Digital
4 7 Digital
7 7 Digital2
2 Nine Digital HD
5 7 HD Digital
8 7 Digital3
3 Nine Guide
6 7 Digital 1
9 7 Guide
Page 1/1
Programme Edit
Favourite Group :
C
or
127
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select LOCK.
2
Select Lock System.
3
Select Parental Guidance.
4
Make appropriate adjustments.
This function operates according to information from the broadcasting station. Therefore if the signal
has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
Enter a password to watch a blocked programme.
Rating differs by country.
OK
Move
Set Password
Lock System : On
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Parental Guidance : Blocking Off
OK
Move
Set Password
Lock System : On
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Parental Guidance : Blocking Off
Blocking Off : Permits all
programmes
Blocking Off
12 and above
13 and above
14 and above
15 and above
16 and above
17 and above
18 and above
Programmes for 18 and above will
be blocked
12 and above
13 and above
14 and above
15 and above
16 and above
17 and above
18 and above
18 and above
(Except for France) (Only France)
128
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL / RATINGS
EXTERNAL INPUT BLOCKING
Enables you to block an input.
It is available to use this function in
Lock SystemOn.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select LOCK.
2
Select Lock System.
3
Select Input Block.
4
Select input source.
5
Select On or Off.
OK
Move
Set Password
Lock System : On
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Input Block
OK
Move
Set Password
Lock System : On
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Input Block
AV1
AV2
AV3
Component
RGB
HDMI1
HDMI2
HDMI3
HDMI4
Off
Off
Off
Off
Off
Off
Off
Close
Off
Off
Image shown may differ from your TV.
129
PARENTAL CONTROL / RATINGS
KEY LOCK
This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so
that it can only be used with the remote control.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
In Key Lock On’, if the TV is turned off, press the
/ I
, INPUT, P
(
or P
) button on the TV or
POWER, INPUT, P
or NUMBER buttons on the
remote control then the set will be turned on.
With the Key Lock On, the display
Key
Lock On appears on the screen if any button on
the front panel is pressed while viewing the TV.
When another OSD is displayed, Key Lock On
will not operate.
1
Select LOCK.
2
Select Key Lock.
3
Select On or Off.
OK
Move
Set Password
Lock System : Off
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Key Lock : Off
OK
Move
Set Password
Lock System : Off
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Key Lock : Off
Off
On
Off
130
TELETEXT
TELETEXT
This feature is not available in all countries.
Press the TEXT button to switch to teletext. The initial page or last page
viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the sec-
ond shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode reappears.
SWITCH ON/OFF
Page selection
Enter the desired page number as a three digit number with the NUMBER buttons. If during selec-
tion you press a wrong number, you must complete the three digit number and then re-enter the
correct page number.
The P button can be used to select the preceding or following page.
SIMPLE TEXT
1
2
Teletext is a free service broadcast by most TV stations which gives up-to-the-
minute information on news, weather, television programmes, share prices and
many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems. SIMPLE (standard teletext) consists of a number of pages which are
selected by directly entering the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy selection of
teletext information.
Image shown
may differ from
your TV.
131
TELETEXT
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow
field denotes the next group and the blue field indicates the next block.
Block / group / page selection
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next
group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
4
1
2
3
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
Page selection
Press the T.OPT button and then use button to select menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding
coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with
the NUMBER buttons in FASTEXT mode.
The P button can be used to select the preceding or following page.
4
1
2
3
132
TELETEXT
TELETEXT
SPECIAL TELETEXT FUNCTIONS
Index
Select the each index page.
Time
When viewing a TV programme, select this menu to display the time at the top right
hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page number is displayed at
the bottom of the screen. To hold or change the sub page, press the RED/GREEN,
< >
or NUMBER buttons.
Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below the
time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the
screen and the automatic page change is inactive.
Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at
the top left hand corner of the screen. When the updated page is available then display will change to
the page number. Select this menu again to view the updated teletext page.
Press the T. OPT button and then use button to select the Text Option menu.
In UK(In digital mode), T. OPT button does not work.
Text Option
Index
Time
Hold
Reveal
Update
Close
133
DIGITAL TELETEXT
DIGITAL TELETEXT
*This function works in UK, Ireland only.
The TV gives you access to digital teletext which is greatly improved in various aspects such as text,
graphics etc.
This digital teletext can access special digital teletext services and specific services which broadcast
digital teletext.
TELETEXT WITHIN DIGITAL SERVICE
TELETEXT IN DIGITAL SERVICE
1
Press the numeric or P
button to select a
digital service which broadcasts digital teletext.
2
Follow the indications on digital teletext and
move onto the next step by pressing TEXT,
OK,
, RED, GREEN, YELLOW, BLUE
or NUMBER buttons and etc..
3
To change digital teletext service, select a dif-
ferent service by the numeric or P button.
1
Press the numeric or P
button to select a
certain service which broadcasts digital teletext.
2
Press the TEXT or coloured button to switch on
teletext.
3
Follow the indications on digital teletext and move
onto the next step by pressing OK,
, RED,
GREEN, YELLOW, BLUE or NUMBER buttons and
so on.
4
Press the TEXT or colour button to switch off
digital teletext and return to TV viewing.
Some services may allow you to access text ser-
vices by pressing the RED button.
134
APPENDIX
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
The remote control
does not work
Check to see if there is any object between the TV and the remote con-
trol causing an obstruction. Ensure you are pointing the remote control
directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Install new batteries.
Power is suddenly
turned off
Is the sleep timer set?
Check the power control settings. Has the Power supply been interrupted.
