452515
13
Verklein
Vergroot
Pagina terug
1/220
Pagina verder
www.lg.com
OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or regis-
tered trademarks of HDMI Licensing LLC.
Wall Mounting Bracket
Separate purchase
(19/22/26/32LD3
***
,
32LD4
***
, 32LD5
***
,
19/22/26/32LE3
***
,
32LE4
***
, 22/26LE5
***
,
32LE5
***
)
LSW100B or
LSW100BG
(37/42/47LD4
***
,
42/46LD5
***
,
37/42LE4
***
,
37/42/47LE5
***
)
LSW200B or
LSW200BG
(52/60LD5
***
,
55LE5
***
)
LSW400B or
LSW400BG
Wireless Media Box
(32/42/46/52/60LD5
***
,
32/37/42LE4
***
,
32/37/42/47/55LE5
***
)
I
CONTENTS
CONTENTS
PREPARATION
LCD TV Models : 19/22/26/32LD3
***..............A-1
LCD TV Models : 32/37/42/47LD4
***............A-14
LCD TV Models : 32/42/46/52/60LD5
***
......A-24
LED LCD TV Models : 19/22/26/32LE3
***
, 32/37/
42LE4
***
, 22/26LE5
***,
32/37/42/47/55LE5
***
...... A-33
EXTERNAL EQUIPMENT SETUP
Antenna Connection ............................................1
Connecting with a Component cable
..................2
Connecting with an HDMI cable
.........................3
Connecting with an HDMI to DVI cable
..............4
Connecting with a Euro Scart cable
...................5
Usb setup
............................................................6
Connecting with a RF Cable
...............................6
Connecting with a RCA cable
.............................7
Connecting with a D-sub 15 pin cable
................8
Insertion of CI Module
.........................................9
Headphone Setup
...............................................9
Digital audio out Setup
......................................10
External Equipment WIreless Connection
........11
Supported Display Resolution
...........................12
Screen Setup for PC mode
...............................13
WATCHING TV / PROGRAMME CON-
TROL
Turning on the TV .............................................17
Initializing Setup
...............................................17
Programme Selection
........................................17
Volume Adjustment
...........................................17
Quick Menu
.......................................................18
On Screen Menus Selection and adjustment
...19
Auto programme tuning
...................................20
Cable DTV setting
.............................................25
Manual programme Tuning
...............................26
Programme Edit
...............................................30
CI [Common Interface] Information
...................34
Software Update
...............................................35
Picture/Sound test
.............................................37
Diagnostics
........................................................38
Product/service information...............................39
Simple Manual
..................................................40
Selecting the Programme List
...........................41
Input List
............................................................43
Input Label
........................................................44
Data Service
......................................................45
SIMPLINK
..........................................................46
AV Mode
............................................................50
Initializing(Reset to original factory settings)
....51
TO USE A USB DEVICE
When connecting a USB device .......................52
Movie list
..........................................................54
Photo list
............................................................65
Music list
............................................................75
DivX Registration Code
....................................84
Deactivation
.....................................................85
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch on/off EPG .............................................87
Select a programme
..........................................87
Button Function in NOW/NEXT Guide Mode
...87
Button Function in 8 Day Guide Mode
.............88
Button Function in Date Change Mode
............89
Button Function in Extended Description Box
..89
Button Function in Record/Remind Setting Mode 90
Button Function in Schedule List Mode ............91
II
CONTENTS
CONTENTS
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................92
Picture Wizard
...................................................94
Energy Saving
...................................................95
Preset Picture Settings
.....................................96
Manual Picture Adjustment
...............................97
Picture Improvement Technology
......................98
Expert Picture Control
.......................................99
Picture Reset
...................................................102
Trumotion
........................................................103
Power Indicator
..............................................104
Mode Setting
...................................................105
Demo Mode
.....................................................106
SOUND & LANGUAGE CONTROL
Auto Volume Leveler .......................................107
Clear Voice II
...................................................108
Preset Sound Settings-Sound Mode
..............109
Sound Setting Adjustment -User Mode
..........110
Infinite Sound
..................................................110
Balance
........................................................... 111
TV Speakers On/ Off Setup
............................112
DTV Audio Setting (in digital mode only)
........113
Selecting Digital Audio out
..............................114
Audio Reset
.....................................................115
Audio Description (In digital mode only)
.........116
I/II
-
Stereo/Dual Reception (In Analogue Mode Only) 117
- NICAM Reception (In Analogue Mode Only) 118
- Speaker Sound Output Selection ................118
On-Screen Menu Language / Country Selection 119
Language Selection ........................................120
TIME SETTING
Clock Setup .....................................................122
Auto on/off time setting
...................................123
Sleep Timer setting
.........................................124
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................125
Block Programme
............................................126
Parental Control (In Digital Mode only)
...........127
External Input Blocking
...................................128
Key Lock..........................................................129
TELETEXT
Switch on/off ...................................................130
SIMPLE Text....................................................130
TOP Text..........................................................131
FASTEXT
........................................................131
Special Teletext Functions
..............................132
DIGITAL TELETEXT
Teletext within Digital Service .........................133
Teletext in Digital Service
................................133
APPENDIX
Troubleshooting ...............................................134
Maintenance
....................................................136
Product Specifications
.....................................137
IR Codes
.........................................................148
External Control Device Setup
........................149
Open source software notice
..........................156
A-1
PREPARATION
PREPARATION
ACCESSORIES
LCD TV MODELS : 19/22/26/32LD3
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual Batteries
(AAA)
Remote Control
Power Cord
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polish-
ing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
Ferrite Core
(
This item is not included
for all models.
)
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
Protection Cover
Only 19/22LD3
***
Cable Holder
1-screw for stand fixing
Bolts for stand assembly
Protection Cover
Only 26/32LD3
***
(M4x20)
x 8
A-2
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
Image shown may differ from your TV.
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
VOLUME
PROGRAMME
OK
MENU
INPUT
POWER
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
Remote Control Sensor
SPEAKER
Only 26/32LD3
***
PROGRAMME
VOLUME
MENUPOWER
OKINPUT
Only 19/22LD3
***
A-3
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
4 6 7
5
9 10
8
11
12
13
Only 19/22LD3
***
A-4
PREPARATION
PREPARATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4 5 6
8 9
7
Only 26LD3
***
10
11
2
12
13
13
A-5
PREPARATION
Only 32LD3
***
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB IN Input
Connect the output from a PC.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
13
2
3 4 5 6
7 98
10
11
2
12
13
1
A-6
PREPARATION
PREPARATION
STAND INSTALLATION
Only 19/22LD3
***
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
Only 26/32LD3
***
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
1
3
4
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
2
A-7
PREPARATION
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover.
NOT USING THE DESK-TYPE STAND
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Only 19/22LD3
***
Loose the bolts from TV.
2
Detach the stand from TV.
3
Insert the Protection Cover into the TV.
After removing the protection paper from
the protection cover, adhere it to the TV as
shown.
4
Protection Cover
Insert the Protection Cover into the TV until
clicking sound.
Only 26/32LD3
***
Protection Cover
A-8
PREPARATION
PREPARATION
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section.
1
Open the Cable Management Clip as
shown.
2
Fit the Cable Management Clip as shown.
3
Only 26/32LD3
***
Cable Management Clip
BACK COVER FOR WIRE ARRANGEMENT
Image shown may differ from your TV.
NOTE
Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Only 19/22LD3
***
After connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
Cable Holder
A-9
PREPARATION
SWIVEL STAND
(Except for 19/22LD3
***
)
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
POSITIONING YOUR DISPLAY
(Only 19/22LD3
***
)
Image shown may differ from your TV.
Adjust the position of the panel in various ways
for maximum comfort.
• Tilt range
ATTACHING THE TV TO A
DESK
(Only 26/32LD3
***
)
Desk
Stand
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw ( provided as parts of the product)
A-10
PREPARATION
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
2
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
NOTE
The Kensington Security System is an optional
accessory.