If the TV is switched on and there is no input signal, it will switch off auto-
matically after 15 minutes.
The video function does not work.
No picture & No sound
Check whether the TV is switched on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted correctly into the mains?
Check your antenna direction and/or location.
Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly
after switching on
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
No or poor colour
or poor picture
Adjust Colour in menu option.
Allow a sufficient distance between the TV and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
Check for local interference such as an electrical appliance or power tool.
Poor reception on
some channels
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
Check for sources of possible interference.
Lines or streaks
in pictures
Check antenna (Change the position of the antenna).
No picture
when connecting
HDMI
Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are
not High Speed HDMI Cable, flickering or no screen display can result. Please
use the High Speed HDMI Cable.
135
APPENDIX
The audio function does not work.
Picture OK & No
sound
Press the + or - button.
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
No output from one
of the speakers
Adjust Balance in menu option.
Unusual sound from
inside the TV
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when con-
necting HDMI or USB
Check HDMI cable is High Speed HDMI Cable.
Check USB cable over version 2.0.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range
(Invalid format)
Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Use Auto configure or adjust clock, phase, or H/V position. (Option)
Screen colour is
unstable or single
colour
Check the signal cable.
Reinstall the PC video card.
There is a problem with PICTURE settings.
When the user chang-
es the picture settings,
the TV automatically
converts back to the
initial settings after a
certain period of time.
It means that the TV is currently set to Store Demo mode.
To switch to Home use mode you should do the followings:
From the TV Menu, choose OPTION -> Choose Mode Setting -> Choose
Home use. Now, you have completed switching to the Home use mode.
*This feature is not available for all models.
136
APPENDIX
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of luke-
warm water and a little fabric softener or dish washing detergent. Wring the cloth until it is
almost dry, and then use it to wipe the screen.
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate
before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Do not to use a wet cloth.
Extended Absence
2
1
CAUTION
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to
protect against possible damage from lightning or power surges.
137
APPENDIX
PRODUCT SPECIFICATIONS
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
19LD3
***
22LD3
***
19LD350-ZA / 19LD350N-ZA
19LD358-ZA / 19LD359-ZB
19LD350C-ZA / 19LD351-ZB
19LD351N-ZB
19LD340-ZA / 19LD341-ZB
19LD340N-ZA / 19LD341N-ZB
19LD348-ZA
22LD350-ZA / 22LD350N-ZA
22LD358-ZA / 22LD359-ZB
22LD350C-ZA / 22LD351-ZB
22LD351N-ZB
22LD340-ZA / 22LD341-ZB
22LD340N-ZA / 22LD341N-ZB
22LD348-ZA
Dimensions
(Width x Height x
Depth)
with stand
457.0 mm x 336.0 mm x 164.9 mm 526.0 mm x 377.0 mm x 164.9 mm
without stand
457.0 mm x 290.0 mm x 65.0 mm 526.0 mm x 331.0 mm x 65.0 mm
Weight
with stand
without stand
3.4 kg
3.1 kg
4.3 kg
4.0 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
30 W
AC 100-240 V~ 50 / 60 Hz
50 W
MODELS
26LD3
***
32LD3
***
26LD350-ZA / 26LD350N-ZA
26LD358-ZA / 26LD359-ZB
26LD350C-ZA /26LD351-ZB
26LD351N-ZB
26LD340-ZA / 26LD341-ZB
26LD340N-ZA / 26LD341N-ZB
26LD348-ZA
32LD350-ZA / 32LD350N-ZA
32LD358-ZA / 32LD359-ZB
32LD350C-ZA
32LD351-ZB / 32LD351N-ZB
32LD340-ZA / 32LD341-ZB
32LD340N-ZA / 32LD341N-ZB
32LD348-ZA
Dimensions
(Width x Height x
Depth)
with stand
663.0 mm x 484.0 mm x 206.8 mm 800.0 mm x 565.0 mm x 206.8 mm
without stand
663.0 mm x 423.0 mm x 79.9 mm 800.0 mm x 509.0 mm x 73.8 mm
Weight
with stand
without stand
7.3 kg
6.2 kg
9.2 kg
8.2 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
100 W
AC 100-240 V~ 50 / 60 Hz
120 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
138
APPENDIX
APPENDIX
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
32LD4
***
32LD420-ZA / 32LD420N-ZA
32LD428-ZA / 32LD420C-ZA
32LD421-ZB / 32LD421N-ZB
32LD450-ZA / 32LD450N-ZA
32LD458-ZA / 32LD450C-ZA
Dimensions
(Width x Height x
Depth)
with stand
805.0 mm x 583.0 mm x 224.0 mm 805.0 mm x 586.0 mm x 211.0 mm 799.0 mm x 555.0 mm x 207.0 mm
without stand
805.0 mm x 531.0 mm x 79.9 mm 805.0 mm x 531.0 mm x 79.9 mm 799.0 mm x 506.0 mm x 73.5 mm
Weight
with stand
without stand
10.8 kg
9.7 kg
10.8 kg
9.7 kg
9.1 kg
8.1 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
140 W
AC 100-240 V~ 50 / 60 Hz
140 W
AC 100-240 V~ 50 / 60 Hz
120 W
MODELS
37LD4
***
37LD420-ZA / 37LD420N-ZA
37LD428-ZA / 37LD420C-ZA
37LD421-ZB / 37LD421N-ZB
37LD450-ZA / 37LD450N-ZA
37LD458-ZA / 37LD450C-ZA
Dimensions
(Width x Height x
Depth)
with stand
922.0 mm x 659.0 mm x 297.0 mm 922.0 mm x 660.0 mm x 270.6 mm 916.0 mm x 625.0 mm x 261.0 mm