If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distor-
tion effects on the screen.
A-11
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a
wall.
We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
DESKTOP PEDESTAL
INSTALLATION
Model
VESA
(A
*
B)
Standard
Screw
Quantity
19/22LD3
***
26/32LD3
***
100
*
100
200
*
100
M4
M4
4
4
10 cm
10 cm
10 cm
10 cm
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
A-12
PREPARATION
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide.
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
1
A-13
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List).
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
A-14
PREPARATION
PREPARATION
ACCESSORIES
LCD TV MODELS : 32/37/42/47LD4
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual
Batteries
(AAA)
Remote Control
Power Cord
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polish-
ing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
Ferrite Core
(
This item is not included
for all models.
)
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
Bolts for stand assembly
1-screw for stand fixing
(Only 32/37/42LD4
***
)
x 8
(M4x20)
(Only 32/37/
42/47LD45
**
)
Protection
Cover
x 4
(M4x20)
(Only 32/37/
42/47LD42
**
)
or
A-15
PREPARATION
FRONT PANEL CONTROLS
Image shown may differ from your TV.
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
SPEAKER
Only 32/37/42/47LD45
**
A-16
PREPARATION
PREPARATION
Only 32/37/42/47LD42
**
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is
switched on.
SPEAKER
A-17
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB IN Input
Connect the output from a PC.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
2
3 4 5 6
7 98
10
11
2
12
13
A-18
PREPARATION
PREPARATION
STAND INSTALLATION
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
3
4
Assemble the parts of the Stand Body with
the Cover Base of the TV.
2
Stand Body
Cover Base
Only 32/37/42/47LD45
**
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
2
3
Only 32/37/42/47LD42
**
A-19
PREPARATION
BACK COVER FOR
WIRE ARRANGEMENT
Image shown may differ from your TV.
NOTE
Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Connect the cables as
necessary.
To connect additional
equipment, see the
EXTERNAL EQUIPMENT
SETUP section.
1
Open the Cable Management Clip as
shown.
2
Cable Management Clip
Fit the Cable Management Clip as shown.
3
Image shown may differ from your TV.
When installing the wall-mounted unit,
use the protection cover.
NOT USING THE
DESK-TYPE STAND
Insert the Protection
Cover into the TV until
clicking sound.
Protection Cover
ATTACHING THE TV TO A
DESK
(Only 32/37/42LD4
***
)
Desk
Stand
Image shown may differ from your TV.
The TV must be attached to desk so it cannot
be pulled in a forward/backward direction,
potentially causing injury or damaging the
product. Use only an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw
( provided as parts of the product)
A-20
PREPARATION
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on
the wall. Match the height of the bracket
that is mounted on the wall.
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the
TV.
To use the TV safely make sure that the
height of the bracket on the wall and on the
TV is the same.
NOTE
The Kensington Security System is an
optional accessory.
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some temporary
distortion effects on the screen.
2
10 cm
A-21
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power Supply
Circuit breaker
EARTHING
Ensure that you connect the earth wire to
prevent possible electric shock. If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to
telephone wires, lightening rods or gas pipes.
DESKTOP PEDESTAL
INSTALLATION
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a
wall.
We recommend that you purchase a wall
mounting bracket which supports VESA stan-
dard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
Model
VESA
(A
*
B)
Standard
Screw
Quantity
32LD4
***
37/42/47LD4
***
200
*
100
200
*
200
M4
M6
4
4
10 cm
10 cm
10 cm
10 cm
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
The surface that wall mount is to be mounted
on should be of sufficient strength to support
the weight of TV set; e.g. concrete, natural
rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information, refer
to the instructions included with the mount.
LG is not liable for any accidents or damage to
property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is
used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
Image shown may differ from your TV.
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
10 cm
A-22
PREPARATION
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide.
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
1
A-23
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List).
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
A-24
PREPARATION
PREPARATION
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
ACCESSORIES
LCD TV MODELS : 32/42/46/52/60LD5
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual
Ferrite Core
(
This item is not included
for all models.
)
Power Cord
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any
stains or fingerprints
on the surface of the
TV with the polishing
cloth.
Do not use exces-
sive force. This may
cause scratching or
discolouration.
1-screw for stand fixing
(Only 32/42LD5
***
)
Protection
Cover
Bolts for stand assembly
x 8
M4 x 20
Batteries
(AAA)
Remote Control
A-25
PREPARATION
FRONT PANEL CONTROLS
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Image shown may differ from your TV.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is
switched on.
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
SPEAKER
A-26
PREPARATION
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
WIRELESS Control
Connect the Wireless Media Box to the
WIRELESS CONTROL jack on the TV.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
2
3
64 5 7
98
11
2
12
13
14
10
A-27
PREPARATION
STAND INSTALLATION
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
Image shown may differ from your TV.
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened
fully, the product can tilt forward after the product
installation.) If you tighten the bolt with excessive
force, the bolt can deviate from abrasion of the
tightening part of the bolt.
BACK COVER FOR
WIRE ARRANGEMENT
Image shown may differ from your TV.
1
3
4
NOTE
Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section.
1
Open the Cable Management Clip as
shown.
2
Cable Management Clip
Fit the Cable Management Clip as shown.
3
Assemble the parts of the Stand Body with
the Cover Base of the TV.
2
Stand Body
Cover Base
A-28
PREPARATION
PREPARATION
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the Protection Cover into the TV until
clicking sound.
NOT USING THE
DESK-TYPE STAND
ATTACHING THE TV TO A
DESK
(Only 32/42LD5
***
)
Desk
Stand
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw
( provided as parts of the product)
Protection Cover
A-29
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
3
Use the eye-bolts or TV brackets/bolts to fix
the product to the wall as shown in the pic-
ture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
1
2
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the
TV.
To use the TV safely make sure that the
height of the bracket on the wall and on the
TV is the same.
NOTE
The Kensington Security System is an
optional accessory.
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some tempo-
rary distortion effects on the screen.
2
A-30
PREPARATION
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a
wall.
We recommend that you purchase a wall
mounting bracket which supports VESA stan-
dard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
DESKTOP PEDESTAL
INSTALLATION
10 cm
10 cm
10 cm
10 cm
Model
VESA
(A
*
B)
Standard
Screw
Quantity
32LD5
***
42LD5
***
46LD5
***
52LD5
***
60LD5
***
200
*
100
200
*
200
200
*
200
400
*
400
400
*
400
M4
M6
M6
M6
M6
4
4
4
4
4
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
A-31
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
1
A-32
PREPARATION
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List).
AD
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
Switches the Audio Description On or Off.
A-33
PREPARATION
ACCESSORIES
LED LCD TV MODELS : 19/22/26/32LE3
***
, 32/37/42LE4
***
,
22/26LE5
***
, 32/37/42/47/55LE5
***
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual Batteries
(AAA)
Remote Control
Ferrite Core
(
This item is not included
for all models.
)
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any
stains or fingerprints on
the surface of the TV
with the polishing cloth.
Do not use excessive
force. This may cause
scratching or discolou-
ration.
Power Cord
Only 19/22/26LE3
***
,
22/26LE5
***
Cable Holder
DC Adapter 4-Ring spacers
(Only 26LE3
***
,
26LE5
***
)
Bolts for stand assembly
(M4x14)
x 4
(M4x20)
(Only 26LE3
***
,
26LE5
***
)
x 4
Use of ferrite core (This feature is
not available for all models.)
Ferrite core can be used to reduce the elec-
tromagnetic wave when connecting the
power cord.
The closer the location of the ferrite core to
the power plug, the better it is.
Install the power plug closely.