without stand
922.0 mm x 595.0 mm x 88.0 mm 922.0 mm x 595.0 mm x 88.0 mm 916.0 mm x 575.0 mm x 77.4 mm
Weight
with stand
without stand
14.0 kg
12.2 kg
14.0 kg
12.2 kg
12.5 kg
10.8 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
160 W
AC 100-240 V~ 50 / 60 Hz
160 W
AC 100-240 V~ 50 / 60 Hz
160 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
139
APPENDIX
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
42LD4
***
42LD420-ZA / 42LD420N-ZA
42LD428-ZA / 42LD420C-ZA
42LD421-ZB / 42LD421N-ZB
42LD450-ZA / 42LD450N-ZA
42LD458-ZA / 42LD450C-ZA
Dimensions
(Width x Height x
Depth)
with stand
1028.0 mm x 715.4 mm x 297.0 mm 1028.0 mm x 716.4 mm x 270.6 mm 1023.0 mm x 685.0 mm x 261.0 mm
without stand
1028.0 mm x 658.6 mm x 88.7 mm 1028.0 mm x 658.6 mm x 88.7 mm 1023.0 mm x 635.0 mm x 76.6 mm
Weight
with stand
without stand
17.3 kg
15.5 kg
17.3 kg
15.5 kg
15.1 kg
13.5 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
190 W
AC 100-240 V~ 50 / 60 Hz
190 W
AC 100-240 V~ 50 / 60 Hz
190 W
MODELS
47LD4
***
47LD420-ZA / 47LD420N-ZA
47LD428-ZA / 47LD420C-ZA
47LD421-ZB / 47LD421N-ZB
47LD450-ZA / 47LD450N-ZA
47LD458-ZA / 47LD450C-ZA
Dimensions
(Width x Height x
Depth)
with stand
1140.6 mm x 784.8 mm x 337.4 mm 1140.6 mm x 788.3 mm x 318.9 mm 1136.0 mm x 757.0 mm x 270.0 mm
without stand
1140.6 mm x 722.9 mm x 99.0 mm 1140.6 mm x 722.9 mm x 99.0 mm 1136.0 mm x 698.0 mm x 76.5 mm
Weight
with stand
without stand
21.6 kg
19.0 kg
21.6 kg
19.0 kg
19.5 kg
17.5 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
260 W
AC 100-240 V~ 50 / 60 Hz
260 W
AC 100-240 V~ 50 / 60 Hz
260 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
140
APPENDIX
APPENDIX
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
32LD5
***
32LD550-ZC / 32LD550N-ZC
32LD558-ZC / 32LD559-ZA
32LD551-ZA / 32LD551N-ZA
Dimensions
(Width x Height x
Depth)
with stand
800.0 mm x 563.0 mm x 207.0 mm 800.0 mm x 563.0 mm x 207.0 mm
without stand
800.0 mm x 503.0 mm x 74.7 mm 800.0 mm x 503.0 mm x 74.7 mm
Weight
with stand
without stand
9.7 kg
8.7 kg
9.7 kg
8.7 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
150 W
AC 100-240 V~ 50 / 60 Hz
150 W
MODELS
42LD5
***
42LD550-ZC / 42LD550N-ZC
42LD558-ZC / 42LD559-ZA
42LD551-ZA / 42LD551N-ZA
Dimensions
(Width x Height x
Depth)
with stand
1024.0 mm x 695.0 mm x 261.0 mm 1024.0 mm x 695.0 mm x 261.0 mm
without stand
1024.0 mm x 632.0 mm x 78.7 mm 1024.0 mm x 632.0 mm x 78.7 mm
Weight
with stand
without stand
15.4 kg
13.8 kg
15.4 kg
13.8 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
210 W
AC 100-240 V~ 50 / 60 Hz
210 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
141
APPENDIX
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
46LD5
***
46LD550-ZC / 46LD550N-ZC
46LD558-ZC / 46LD559-ZA
46LD551-ZA / 46LD551N-ZA
Dimensions
(Width x Height x
Depth)
with stand
1115.0 mm x 752.0 mm x 270.0 mm 1115.0 mm x 752.0 mm x 270.0 mm
without stand
1115.0 mm x 680.0 mm x 77.0 mm 1115.0 mm x 680.0 mm x 77.0 mm
Weight
with stand
without stand
18.6 kg
16.6 kg
18.6 kg
16.6 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
240 W
AC 100-240 V~ 50 / 60 Hz
240 W
MODELS
52LD5
***
52LD550-ZC / 52LD550N-ZC
52LD558-ZC / 52LD559-ZA
52LD551-ZA / 52LD551N-ZA
Dimensions
(Width x Height x
Depth)
with stand
1266.0 mm x 851.0 mm x 330.0 mm 1266.0 mm x 851.0 mm x 330.0 mm
without stand
1266.0 mm x 775.0 mm x 96.4 mm 1266.0 mm x 775.0 mm x 96.4 mm
Weight
with stand
without stand
26.9 kg
23.6 kg
26.9 kg
23.6 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
300 W
AC 100-240 V~ 50 / 60 Hz
300 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
142
APPENDIX
APPENDIX
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
60LD5
***
60LD550-ZC / 60LD550N-ZC
60LD558-ZC / 60LD559-ZA
60LD551-ZA / 60LD551N-ZA
Dimensions
(Width x Height x
Depth)
with stand
1441.0 mm x 963.0 mm x 345.0 mm 1441.0 mm x 963.0 mm x 345.0 mm
without stand
1441.0 mm x 877.0 mm x 109.0 mm 1441.0 mm x 877.0 mm x 109.0 mm
Weight
with stand
without stand
40.0 kg
35.7 kg
40.0 kg
35.7 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
380 W
AC 100-240 V~ 50 / 60 Hz
380 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
143
APPENDIX
MODELS
32LE4
***
37LE4
***
32LE4500-ZA / 32LE450N-ZA
32LE4508-ZA
37LE4500-ZA / 37LE450N-ZA
37LE4508-ZA
Dimensions
(Width x Height x
Depth)
with stand
786.0 mm x 559.0 mm x 221.0 mm 907.0 mm x 630.0 mm x 270.0 mm
without stand
786.0 mm x 500.0 mm x 39.9 mm 907.0 mm x 565.0 mm x 39.9 mm
Weight
with stand
without stand
11.2 kg
9.3 kg
13.8 kg
11.3 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
150 W
AC 100-240 V~ 50 / 60 Hz
180 W
MODELS
42LE4
***
42LE4500-ZA / 42LE4500N-ZA
42LE4508-ZA
Dimensions
(Width x Height x
Depth)
with stand
1018.0 mm x 692.0 mm x 270.0 mm
without stand
1018.0 mm x 627.0 mm x 35.3 mm
Weight
with stand
without stand
16.7 kg
14.2 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
150 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
Supported movie files
Refer to p. 54
to
55
The specifications shown above may be changed without prior notice for quality improvement.