Only 32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
Cable Holder
Bolts for stand assembly
(M4x26)
(Only
47/55LE5
***
)
x 4
(M4x16)
x 4
Component gender cable,
AV gender cable
x 2
1-screw for stand
fixing
(Only 32LE3
***
,
32LE4
***
, 32LE5
***
)
(M4x22)
(Only
32LE3
***
,
32LE4
***
,
32LE5
***
)
x 4
(M4x24)
(Only
37/42LE4
***
,
37/42LE5
***
)
x 4
or
A-34
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Image shown may differ from your TV.
SPEAKER
OK
PROGRAMME
INPUT
VOLUME MENU POWER
Only 19/22/26LE3
***
, 22/26LE5
***
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
Touch Sensor
You can use the desired button
function by touching.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Only 32/37/42LE4
***
VOLUME MENU POWER
OK
PROGRAMME
INPUT
Power/Standby Indicator
Note: You can turn the Power Indicator on
or off in the OPTION menu.
Only 32LE3
***
, 32/37/42/47/55LE5
***
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Only 32/37/42LE4
***
, 32/37/42/47/55LE5
***
A-35
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
DC ADAPTER PORT
Connect to the power cord socket.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3 5 6
4
8 9 10
7
11
12
13
Only 19/22LE3
***
, 22LE5
***
A-36
PREPARATION
PREPARATION
Only 26LE3
***
, 26LE5
***
Image shown may differ from your TV.
DC ADAPTER PORT
Connect to the power cord socket.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3 5 6
4
8 9 10
7
ANTENNA
IN
L/MONO
R
AUDIO
VIDEO
AV IN 2
DC IN
2
1
HDMI/DVI IN
(RGB)
USB IN
HDMI
IN 3
H/P
11
12
13
7
A-37
PREPARATION
Only 32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
Image shown may differ from your TV.
2
3
4 5
7 8 11
9 10
1
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(p.137 to 147) Never attempt to operate
the TV on DC power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
WIRELESS CONTROL
Connect the Wireless Media Box to the
WIRELESS CONTROL jack on the TV.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
CAUTION
Use a product with the following
thickness for optimal connection to
HDMI cable (Only HDMI IN 4) /
USB device.
*A 10 mm
6
12
13
14
2
10
A-38
PREPARATION
PREPARATION
Only 26/32LE3
***
, 32/42/47LE4
***
,
26LE5
***
, 32/37/42/47/55LE5
***
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
3
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand
Body
Stand
Base
STAND INSTALLATION
Only 19/22LE3
***
, 22LE5
***
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
3
4
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
M4 X 14
Assemble the parts of the Stand Rear
Cover with the TV.
4
Stand Rear
Cover
Fix the 4 bolts securely using the holes in
the back of the TV.
5
M4 X 14
(Only 26LE3
***
,
26LE5
***
)
M4 X 16
(Only 32LE3
***
,
32/37/42LE4
***
,
32/37/42/47/55LE5
***
)
M4 X 22(Only 32LE3
***
,
32LE4
***
, 32LE5
***
)
M4 X 24(Only 37/42LE4
***
,
37/42LE5
***
)
M4 X 26 (Only 47/55LE5
***
)
M4 X 20
(Only 26LE3
***
,
26LE5
***
)
A-39
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Image shown may differ from your TV.
After connecting the cables as necessary,
install Cable Holder as shown and bundle the
cables.
Cable Holder
Only 19/22/26LE3
***
,
22/26LE5
***
1
After connecting the cables as necessary,
install Cable Holder as shown and bundle
the cables.
Secure the power cord with the Cable
Holder on the TV back cover.
It will help prevent the power cable from
being removed by accident.
2
Cable Holder
Cable Holder
Only 32LE3
***
, 32/37/42LE4
***
,
32/37/42/47/55LE5
***
A-40
PREPARATION
PREPARATION
ATTACHING THE TV TO A
DESK
(Only 32LE3
***
, 32LE4
***
, 32LE5
***
)
Desk
Stand
Ima4e shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the machine may cause injury.
1-Screw
( provided as parts of the product)
DESKTOP PEDESTAL
INSTALLATION
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
SWIVEL STAND
(Only 26/32LE3
***,
32/37/42LE4
***,
26LE5
***,
32/37/42/47/55LE5
***
)
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
CONNECTION OF TV
(Only 19/22/26LE3
***,
22/26LE5
***
)
Image shown may differ from your TV.
1
2
3
Connect the antenna cable to the antenna
input port on the TV.
Connect the DC adapter plug to the power
input jack on the TV.
Connect the power cord to the DC adapter
first, then plug the power cord into the wall
power outlet.
CAUTION
Please be sure to connect the TV to the DC
power adapter before connecting the TV's power
plug to a wall power outlet.
DC Adapter
A-41
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
2
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix
the product to the wall as shown in the pic-
ture.
(If your TV has bolts in the eyebolts, loosen
then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on
the wall. Match the height of the bracket
that is mounted on the wall.
Use a sturdy rope to tie the product for
alignment. It is safer to tie the rope so it
becomes horizontal between the wall and
the product.
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the
TV.
To use the TV safely make sure that the
height of the bracket on the wall and on the
TV is the same.
NOTE
The Kensington Security System is an
optional accessory.
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some temporary
distortion effects on the screen.
2
A-42
PREPARATION
PREPARATION
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
Place the ring spacers on the set before
installing the wall mounting bracket so that
the inclination of the backside of the set can
be adjusted perpendicularly.
< Only 26LE3
***,
26LE5
***
>
4-Ring spacers
Image shown may differ from your TV.
Model
VESA
(A
*
B)
Standard
Screw
Quantity
19/22/26LE3
***
32LE3
***
32LE4
***
37/42LE4
***
22/26LE5
***
32LE5
***
37/42/47LE5
***
55LE5
***
100
*
100
200
*
100
200
*
100
200
*
200
100
*
100
200
*
100
200
*
200
400
*
400
M4
M4
M4
M6
M4
M4
M6
M6
4
4
4
4
4
4
4
4
A-43
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
Image shown may differ from your TV.
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(
p.95)
It helps you select and set images and sounds
when connecting AV devices.(
p.50)
External input mode rotate in regular sequence.
(
p.43)
Selects Radio, TV and DTV channel.
0 to 9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
(
p.41)
Returns to the previously viewed programme.
Coloured
buttons
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
TELETEXT
BUTTONS
SUBTITLE
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
1
MENU
GUIDE
Q. MENU
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.19)
Shows programme guide.
(
p.86)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).(
p.18)
Allows the user to move return one step in an inter-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
Accepts your selection or displays the current
mode.
1
1
A-44
PREPARATION
PREPARATION
VOLUME UP
/DOWN
FAV
MARK
RATIO
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture.
(
p.92)
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the
next one.
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
SIMPLINK /
MY MEDIA Menu
control buttons
Controls SIMPLINK or MY MEDIA menu(Photo List
and Music List or Movie List).
AD
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(
p.46)
Switches the Audio Description On or Off.
2
2
2
1
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
(VHF, UHF)
Wall
Antenna
Socket
RF Coaxial Wire (75
)
Antenna
UHF
Signal
Amplifier
VHF
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
2
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A COMPONENT CABLE
To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47LD4
***
models.
Image shown may differ from your TV.
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as
shown below.
HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p
O
(50 Hz / 60 Hz only)
O
(24 Hz / 30 Hz /
50 Hz / 60 Hz)
Component ports on the TV Y PB PR
Video output ports
on DVD player
Y P
B PR
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
1
Connect the video outputs
(
Y, PB, PR
)
of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
2
Connect the audio output of the external equip-
ment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
3
Turn on the external equipment.
(
Refer to the external equipment's manual for
operating instructions.)
4
Select the Component input source using the
INPUT button on the remote control.
1
2
1
2
or
3
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI CABLE
CONNECTING WITH A COMPONENT CABLE
NOTE
The TV can receive video and audio signals simultaneously when
using an HDMI cable.
If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
Check that your HDMI cable is High Speed HDMI Cable. If the HDMI
cables are not High Speed HDMI Cable, flickering or no screen dis-
play can result. Please use the High Speed HDMI Cable.
1
Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to HDMI/DVI IN 1, HDMI IN 2 (Except for
19/22LD3
***
), HDMI IN 3 (Except for 19/22/26/32LD3
***
,
32/37/42/47LD4
***
, 19/22LE3
***
, 22LE5
***
) or HDMI IN 4 (Only
32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
) jack on the
TV.
2
Turn on the external equipment.
(
Refer to the external equipment's manual for operating instruc-
tions.)
3
Select HDMI1, HDMI2 (Except for 19/22LD3
***
), HDMI3
(Except for 19/22/26/32LD3
***
, 32/37/42/47LD4
***
,
19/22LE3
***
, 22LE5
***
) or HDMI4 (Only 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
) input source using the
INPUT button on the remote control.
1
4
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI TO DVI CABLE
1
Connect the digital set-top box or the DVI out-
put of the PC to HDMI/DVI IN 1 jack on the
TV.
2
Connect the audio output of the digital set-top
box or the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the digital set-top box or the PC and
the TV.
(
Refer to the digital set-top box or the PC
manual for operating instructions.)
4
Select HDMI1 input source using the INPUT
button on the remote control.
1 2
or
5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A EURO SCART CABLE
Scart
Input Output
Video Audio RGB Video, Audio
AV1
O O O
Analogue TV, Digital TV
Output Type
Current
input mode
l
AV1
(TV Out)
AV1
(When DTV scheduled recording is in
progress using recording equipment.)
Digital TV Digital TV
O
Analogue TV, AV Analogue TV
O
(The input mode is converted
to DTV.)
Component/RGB Analogue TV
HDMI Analogue TV
NOTE
Any Euro scart cable used must be signal shielded.
TV Out : Outputs Analogue TV
or Digital TV signals.
1
Connect the Euro scart socket of the external
equipment (DVD, VCR, etc.) to the AV1 Euro
scart socket on the TV.
2
Turn on the external equipment.
(Refer to the external equipment's manual for
operating instructions.)
3
Select AV1 input source using the INPUT but-
ton on the remote control.
1
6
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
USB SETUP
1
Connect the USB device to the USB IN jack
on the TV.
2
After connecting the USB IN jack, you use the
USB function. (
p.52)
CONNECTING WITH A RF CABLE
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
1
Connect the ANT OUT socket of the VCR to
the ANTENNA IN socket on the TV.
2
Connect the antenna cable to the ANT IN
socket of the VCR.
3
Press the PLAY button on the VCR and match
the appropriate channel between the TV and
VCR for viewing.
Wall Jack
Antenna
1
2
1
or
7
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A RCA CABLE
NOTE
If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the
TV.
1
Connect the AUDIO/VIDEO jacks between TV
and VCR or external equipment. Match the
jack colours (Video = yellow, Audio Left =
white, and Audio Right = red)
2
Insert a video tape into the VCR and press
PLAY on the VCR.
(
Refer to the VCR owner’s
manual.
)
Or, Operate the corresponding external equip-
ment.
(Refer to external equipment operating guide.)
3
Select AV2 input source using the INPUT but-
ton on the remote control.
If connected to AV IN 3, select AV3 input
source.
1
Camcorder
Video Game Set
or
1
Camcorder
Video Game Set
or
or
8
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's set-
tings.
1
Connect the RGB output of the PC to the RGB
IN (PC) jack on the TV.
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the PC and the TV
4
Select RGB input source using the INPUT but-
ton on the remote control.
2
1
9
EXTERNAL EQUIPMENT SETUP
HEADPHONE SETUP
You can listen the sound through the headphone.
NOTE
AUDIO menu items are disabled when connecting a headphone.
When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
Optical Digital Audio Out is not available when connecting a headphone.
Headphone impedance: 16
Max audio output of headphone: 10 mW to 15 mW
1
Plug the headphone into the headphone socket.
2
To adjust the headphone volume, press the
+ or - button. If you press the MUTE button,
the sound from the headphone is switched off.
INSERTION OF CI MODULE
To view the encrypted (pay) services in digital TV mode.
This feature is not available in all countries.
NOTE
Check if the CI module is inserted into the PCMCIA card slot
in the right direction. If the module is not inserted properly,
this can cause damage to the TV and the PCMCIA card slot.
1
Insert the CI Module to PCMCIA (Personal
Computer Memory Card International
Association) CARD SLOT of TV as shown.
For further information, see p.34.
AV IN 2
L/MONO
R
AUDIO
VIDEO
HDMI IN 2 USB IN
H/P
ANTENNA IN
HDMI / DVI IN
1
(RGB)
Check this point as
shown and insert the CI
Module.
10
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL
DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
CAUTION
Do not look into the optical output port. Looking at the laser
beam may damage your vision.
1
Connect one end of an optical cable to the TV
Digital Audio
(
Optical
)
Output port.
2
Connect the other end of the optical cable to
the digital audio
(
Optical
)
input on the audio
equipment.
3
Set the “TV Speaker option - Off ” in the
AUDIO menu.(
p.112). Refer to the external
audio equipment instruction manual for opera-
tion.
1
2
11
EXTERNAL EQUIPMENT SETUP
1
Connect the Wireless Media Box to the
WIRELESS CONTROL jack and HDMI/DVI IN
1, HDMI IN 2 (Except for 19/22LD3
***
), HDMI
IN 3 (Except for 19/22/26/32LD3
***
,
32/37/42/47LD4
***
, 19/22LE3
***
, 22LE5
***
) or
HDMI IN 4 (Only 32LE3
***
, 32/37/42LE4
***
,
32/37/42/47/55LE5
***
) jack on the TV.
EXTERNAL EQUIPMENT WIRELESS CONNECTION
(Only 32/42/46/52/60LD5
***
, 32LE3
***
, 32/37/42LE4
***
, 32/37/42/47/55LE5
***
)
You can connect between TV and external equipment wirelessly.
For further information, refer to the “LG Wireless Media Box manual for operating instructions.
LG Wireless Media Box
12
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
RGB-PC, HDMI/DVI-PC mode
HDMI/DVI-DTV mode
SUPPORTED DISPLAY RESOLUTION
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400 31.468 70.08
640x480 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.78 59.87
1360x768 47.72 59.80
1280x1024 63.981 60.02
1920x1080
(RGB-PC)
66.587 59.93
1920x1080
(HDMI-PC)
66.587 59.93
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x480
31.469
31.5
59.94
60
720x576 31.25 50
1280x720
37.5
44.96/45
50
59.94/60
1920x1080
33.72/33.75
28.125
26.97/27
33.716/33.75
56.25
67.43/67.5
59.94/60
50
23.97/24
29.976/30.00
50
59.94/60
NOTE
Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.
There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
We recommend using 1920x1080, 60 Hz(Except
for 19/22/26LD3
***
, 32LD34**, 19/22/26LE3
***
),
1360x768, 60 Hz(Only 19/22/26LD3
***
, 32LD34**,
19/22/26LE3
***
) for the PC mode, this should pro-
vide the best picture quality.
Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included with
the TV).
If using a sound card, adjust PC sound as required.
If the graphic card on the PC does not output ana-
logue and digital RGB simultaneously, connect only
one of either RGB or HDMI IN (or HDMI/DVI IN) to
display the PC output on the TV.
If the graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)
DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
(Except for 19/22/26LD3
***
, 32LD34
**
, 19/22/26LE3
***
)
13
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Screen Reset
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Screen.
3
Select Reset.
4
Select Yes.
5
Run Reset.
To Set
Auto Config.
SCREEN
Move
Prev.
Resolution
Position
Size
Phase
Reset
Yes No
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
14
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
If the position of the image is still not correct,
try Auto adjustment again.