144
APPENDIX
APPENDIX
MODELS
19LE3
***
19LE3300-ZA / 19LE330N-ZA
19LE3308-ZA
19LE3310-ZB / 19LE331N-ZB
Dimensions
(Width x Height x
Depth)
with stand
471.2 mm x 365.9 mm x 155.4 mm 471.2 mm x 365.9 mm x 155.4 mm
without stand
471.2 mm x 315.5 mm x 34.4 mm 471.2 mm x 315.5 mm x 34.4 mm
Weight
with stand
without stand
3.4 kg
3.2 kg
3.4 kg
3.2 kg
Power requirement
19LE3
***
: DC 24 V, 1.6A
AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz
MODELS
22LE3
***
22LE3300-ZA / 22LE330N-ZA
22LE3308-ZA
22LE5500-ZA / 22LE550N-ZA
22LE5508-ZA
22LE3310-ZB / 22LE331N-ZB
22LE5510-ZB / 22LE551N-ZB
22LE5518-ZB
Dimensions
(Width x Height x
Depth)
with stand
542.9 mm x 407.1 mm x 155.4 mm 542.9 mm x 407.1 mm x 155.4 mm
without stand
542.9 mm x 357.6 mm x 34.4 mm 542.9 mm x 357.6 mm x 34.4 mm
Weight
with stand
without stand
4.2 kg
3.9 kg
4.2 kg
3.9 kg
Power requirement
22LE3
***,
22LE5
***
: DC 24 V, 1.7A
AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
Supported movie files
Refer to p. 54
to
55
The specifications shown above may be changed without prior notice for quality improvement.
145
APPENDIX
MODELS
26LE3
***
26LE3300-ZA / 26LE330N-ZA
26LE3308-ZA
26LE5500-ZA / 26LE550N-ZA
26LE5508-ZA
26LE3310-ZB / 26LE331N-ZB
26LE5510-ZB / 26LE551N-ZB
26LE5518-ZB
Dimensions
(Width x Height x
Depth)
with stand
652.0 mm x 480.8 mm x 191.4 mm 652.0 mm x 480.8 mm x 191.4 mm
without stand
652.0 mm x 420.3 mm x 34.4 mm 652.0 mm x 420.3 mm x 34.4 mm
Weight
with stand
without stand
6.1 kg
5.1 kg
6.1 kg
5.1 kg
Power requirement
26LE3
***
: DC 24 V, 1.8A / 26LE5
***
: DC 24 V, 2.1A
AC-DC adaptor : 24 V , 3.42 A / AC 100-240 V~ 50 / 60 Hz
MODELS
32LE3
***
32LE5
***
32LE3300-ZA / 32LE330N-ZA
32LE3308-ZA
32LE5300-ZA / 32LE530N-ZA
32LE5308-ZA
32LE5310-ZB / 32LE531N-ZB
32LE5318-ZB
Dimensions
(Width x Height x
Depth)
with stand
771.8 mm x 552.3 mm x 221.0 mm 784.6 mm x 558.1 mm x 221.0 mm
without stand
771.8 mm x 489.3 mm x 39.9 mm 784.6 mm x 499.5 mm x 39.9 mm
Weight
with stand
without stand
11.8 kg
10.0 kg
12.65 kg
10.5 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
90 W
AC 100-240 V~ 50 / 60 Hz
130 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
Supported movie files
Refer to p. 54
to
55
The specifications shown above may be changed without prior notice for quality improvement.