If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
1
Select PICTURE.
2
Select Screen.
3
Select Auto Config..
4
Select Yes.
5
Run Auto Config..
Auto Config.
Auto Config.
SCREEN
Move
Prev.
Resolution
Position
Size
Phase
Reset
Yes No
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
15
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
Selecting Resolution
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Screen.
3
Select Resolution.
4
Select the desired resolution.
5
Auto Config.
SCREEN
Move
Prev.
Resolution
Position
Size
Phase
Reset
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
1024 x 768
1280 x 768
1360 x 768
16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust
the picture position manually.
This function works in the following mode : RGB[PC].
Adjustment for screen Position, Size, Phase
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select PICTURE.
2
Select Screen.
3
Select Position, Size or Phase.
4
Make appropriate adjustments.
5
OK
Move
PICTURE
Sharpness 70
• Colour 60
• Tint 0
• Colour Temp. 0
• Advanced Control
• Picture Reset
• TruMotion
• Screen
R G
W
C
• Screen
Auto Config.
SCREEN
Resolution
Position
Size
Phase
Reset
Move
Prev.
17
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
INITIALIZING SETUP
When your TV is turned on, you will be able to use its features.
VOLUME ADJUSTMENT
PROGRAMME SELECTION
1
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can
adjust the Language, Mode Setting, Power Indicator(When you select Home Use from
Mode Setting - Only LED LCD TV MODELS), Country or TimeZone (When Russia is select-
ed for Country) or Set Password(When France is selected for Country), Auto Tuning.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed
again.
b. Press the BACK button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might
not work, depending on the DTV broadcasting environment.
d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality
data, “Store Demo” mode initializes the product to the image quality set by us after a certain period
of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the
OPTION menu.
g
. When France is selected for Country, password is not
'0', '0', '0', '0'
but ‘1’, ‘2’, ‘3’, ‘4’.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the / I, INPUT or P
(
or P
)
button on the TV
or press the POWER, INPUT, P
or NUMBER button on the remote control and the TV
will switch on.
1
Press the P or NUMBER buttons to select a programme number.
1
Press the + or - button to adjust the volume.
2
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ , - or AV Mode button.
18
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Aspect Ratio: Selects your desired picture for-
mat.
For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After complet-
ing Zoom Setting, the display goes back to
Q.Menu.
Clear Voice II : By differentiating the human
sound range from others, it helps users lis-
ten to human voices better.
Picture Mode : Selects your desired Picture
Mode.
Sound Mode : It is a feature to automatical-
ly set the sound combination which it deems
the best for the images being watched.
Selects your desired Sound Mode.
Audio or Audio Language : Selects the sound
output
.
Sleep Timer : Sets the sleep timer.
Skip Off/On : Selects the Skip Off/On.
USB Device : SelectsEject in order to eject
USB device.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
Press the Q.MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Display each menu.
2
Select your desired Source.
3
Aspect Ratio
16:9
Exit
19
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
• Press the RED button, you can check the
Customer Support menu.
• Press the GREEN button, you can check
the Simple Manual menu.
Press the MENU/EXIT button to return to
normal TV viewing.
Press the BACK button to move to the pre-
vious menu screen.
NOTE
It is not possible to use CI Information in Analogue mode.
IR Blaster : For further information, refer to the optional “Wireless Media Box manual for operat-
ing instructions.
It is possible to use Movie List menu in 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***,
32/37/42/47/55LE5***.
1
Display each menu.
2
Select a menu item.
3
Move to the pop up menu.
OK
Move
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
TIME
OK
Move
Set Password
Lock System : Off
Block Programme
Parental Guidance : Blocking Off
Input Block
Key Lock : Off
LOCK
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
IR Blaster
OK
Move
OPTION
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
Sharpness 70
PICTURE
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Movie List Music ListPhoto List
MY MEDIA
Exit
Option
Press OK( ) to see photos from the USB.
SETUP PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
(Except for 19/22/26/32LD3
***
,
32/37/42/47LD4
***
, 19/22/26LE3
***
, 22/26LE5
***
)
Antenna USB
HDMI2 HDMI3 HDMI4HDMI1
AV1 AV2 Component
RGB
OK
Move
Input List
Input Label
Exit
AV3
20
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 1,000. But the number may differ slightly
depending on broadcasting signals.
DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable.
If you want to select the Antenna,
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Use NUMBER buttons to input a 4-digit
password in Lock System On’.
If you wish to keep on auto tuning select
Start using the
button. Then, press
the OK button. Otherwise select Close.
Automatic Numbering: Decide whether
to use the programme numbers as sent
by broadcasting stations for tuning.
When select Italy in the County menu, If
the pop up is displayed when the conflict-
ed programme after Auto Tuning, select a
broadcaster for Conflicting programme
number to solve.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Auto Tuning
OK
Move
● ● Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Auto Tuning
Please select your TV Connection.
CableAntenna
Close
If you select antenna or cable,
existing channel information is
deleted.
1
Select SETUP.
2
Select Auto Tuning.
3
Select Antenna.
4
Select Start.
5
Run Auto tuning.
Antenna Cable
Antenna Cable
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
SECAM L Search
Automatic Numbering
Start
Close
Antenna
Antenna
In the following country, DVB cable can be used : Germany, Netherlands, Sweden, Switzerland,
Denmark, Austria, Finland, Norway, Slovenia, Hungary.(The supported country can be added.)
21
WATCHING TV / PROGRAMME CONTROL
If you want to select the Cable,
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Auto Tuning.
3
Select Cable.
4
Select Comhem or Other
Operators.
5
Select Quick or Full.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Auto Tuning
OK
Move
● ● Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Auto Tuning
OK
Move
● ● Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Auto Tuning
Please select your TV Connection.
CableAntenna
Close
If you select antenna or cable,
existing channel information is
deleted.
Antenna Cable
Antenna Cable
Use NUMBER buttons to input a 4-digit
password in Lock System On’.
When you select the Cable, the Cable
Service Operator selection screen can
differ or not exist by the Cable situation of
the applicable country.
• The popup window to select
Service
Operator
is only shown initially for the 3
cases when you accessing the Initial
Setting menu, when you change from
Antenna to Cable or when you access
the menu after changing the Country.
When you want to select
Service Operator
aside from the above 3 cases, you can do
so by selecting Setup->Cable DTV
Setting-> Service Operator.
Acquired certification SO : Sweden(Comhem, Canal Digital), Denmark(YouSee, Canal Digital,
Stofa), Norway(Canal Digital).
If there are not any Service Operator that you want, select Other Operators.
If you select “Other Operators”, or the selected country supports “Other Operators” only, it may
take some time to search all the channels, or it may not search some of the channels.
If some of the channels do not appear, follow the steps below:
1. SETUP -> Auto Tuning -> Cable -> Setting
2. Switch Home Tuning from "Off" to "On"
3. Input additional values such as the frequency, symbol rate, modulation, and network ID.
(You can ask your cable service provider for the above information.)
Previous Next
Comhem
Other Operators
Service Operator
24
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
The following values are needed in order to search all available programmes quickly and correctly.
The commonly used values are provided as "default".
However, for correct settings, please inquire of the cable service provider.
When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to
find available channels.
In the case when the programme is not searched by selecting the Default, perform the searching by
selecting the Full.
However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be
taken too much.
Frequency : Enter a user-defined frequency.
Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as
modem sends symbols to a channel).
Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
Network ID : Unique identifier allocated for each user.
Start Frequency
: Enter a user-defined start frequency range.
End Frequency
: Enter a user-defined end frequency range.
25
WATCHING TV / PROGRAMME CONTROL
CABLE DTV SETTING
(IN CABLE MODE ONLY)
The range that a user can select from the Service Operator menu differs depending on number of
Service Operator supported by each country, and if number of supported Service Operator for each
country is 1, corresponding function becomes non-activation.