146
APPENDIX
APPENDIX
MODELS
37LE5
***
37LE5300-ZA / 37LE530N-ZA
37LE5308-ZA
37LE5310-ZB / 37LE531N-ZB
37LE5318-ZB
Dimensions
(Width x Height x
Depth)
with stand
905.0 mm x 630.0 mm x 270.0 mm 905.0 mm x 630.0 mm x 270.0 mm
without stand
905.0 mm x 568.0 mm x 39.9 mm 905.0 mm x 568.0 mm x 39.9 mm
Weight
with stand
without stand
15.3 kg
12.8 kg
15.3 kg
12.8 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
140 W
AC 100-240 V~ 50 / 60 Hz
140 W
MODELS
42LE5
***
42LE5300-ZA / 42LE530N-ZA
42LE5308-ZA
42LE5310-ZB / 42LE531N-ZB
42LE5318-ZB
Dimensions
(Width x Height x
Depth)
with stand
1016.0 mm x 692.0 mm x 270.0 mm 1016.0 mm x 692.0 mm x 270.0 mm
without stand
1016.0 mm x 630.0 mm x 29.3 mm 1016.0 mm x 630.0 mm x 29.3 mm
Weight
with stand
without stand
19.2 kg
16.7 kg
19.2 kg
16.7 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
150 W
AC 100-240 V~ 50 / 60 Hz
150 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
Supported movie files
Refer to p. 54
to
55
The specifications shown above may be changed without prior notice for quality improvement.
147
APPENDIX
MODELS
47LE5
***
47LE5300-ZA / 47LE530N-ZA
47LE5308-ZA
47LE5310-ZB / 47LE531N-ZB
47LE5318-ZB
Dimensions
(Width x Height x
Depth)
with stand
1126.6 mm x 757.9 mm x 284.4 mm 1126.6 mm x 757.9 mm x 284.4 mm
without stand
1126.6 mm x 692.0 mm x 29.3 mm 1126.6 mm x 692.0 mm x 29.3 mm
Weight
with stand
without stand
22.9 kg
19.6 kg
22.9 kg
19.6 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
170 W
AC 100-240 V~ 50 / 60 Hz
170 W
MODELS
55LE5
***
55LE5300-ZA / 55LE530N-ZA
55LE5308-ZA
55LE5310-ZB / 55LE531N-ZB
55LE5318-ZB
Dimensions
(Width x Height x
Depth)
with stand
1306.0 mm x 867.0 mm x 345.0 mm 1306.0 mm x 867.0 mm x 345.0 mm
without stand
1306.0 mm x 797.0 mm x 30.7 mm 1306.0 mm x 797.0 mm x 30.7 mm
Weight
with stand
without stand
34.05 kg
29.35 kg
34.05 kg
29.35 kg
Power requirement
Power Consumption
AC 100-240 V~ 50 / 60 Hz
200 W
AC 100-240 V~ 50 / 60 Hz
200 W
CI Module Size
(Width x Height x Depth)
100.0 mm x 55.0 mm x 5.0 mm
Environment condition
Operating
Temperature
Operating Humidity
0 °C
to
40 °C
Less than 80 %
Storage Temperature
Storage Humidity
-20 °C
to
60 °C
Less than 85 %
Supported movie files
Refer to p. 54
to
55
The specifications shown above may be changed without prior notice for quality improvement.
Digital TV Analogue TV
Television System
DVB-T
DVB-C
PAL/SECAM B/G/D/K, PAL I/II,
SECAM L/L
Programme Coverage
VHF, UHF
VHF: E2
to E12, UHF: E21 to E69,
CATV: S1
to S20, HYPER: S21 to S47
External Antenna Impedance
75 75
The specifications shown above may be changed without prior notice for quality improvement.
148
APPENDIX
APPENDIX
IR CODES
*This feature is not available for all models.
Code (Hexa) Function Note
95 Energy Saving R/C BUTTON
08 POWER R/C BUTTON(POWER ON/OFF)
0B INPUT R/C BUTTON
79 RATIO R/C BUTTON
F0 TV/RAD R/C BUTTON
45 Q.MENU R/C BUTTON
43 MENU R/C BUTTON
AB GUIDE R/C BUTTON
40
Up ( )
R/C BUTTON
41
Down ( )
R/C BUTTON
07
Left (
)
R/C BUTTON
06
Right (
)
R/C BUTTON
44
OK( )
R/C BUTTON
28 BACK R/C BUTTON
5B EXIT R/C BUTTON
AA INFO i R/C BUTTON
30 AV MODE R/C BUTTON
02
+
R/C BUTTON
03
-
R/C BUTTON
1E FAV ( MARK ) R/C BUTTON
09 MUTE R/C BUTTON
00
P
R/C BUTTON
01
P
R/C BUTTON
10
to 19 Number Key 0 to 9
R/C BUTTON
53 LIST R/C BUTTON
1A Q.VIEW R/C BUTTON
72 RED Key R/C BUTTON
71 GREEN Key R/C BUTTON
63 YELLOW Key R/C BUTTON
61 BLUE Key R/C BUTTON
20 TEXT R/C BUTTON
21 T.OPT(T.Option) R/C BUTTON
39 SUBTITLE R/C BUTTON
7E SIMPLINK R/C BUTTON
91 AD R/C BUTTON
B1
R/C BUTTON
B0
R/C BUTTON
BA
l l
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
149
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s func-
tions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
1 5
6 9
RS-232C Configurations
7-Wire Configurations
(
Standard RS-232C cable
)
PC TV
RXD 2 3 TXD
TXD 3 2 RXD
GND 5 5 GND
DTR 4 6 DSR
DSR 6 4 DTR
RTS 7 8 CTS
CTS 8 7 RTS
D-Sub 9 D-Sub 9
3-Wire Configurations
(
Not standard
)
PC TV
RXD 2 3 TXD
TXD 3 2 RXD
GND 5 5 GND
DTR 4 6 DTR
DSR 6 4 DSR
RTS 7 7 RTS
CTS 8 8 CTS
D-Sub 9 D-Sub 9
Type of Connector; D-Sub 9-Pin Male
No. Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD
(
Receive data
)
TXD
(
Transmit data
)
DTR
(
DTE side ready
)
GND
DSR
(
DCE side ready
)
RTS
(
Ready to send
)
CTS
(
Clear to send
)
No Connection
150
APPENDIX
APPENDIX
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OK
Move
OPTION
Set ID :1
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’.
p.
154
Press the BACK button to move to the previous menu screen.
1
Close
1
Select OPTION.
2
Select Set ID.
3
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1 to
99.
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OK
Move
OPTION
Set ID :1
151
APPENDIX
Communication Parameters
Baud rate : 9600 bps
(
UART
)
Data length : 8 bits
Parity : None
Stop bit : 1 bit
Communication code : ASCII code
Use a crossed (reverse) cable.
Transmission
*
[Command 1] : First command to control the TV.
(j, k, m or x)
*
[Command 2] : Second command to control the TV.
*
[Set ID] : You can adjust the set ID to choose
desired monitor ID number in option
menu. Adjustment range is 1 to 99.
When selecting Set ID ‘0, every con-
nected set is controlled.
Set ID is indicated as decimal (1 to 99)
on menu and as Hexa decimal (0x0 to
0x63) on transmission/receiving proto-
col.
*
[DATA] : To transmit command data.
TransmitFF data to read status of com-
mand.
*
[Cr] : Carriage Return
ASCII code0x0D
*
[ ] : ASCII codespace (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The set transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates
present status data. If the data is data write mode,
it returns the data of the PC computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The set transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol
Command Reference List
Data 00: Illegal Code
* Note : During USB operations such as DivX or EMF, all
commands except Power(ka) and Key(mc) are not exe-
cuted and treated as NG.
COMMAND
1
COMMAND
2
DATA
(Hexadecimal)
01. Power k a
00
to
01
02. Aspect Ratio k c Refer to p. 152
03. Screen Mute k d Refer to p. 152
04. Volume Mute k e
00
to
01
05. Volume Control k f
00
to
64
06. Contrast k g
00
to
64
07. Brightness k h
00
to
64
08. Colour k i
00
to
64
09. Tint k j
00
to
64
10. Sharpness k k
00
to
64
11. OSD Select k l
00
to
01
12.
Remote control lock mode
k m
00
to
01
13. Treble k r
00
to
64
14.
Bass
k s
00
to
64
15. Balance k t
00
to
64
16.
Colour Temperature
x u
00
to
64
17. Energy Saving j q
00
to
05
18. Auto Configuration j u 01
19. Tune Command m a Refer to p. 154
20. Programme Add/Skip m b
00
to
1
21. Key m c Key Code
22. Control Back Light m g
00
to
64
23. Input select (Main) x
b Refer to p. 155
152
APPENDIX
APPENDIX
08. Colour (Command: k i)
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][i][ ][Set ID][ ][Data][Cr]
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
[k][e][ ][Set ID][ ][Data][Cr]
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
02. Aspect Ratio (
Command: k
c) (Main Picture Size)
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
06 : Original
07 : 14:9
09 : Just Scan
0B : Full Wide
10 to 1F : Cinema Zoom 1 to 16
[k][c][ ][Set ID][ ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
*
In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz /
60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz),
Component( 720p, 1080i, 1080p 50 Hz / 60 Hz)
mode, Just Scan is available.
* Full Wide is supported only for Digital,
Analogue
,
AV.
[c][ ][Set ID][ ][OK/NG][Data][x]
03. Screen Mute (Command: k d)
To select screen mute on/off.
Transmission
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
[k][d][ ][Set ID][ ][Data][Cr]
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the VOLUME but-
tons on remote control.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][f][ ][Set ID][ ][Data][Cr]
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][g][ ][Set ID][ ][Data][Cr]
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][h][ ][Set ID][ ][Data][Cr]
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
01. Power (Command: k a)
To control Power On/Off of the set.
Transmission
Data 00 : Power Off 01 : Power On
[k][a][ ][Set ID][ ][Data][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
* Similarly, if other functions transmit 0xFF’ data
based on this format, Acknowledgement data feed
back presents status about each function.
* OK Ack., Error Ack. and other message may dis-
play on the screen when TV is power On.
[a][ ][Set ID][ ][OK/NG][Data][x]
Ack
153
APPENDIX
12. Remote control lock mode (Command: k m)
To lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Ack
Data 00 : Lock off 01 : Lock on
* If you are not using the remote control, use this
mode.
When main power is on/off, external control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
[m][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when con-
trolling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Ack
Data 00 : OSD off 01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
Data Red : 00 to Green : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][j][ ][Set ID][ ][Data][Cr]
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
10. Sharpness (Command: k k)
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][k][ ][Set ID][ ][Data][Cr]
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
15. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][t][ ][Set ID][ ][Data][Cr]
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
14.
Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][s][ ][Set ID][ ][Data][Cr]
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[x][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
13. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][r][ ][Set ID][ ][Data][Cr]
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
154
APPENDIX
APPENDIX
19.Tune Command (Command: m a)
Select channel to following physical number.
Transmission
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 : 0x00 :
Analogue
Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
(Except For Sweden, Finland, Norway, Denmark,
Ireland)
Digital - Min: 00 to Max: 270F (0 to 9999)
(Only Sweden, Finland, Norway, Denmark, Ireland)
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 to Max: 7DH
20. Programme Add/Skip(Command: m b)
To set skip status for the current Programme.