After changing Service Operator, a warning window saying that channel map will be deleted when OK
button is pressed or Close is selected, and a Auto-tuning pop-up window appears when YES is
selected.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Cable DTV Setting
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Cable DTV Setting
1
Select SETUP.
2
Select Cable DTV Setting.
3
Select Service Operator or Channel
Auto Update.
4
Select your desired Source.
Comhem
Channel Auto Update
Service Operator
Off
Close
If you select Cable, you can see Cable
DTV Setting menu.
When Channel Auto Update is On, you
can update information for all the pro-
grammes
that can be updated, including
the programme
currently being watched.
When Channel Auto Update is Off, you
can only update information for the pro-
gramme currently being watched.
26
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually add a programme to your programme list.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
(IN DIGITAL MODE)
1
Select SETUP.
2
Select Manual Tuning.
3
Select DTV.
4
Select the desired channel number.
5
Select update or add if signal present.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Frequency(kHz) 474000
DTV
UHF CH.
30
Close
Add
Signal Strength
50%
Signal Quality
50%
If you want to select the Antenna,
Use NUMBER
buttons to input a 4-digit
password in Lock System On’.
You can select SBAND when the country is set
to "Norway, Latvia."
27
WATCHING TV / PROGRAMME CONTROL
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Manual Tuning
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Manual Tuning.
3
Select Cable DTV.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
Cable DTV Setting
SETUP
Manual Tuning
If you want to select the Cable,
Cable DTV
Frequency(kHz)
362000
Symbol rate(kS/s)
6875
Modulation
64QAM
Close
Add
Signal Strength
50%
Signal Quality
50%
Use NUMBER
buttons to input a 4-digit
password in Lock System On’.
Symbol rate : Enter a user-defined
symbol rate (Symbol rate: Speed at
which a device such as modem sends
symbols to a channel).
Modulation : Enter a user-defined
modulation. (Modulation: Loading of
audio or video signals onto carrier).
Make appropriate adjustments.
4
28
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
(IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Use NUMBER
buttons to input a 4-digit password in Lock System On’.
L : SECAM L/L (France)
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa)
I : PAL I (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
To store another channel, repeat steps 4 to 9.
1
Select SETUP.
2
Select Manual Tuning.
3
Select TV or Cable TV.
4
or
Select the desired
programme
number on.
5
Select a TV system.
6
Select V/UHF or Cable.
or
7
Select the desired
channel number.
8
Commence searching.
9
Select Store.
Storage
Cable
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Storage
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
or
29
WATCHING TV / PROGRAMME CONTROL
You can assign a station name with five characters to each programme number.
Assigning a station name
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Manual Tuning.
3
Select TV or Cable TV.
4
Select Name.
5
Select the position and make
your choice of the second
character, and so on.
You can use an the alphabet
A to Z, the number 0 to 9, +/
-, and blank.
6
Select Close.
7
Select Store.
Normally fine tuning is only necessary if reception is poor.
Fine Tuning
Select Fine.
Select SETUP.
Select Manual Tuning.
Select Store.
6
Fine tune for the best picture
and sound.
1
2
Select TV or Cable TV.
3
4
5
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Storage
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Storage
Cable
TV
3
System
BG
Band
V/UHF
Channel
◄ ►
◄ ►
Fine
Search
0
Name
C 02
Close
Store
or
30
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P button
during TV viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked
when you start Auto Tuning.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select SETUP.
2
Select Programme Edit.
3
Enter the Programme Edit.
4
Select a programme to be stored or
skipped.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
Manual Tuning
Manual Tuning
Manual Tuning
Manual Tuning
Programme Edit
Previous
Page Change
P
Block/Unblock Skip
Pr. Change
DTV
RADIO
TV
800 YLE TV1
803 YLE24
806 Kanal Lokal
809 TV4 Plus
812 TV4 Fakta
815 Demo
818 24H TVE
801 YLE TV2
804 YLE Teema
807 CNN
802 YLE FST
805 TV4 Stockholm
808 TV4
810 TV400
813
MediaCorp HD5
811 TV4 Film
814 SNY_SSU
816 TVE 1 817 TVE 2
819 CLAN/50 TVE 820 LA7
Page 1/2
Programme Edit
Favourite Group :
A
Favourite Pr. Group
Q.MENU
Favourite Pr.
FAV
Previous
Page Change
P
Block/Unblock Skip
Pr. Change
Cable DTV
Cable Radio
Cable TV
800 YLE TV1
803 YLE24
806 Kanal Lokal
809 TV4 Plus
812 TV4 Fakta
815 Demo
818 24H TVE
801 YLE TV2
804 YLE Teema
807 CNN
802 YLE FST
805 TV4 Stockholm
808 TV4
810 TV400
813
MediaCorp HD5
811 TV4 Film
814 SNY_SSU
816 TVE 1 817 TVE 2
819 CLAN/50 TVE 820 LA7
Page 1/2
Programme Edit
Favourite Group :
A
Favourite Pr. Group
Q.MENU
Favourite Pr.
FAV
or
31
WATCHING TV / PROGRAMME CONTROL
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
Skipping a programme number
IN TV MODE
Deleting a programme
Moving a programme
IN DTV/RADIO MODE
When programmes are to be skipped, the
skipped programme shows in blue and
these programmes will not be selected by
the P buttons during TV viewing.
If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit or EPG.
The selected programme is deleted, all the
following programmes are shifted up one
1
Select a programme number to be skipped.
2
BLUE
Turn the programme number to blue.
3
BLUE
Release.
1
Select a programme number to be deleted.
2
RED
Turn the programme number to red.
1
Select a programme number to be moved.
2
GREEN
Turn the programme number to
green.
3
GREEN
Release.
Locking a programme number
1
Select a programme number to be locked.
2
YELLOW
Turn the programme number to yellow.
3
YELLOW
Release.
It can be registered as Lock
programme even when Lock
System is turned Off.
32
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Auto Sort
After activating Auto Sort once, you can no
longer edit programmes.
1
Start Auto Sort.
Skipping a programme number
When a programme number is skipped it
means that you will be unable to select it
using the P button during normal TV
viewing.
If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit or EPG.
1
Select a programme number to be skipped.
2
BLUE
Turn the programme number to blue.
3
BLUE
Release.
Selecting favourite programme
1
Select your desired programme.
2
Add corresponding programme to Favourite
list of current Favourite group.
3
Release.
Favourite programmes is a convenient feature that lets you quickly scan up to programmes of your
choice without having to wait for the TV to scan through all the in-between programmes.
Locking a programme number
1
Select a programme number to be locked.
2
YELLOW
Turn the programme number to yellow.
3
YELLOW
Release.
It can be registered as Lock
programme even when Lock
System is turned Off.
33
WATCHING TV / PROGRAMME CONTROL
Selecting favourite programme group
1
Select your desired programme.
2
Display a pop-up window where
Favourite group can be changed.
3
Select a Favourite group.
34
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (pay services). If you remove the CI
Module, you cannot watch pay services.
When the module is inserted into the CI slot, you can access the module menu.
To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI
module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI
Module, you may not have any sound output.
This may be incompatible with the CI module and smart card.
CI (Common Interface) functions may not be possible depending upon the country broadcasting cir-
cumstances.
When using a CAM(Conditional Access Module), please make sure it meets fully the requirements of
either DVB-CI or CI plus.
Viaccess Module
Select the item
Consultations
Authorizations
Module information
Press the BACK/EXIT button to move to the previous menu screen.
This OSD is only for illustration and the menu
options and screen format will vary according to
the Digital pay services provider.
It is possible for you to change CI (Common
Interface) menu screen and service by consult-
ing your dealer.
1
Select SETUP.
2
Select CI Information.
3
Select the desired item: Module information, smart card
information, language, or software download etc.
4
Save.