Transmission
Data 00 : Skip 01 : Add
[m][b][ ][Set ID][ ][Data][Cr]
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
17. Energy Saving (Command: j q)
To reduce the power consumption of the TV. You can
also adjust Energy Saving in PICTURE menu.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Ack
[q][ ][Set ID][ ][OK/NG][Data][x]
18. Auto Configure(Command: j u)
To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
Data 01: To set
[j][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
Power Saving
Function
Level
Description
7 6 5 4 3 2 1 0
0 0 0 0 Low Power 0 0 0 0 Off
0 0 0 0 Low Power 0 0 0 1 Minimum
0 0 0 0 Low Power 0 0 1 0 Medium
0 0 0 0 Low Power 0 0 1 1 Maximum
0 0 0 0 Low Power 0 1 0 0
Auto
0 0 0 0 Low Power 0 1 0 1 Screen Off
*
Real data mapping 1
00 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
CF : Step 199
FE : Step 254
FF : Step 255
(Only 32/42/46/60LD5
***
, 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
)
155
APPENDIX
23
. Input select (
Command: x
b)
(Main Picture Input)
To select input source for main picture.
Transmission
Data Structure
MSB LSB
[x][b][ ][Set ID][ ][Data][Cr]
External Input Input Number
22. Control Back Light (Command: m g)
To Control the back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
Data : data Min: 00 to Max: 64
21. Key(Command: m c)
To send IR remote key code.
Transmission
Data Key code - Refer to page 148.
[m][c][ ][Set ID][ ][Data][Cr]
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
0 0 0 0 0 0 0 0
External Input Data
0 0 0 0
DTV
0 0 0 1
Analogue
0 0 1 0
AV
0 1 0 0
Component
0 1 1 0
RGB
0 1 1 1
HDMI
1 0 0 0
1 0 0 1
1 0 1 0
Input Number Data
0 0 0 0
Input1
0 0 0 1
Input2
0 0 1 0
Input3
0 0 1 1
Input4
156
APPENDIX
APPENDIX
OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL, MPL libraries used in this product are subject to the
GPL2.0/LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
Linux kernel 2.6, busybox, e2fsprogs, gdbserver, jfsutils, mtd-utils, procps, u-boot, udhcpc
LGPL LIBRARIES:
directFB, glibc, gconv
MPL LIBRARIES:
Nanox
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of media, shipping and handling upon e-mail request
to LG Electronics at: opensource@lge.com
This offer is valid for a period of three (3) years from the date of the distribution of this product by
LG Electronics.
You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this prod-
uct. Also you can obtain the translation of GPL, LGPL licenses from http://www.gnu.org/licenses/old-
licenses/gpl-2.0-translations.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.
This product includes other open source software
expat:
copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
freetype: copyright © 2003 The FreeType Project (www.freetype.org).
ICU: copyright © 1995-2008 International Business Machines Corporation and others.
libcurl: copyright © 1996 - 2008, Daniel Stenberg.
libjpeg: This software is based in part on the work of the Independent JPEG Group copyright ©
1991 1998, Thomas G. Lane.
libmng: copyright © 2000-2007 Gerard Juyn, Glenn Randers-Pehrson
libpng: copyright © 1998-2008 Glenn Randers-Pehrson
md5: copyright © 1991-2, RSA Data Security, Inc
md5 checksum : copyright © 1999, 2000, 2002 Aladdin Enterprises
ncurses: copyright © 1998 Free Software Foundation, Inc.
openSSL:
cryptographic software written by Eric Young.
software written by Tim Hudson.
software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.
openssl.org)
strace :
copyright © 1991, 1992 Paul Kranenburg.
copyright © 1993 Branko Lankester.
copyright © 1993 Ulrich Pegelow.
copyright © 1995, 1996 Michael Elizabeth Chastain.
157
APPENDIX
copyright © 1993, 1994, 1995, 1996 Rick Sladkey.
copyright © 1998-2003 Wichert Akkerman.
copyright © 2002-2008 Roland McGrath.
copyright © 2003-2008 Dmitry V. Levin.
copyright © 2007-2008 Jan Kratochvil.
tinyxml: copyright © 2000-2006 Lee Thomason
xyssl: Copyright (C) 2009 Paul Bakker
zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, includ-
ing without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is furnished to do so, sub-
ject to the following conditions:
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
158
APPENDIX
APPENDIX
OPEN SOURCE LICENSE
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to sur-
render the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no war-
ranty for this free software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program
or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that
is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is
addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
159
APPENDIX
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, pro-
vided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of
any warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copy-
right notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception:
if the Program itself is interactive but does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regard-
less of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or exe-
cutable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface defini-
tion files, plus the scripts used to control compilation and installation of the executable. However, as a special excep-
tion, the source code distributed need not include anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
160
APPENDIX
APPENDIX
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permis-
sion to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indi-
cate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to sat-
isfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it
and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the sec-
tion is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
161
APPENDIX
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve
this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain
conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
Of course, the commands you use may be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compil-
ers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Lesser General Public License instead of this License.
162
APPENDIX
APPENDIX
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in
any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you
wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code
with the library, you must provide complete object files to the recipients, so that they can relink them with the library
after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the recipients should know that what they have is not the original
version, so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license,
the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is
legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore
permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits
more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to
gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use
a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
163
APPENDIX
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver-
sion of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the differ-
ence between a "work based on the library" and a "work that uses the library". The former contains code derived from
the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with applica-
tion programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A
"work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medi-
um, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and dis-
claimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distrib-
ute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of
any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates,
and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regard-
less of who wrote it.
164
APPENDIX
APPENDIX
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or execut-
able form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place satisfies the requirement to distribute the source code, even
though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore cov-
ered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it
is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modi-
fications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its
use are covered by this License. You must supply a copy of this License. If the work during execution displays copy-
right notices, you must include the copyright notice for the Library among them, as well as a reference directing the
user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user's computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as
long as the modified version is interface-compatible with the version that the work was made with.