OK
Move
Auto Tuning
Manual Tuning
Programme Edit
CI Information
SETUP
CI Information
i
36
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
When setting “Software Update
Occasionally, a transmission of
updated digital software infor-
mation will result in the following
menu on the TV screen.
Simple Update : for current
update stream
Schedule Update : for scheduled
update stream
A window as display below
appears when download
completes.
TV is restarted when "Yes" is
selected.
When the Software Update menu
is "Off", the message to change it
to "On" appears.
Download starts when "Yes" is
selected. At this time, pro-
gressing pop-up window does
not display.
Download progress status can
be checked from Software
Update menu.
- During Progress of a Software Update, please note the following:
Power to the TV must not be interrupted.
The antenna must not be disconnected.
After Software Update, you can confirm the updated software version in Software Update menu.
It may take hours to download the software, so make sure that the power stays on during the download.
The software is downloaded only in Standby mode or in MUX with Software Update Service, and stops
when the power cord is unplugged or when viewing MUX without Software Update Service.
When you return to Standby mode or MUX with Software Update Service, the software download will
resume from where it stopped.
Yes
No
Software update is available.
Would you like to download now?
?
Yes
No
A new software update is available at
00/00/0 00:00.
Do you want to update the software when
available?
?
Yes
No
New software version is ready. If you want
to install now, TV will be turned off and
restart. Continue?
Software Update
Close
Software downloading progress.
Ver. 00.00.01 ► Ver.00.00.00
◄ On ►
4%
37
WATCHING TV / PROGRAMME CONTROL
PICTURE/SOUND TEST
This function is a customer support function that can execute picture and sound tests.
Press OK( ) to set programme settings.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
Picture Test
Close
1
Select Customer Support.
2
Select Picture Test or Sound Test.
3
Select Yes or No.
RED
Yes No
Do you have a problem in this test
screen?
?
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
38
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and
Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple chan-
nels.))
Engineering Diagnostics
Manufacturer : LG Electronics Inc.
Model/Type : 42LD450-ZA
Serial No. : SKJY1107
Software Version : V00.00.01
Ch 34
Ch 36
Ch 38
Ch 54
Ch 60
Exit
MENU
Popup
Prev.
Ch 30
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
Signal Test
Close
1
Select Customer Support.
2
Select Signal Test.
3
Display Manufacturer, Model/Type, Serial Number and
Software Version.
4
Display the information of Channel.
RED
Press OK( ) to set programme settings.
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
39
WATCHING TV / PROGRAMME CONTROL
PRODUCT/SERVICE INFORMATION
This function is a customer support function that can see product/service information and customer service center
information.
Press OK( ) to set programme settings.
Software Update
Picture Test
Sound Test
Signal Test
Product/Service Info.
Product/Service Info.
Close
1
Select Customer Support.
2
Select Product/Service Info..
3
Display MODEL/TYPE, Software version, Serial Number,
Used time, Customer service center and Homepage.
RED
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
40
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
Press the EXIT button to return to normal TV viewing.
Press OK( ) to set programme settings.
1
Select Simple Manual.
2
Select the part of the manual you want to see.
PICTURE
LOCK
OPTION
AUDIO
INPUT
TIME
MY MEDIA
SETUP
Exit
Customer Support
Simple Manual
GREEN
Image shown may differ from your TV.
RED : Go to the Index page.
BLUE : Play the Simple Manual automatically
or manually.
41
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Displayed when the
Locked Programme.
Mini Glossary
Displaying programme LIST
Selecting a programme in the programme list
You may find some blue programmes.
These have been set up to be skipped by
auto programming or in the programme
edit mode.
Some programmes with the channel num-
ber shown in the programme LIST indicate
there is no station name assigned.
The mode will be switched
between TV, DTV, and Radio
from the program you are cur-
rently watching.
1
Display the Programme List.
1
Select a programme.
2
Switch to the chosen programme number.
BLUE
Turn the programme edit.
Programme List
1 BBC
2 BBC
3 BBC
4 BBC
Pr.Edit
Exit
5 BBC
A
42
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Displaying the favourite programme
list
Paging through a programme list
1
Turn the pages.
2
Return to normal TV viewing.
1
Display the Favourite Programme List.
Favourite List
1 BBC
2 BBC
3 BBC
Group B
◄ ►Favourite Pr. Group
BLUE
Turn the programme edit.
YELLOW
Current channel is registered/
cancelled as preferred channel on
currently selected Group.
Favourite group is changed.
Pr.Edit
Pr.Reg.
Exit
43
WATCHING TV / PROGRAMME CONTROL
Antenna or Cable : Select it when watch-
ing the DTV/RADIO/TV.
USB : Select it when using USB depends
on connector.
AV : Select it when watching the VCR or
external equipment.
Component : Select it when using the
DVD or the Digital set-top box depends on
connector.
RGB :Select it when using PC depends on
connector.
HDMI : Select it when using DVD, PC or
Digital set-top box depend on connector.
INPUT LIST
HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an external
device approves voltage.
By using TV/RAD button, you can move from External Input to RF Input and to the last watched pro-
gramme in DTV/RADIO/TV mode.
1
Select the input source.
Antenna USB
HDMI2 HDMI3 HDMI4HDMI1
AV1 AV2 Component
RGB
OK
Move
Input List
Input Label
Exit
AV3
Image shown may differ from your TV.
44
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select Input Label.
2
Select the source.
3
Select the label.
BLUE
Input Label
AV1
AV2
AV3
Component
RGB
Close
Antenna USB
HDMI2 HDMI3 HDMI4HDMI1
AV1 AV2 Component
RGB
OK
Move
Input List
Input Label
Exit
AV3
Image shown may differ from your TV.
46
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable with-
out additional cables and settings.
If you do not want SIMPLINK menu,select Off”.
In wireless external output, SIMPLINK function is not supported.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Display the SIMPLINK.
2
Select On or Off.
3
Save.
On
Watch TV
DISC
VCR
VCR
Speaker
TV Speaker
HDD Recorder
OK
Exit
47
WATCHING TV / PROGRAMME CONTROL
Connecting to Home Theater with the SIMPLINK logo.
NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK
device with the HDMI cable.
When you switch the Input source using the INPUT button on the remote control, you can stop the opera-
tion of a device controlled by SIMPLINK.
When you select or operate a media device with
home theater function, the speaker automatically
switches to home theater speaker (HT speaker).
1
Connect the
HDMI/DVI IN 1, HDMI IN 2
(Except for 19/22LD3
***
), HDMI IN 3 (Except
for 19/22/26/32LD3
***
, 32/37/42/47LD4
***
,
19/22LE3
***
, 22LE5
***
) or HDMI IN 4 (Only
32LE3
***
, 32/42/47LE4
***
,
32/37/42/47/55LE5
***
)
terminal on the back of
the TV and the HDMI output terminal of the
Home Theater using HDMI cables.
2
Connect the Digital Audio output terminal on
the back of the TV and the Digital Audio input
terminal of the Home Theater using optical
cables.
3
Select Home Theater in the Speaker menu by
pushing the SIMPLINK button.
1 2
Home Theater
48
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Disc playback
Control connected AV devices by pressing the
, OK, ►,
, l l, ◄◄ and ►►
buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional set-
tings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically
to turn on mode.
* A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK,
does not provide this function.
Note: To operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used.
(*CEC: Consumer Electronics Control).
SIMPLINK Functions
49
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Menu
Press the
button and then OK button to select the desired SIMPLINK source.
TV viewing : Switch to the previous TV pro-
gramme regardless of the current mode.
DISC playback : Select and play connected
discs.
When multiple discs are available, the device
type of discs are conveniently displayed at
the bottom of the screen.
VCR playback : Play and control the con-
nected VCR.
HDD Recordings playback : Play and con-
trol recordings stored in HDD.
Audio Out to Home theater/Audio Out to
TV: Select Home theater or TV speaker for
Audio Out.