165
APPENDIX
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normal-
ly accompany the operating system. Such a contradiction means you cannot use both them and the Library together in
an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that
you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automati-
cally terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permis-
sion to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or
works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and condi-
tions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to sat-
isfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the sec-
tion is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical dis-
tribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
166
APPENDIX
APPENDIX
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new prob-
lems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer
to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any
later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by
James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
167
APPENDIX
MOZILLA PUBLIC LICENSE
Version 1.1
---------------
1. Definitions.
1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party.
1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.
1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor,
and the Modifications made by that particular Contributor.
1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and
Modifications, in each case including portions thereof.
1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development com-
munity for the electronic transfer of data.
1.5. "Executable" means Covered Code in any form other than Source Code.
1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice
required by Exhibit A.
1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the
terms of this License.
1.8. "License" means this document.
1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the ini-
tial grant or subsequently acquired, any and all of the rights conveyed herein.
1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or
any previous Modifications. When Covered Code is released as a series of files, a Modification is:
A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
B. Any new file that contains any part of the Original Code or previous Modifications.
1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice
required by Exhibit A as Original Code, and which, at the time of its release under this License is not already
Covered Code governed by this License.
1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation,
method, process, and apparatus claims, in any patent Licensable by grantor.
1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all
modules it contains, plus any associated interface definition files, scripts used to control compilation and installation
of an Executable, or source code differential comparisons against either the Original Code or another well known,
available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form,
provided the appropriate decompression or de-archiving software is widely available for no charge.
1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License or a future version of this License issued under Section 6.1.
For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You.
For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or manage-
ment of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the out-
standing shares or beneficial ownership of such entity.
2. Source Code License.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intel-
lectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
168
APPENDIX
APPENDIX
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes
Original Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the
Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the
Original Code or ii) the combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free,
non-exclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, repro-
duce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or por-
tions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a
Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor
either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use,
sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions
thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or por-
tions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes
Commercial Use of the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has delet-
ed from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i)
third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor
with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims
infringed by Covered Code in the absence of Modifications made by that Contributor.
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of
this License or a future version of this License released under Section 6.1, and You must include a copy of this
License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source
Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder.
However, You may include an additional document offering the additional rights described in Section 3.5.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under
the terms of this License either on the same media as an Executable version or via an accepted Electronic
Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via
Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially
became available, or at least six (6) months after a subsequent version of that particular Modification has been
made available to such recipients. You are responsible for ensuring that the Source Code version remains available
even if the
Electronic Distribution Mechanism is maintained by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to
create that Covered Code and the date of any change. You must include a prominent statement that the Modification
is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the
Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in
which You describe the origin or ownership of the Covered Code.
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise
the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the
Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient
detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is
made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies
Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or
newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has
been obtained.
169
APPENDIX
(b) Contributor APIs.
If Contributor's Modifications include an application programming interface and Contributor has knowledge of
patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor-
mation in the LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that
Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant
the rights conveyed by this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant
directory) where a user would be likely to look for such a notice. If You created one or more Modification(s)
You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License
in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to
Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations
to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of
the Initial
Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liabil-
ity obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor
for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or lia-
bility terms You offer.
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for
that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is avail-
able under the terms of this License, including a description of how and where You have fulfilled the obligations of
Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documenta-
tion or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the
Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms
different from this License, provided that You are in compliance with the terms of this License and that the license
for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from
the rights set forth in this
License. If You distribute the Executable version under a different license You must make it absolutely clear that any
terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial
Developer or such Contributor as a result of any such terms You offer.
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements
of this License are fulfilled for the Covered Code.
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the max-
imum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in
the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to
the
extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary
skill to be able to understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related
Covered Code.
6. Versions of the License.
6.1. New Versions.
Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from
time to time. Each version will be given a distinguishing version number.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use
it under the terms of that version. You may also choose to use such Covered Code under the terms of any subse-
quent version of the License published by Netscape. No one other than Netscape has the right to modify the terms
applicable to Covered Code created under this License.
170
APPENDIX
APPENDIX
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is
not already Covered Code governed by this License), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in
your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your ver-
sion of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling
in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of
themselves be deemed to be modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE
COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-
INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH
YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL
DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR
OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE.
NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms here-
in and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered
Code which are properly granted shall survive any termination of this License. Provisions which, by their nature,
must remain in effect beyond the termination of this License shall survive.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against
Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred
to as "Participant") alleging that:
(a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted
by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant
terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay
Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such
Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If
within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by
the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or
2.2 automatically terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are
revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that
Participant.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the
initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant
under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.
8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distrib-
utors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall
survive termination.
9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING
NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER
CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES,
BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF
ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR
LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.
THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH
LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
10. U.S. GOVERNMENT END USERS.
The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48
C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June
1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License
is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, direct-
ly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to
constitute any admission of liability.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means
that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alter-
native licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this
file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND,
either express or implied. See the License for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________. All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in
which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your
version of this file only under the terms of the [____] License and not to allow others to use your version of this file
under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other
provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of
this file under either the MPL or the [___] License."
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the
Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for
Your Modifications.]
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
Model :
Serial No. :
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
103

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LG 42LD559 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LG 42LD559 in de taal/talen: Engels als bijlage per email.

De handleiding is 23,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van LG 42LD559

LG 42LD559 Gebruiksaanwijzing - Nederlands - 206 pagina's

LG 42LD559 Gebruiksaanwijzing - Deutsch - 206 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info