1
2
3
4
5
Home theater: Only one supported at a time
DVD, Recorder: Up to one(Only 19/22LD3
***
), two(Only 26/32LD3
***
, 32/37/42/47LD4
***
,
19/22LE3
***
, 22LE5
***
), three(Only 32/42/46/52/60LD5
***
, 26LE3
***
, 26LE5
***
), four(Only 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
) supported at a time.
VCR: Only one supported at a time
On
Watch TV
DISC
VCR
VCR
Speaker
TV Speaker
HDD Recorder
OK
Exit
Selected Device
When a device is con-
nected (displayed in
bright colour)
When device is not con-
nected (displayed in
gray)
1
2
3
4
5
50
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Off Cinema
Game Sport
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Disables the AV MODE.
Cinema Optimizes video and audio for watching movies.
Sport Optimizes video and audio for watching sports events.
Game Optimizes video and audio for playing games.
If you select Cinema in AV mode, Cinema will be selected both for
Picture Mode and Sound Mode in PICTURE menu and AUDIO menu
respectively.
If you select Offin AV mode, the picture and image which you initially
set will be selected.
1
A
V MODE
Press the AV MODE button repeatedly to select the desired source.
2
51
WATCHING TV / PROGRAMME CONTROL
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Factory Reset
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
But the settings of Day and Night of the Picture Mode cannot be initialized.
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
When the Lock System menu is "On", the message to enter the password appears.
Yes
No
All user settings and channel settings will
be reset. Still Continue?
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
In Lock System "On", if you forget your
password, press '0', '3', '2', '5' on the
remote control hands et.
1
Select OPTION.
2
Select Factory Reset.
3
Select Yes.
4
Start Factory Reset.
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Factory Reset
52
TO USE A USB DEVICE
TO USE A USB DEVICE
WHEN CONNECTING A USB DEVICE
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activat-
ed.
When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA
menu.
In USB device, you can not add a new folder or delete the existing folder.
When removing the USB device
Connect the USB device to the USB IN
jack on the TV.
3
Select Movie List (Only
32/40/46/55LE4***, 19/22/26/32LE3
***
,
32/37/42LE4
***
, 22/26LE5
***
,
32/37/42/47/55LE5
***
), Photo List or
Music List.
1
Select the USB Device menu before removing
the USB device.
2
Only photo(JPEG), music (MP3) and movie
(DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,T
S,TRP,TP,ASF,WMV,FLV) are supported.
Movie List Music ListPhoto List
MY MEDIA
Exit
Option
Press OK( ) to see photos from the USB.
1
Select USB Device.
2
Select Eject.
or
53
TO USE A USB DEVICE
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
A USB storage device using an automatic recognition programme may not be recognized.
A USB storage device which uses its own driver may not be recognized.
The recognition speed of a USB storage device may depend on each device.
Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be
damaged.
Please do not connect the USB storage device which was artificially maneuvered on the PC. The
device may cause the product to malfunction or fail to be played. Never forget to use only a USB stor-
age device which has normal music files, image files or movie files.
Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system
provided with the Windows operating system. In case of a storage device formatted as a different utility
programme which is not supported by Windows, it may not be recognized.
Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If
not, the device may not be recognized.
Please connect a USB storage device with the cable offered by the device maker.
Some USB storage devices may not be supported or operated smoothly.
File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100
English characters.
Be sure to back up important files since data stored in a USB memory device may be damaged. We
will not be responsible for any data loss.
If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to
connect the external power source. - Please use a power adaptor for an external power source. We do not guar-
antee an USB cable for an external power source.
If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use
up to 4 partitions or USB memory devices.
If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
If the USB memory device does not work properly, disconnect and reconnect it.
How fast a USB memory device is detected differs from device to device.
If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is
turned on.
The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB
memory.
Any device with more than the recommended capacity may not work properly.
If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on
again to make it work properly.
USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
Maximum of 999 folders or files can be recognized under one folder.
Select USB Device.
Select Eject.
55
TO USE A USB DEVICE
File
Extension name
Video Decoder Audio Codec Max Resolution
mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM
1920x1080@30p
(only , Motion JPEG
640x480@30p)
dat MPEG1 MP2
ts,trp,tp MPEG2, H.264, AVS, VC1
MP2,MP3,Dolby Digital
vob MPEG1, 2 MP2,MP3,Dolby Digital,LPCM
mp4, mov
MPEG4,DivX 3.11, DivX 4.12, DivX 5.x,
DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02,
Xvid 1.03, Xvid 1.10-beta1/2H.264
MP3
mkv H.264, MPEG-1,2,4
MP2,MP3,Dolby
Digital,LPCM
divx, avi
MPEG2, MPEG4,DivX 3.11, DivX 4.
DivX 5, DivX 6, Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
MP2,MP3,Dolby Digital,LPCM,
ADPCM
Motion JPEG
(avi, mp4, mkv)
JPEG LPCM, ADPCM
asf, wmv VC1 WMA
flv Sorenson H.263, H264 MP3
56
TO USE A USB DEVICE
TO USE A USB DEVICE
Screen Components
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on
1
Current page/ total pages of
contents under the folder
focused on
1
1
3
4
5
2
Select MY MEDIA.
Select Movie List.
2
1
You can also adjust USB in the INPUT menu.
Page 1/1
Movie List
Drive1
Page 1/1
Mark
MARK
Play Page Change
Move
P
003
001 002
004
005 006
2
1
3
4
5
To Photo List
Change Numbers
Mark Mode
Exit
• Some files may be displayed
the preview image by icon
only.
• Non-supported files are
displayed the preview
image by icon only.
Abnormal files are
displayed in the
form of bitmap.
57
TO USE A USB DEVICE
Movie Selection
When playing movie files
Use the P
button to navigation in the
movie page.
1
Select the target folder or drive.
2
Select the desired movie title.
3
Movie files are played.
GREEN
Repeatedly, press the GREEN button to converted to Photo List->Music List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
EXIT
Return to normal TV viewing.
Press the PLAY
(
)
button to return to normal playback.
Using the remote control
Page 1/1
Movie List
Drive1
Page 1/1
Mark
MARK
Play Page Change
Move
P
003
001 002
004
005 006
051. Apple_ ......
02:30:25
To Photo List
Change Numbers
Mark Mode
Exit
58
TO USE A USB DEVICE
TO USE A USB DEVICE
NOTE
In the case of files not supported, a message regarding non-supported file is displayed.
When selected movie files are played
1
Select the target folder or drive.
2
Select the desired movie title.
3
or
BLUE
Convert to Mark Mode.
4
Mark desired Movie file.
5
Marked movie file is played.
When one or more movie files are
marked, the marked movies will
be played in sequence.
Page 1/1
Movie List
Drive1
Page 1/1
003
001 002
004
005 006
Mark
MARK
Mark Page Change
Move
P
Exit Mark Mode
Unmark All
Mark All
Play Marked
Exit
051. Apple_ ......
02:30:25
RED
Mark Mode
59
TO USE A USB DEVICE
RED
Play the selected movie file.
Once a movie file finishes playing, the next selected one will be played automatically.
GREEN
Mark all movie files on the screen.
YELLOW
Deselect all marked movie files.
BLUE
Exit the Mark Mode.
EXIT
Return to normal TV viewing.
Using the remote control
NOTE
If you select “Yes” from OSD when playing the same file after the movie file has been stopped, it will restart
where it stopped previously.
If continuous series files exist within the folder, the next file will automatically be played.
But, this excludes cases when the Repeat function of Movie List Option is turned On(Refer to p. 62) or
when set as Marked Play.
60
TO USE A USB DEVICE
TO USE A USB DEVICE
Option
Hide
Q.MENU
01:02:30 / 02:30:25
◄►
II ◄◄ ►►
Choose options.
Set Video Play.
Set Video.
Set Audio.
Close
Using the Movie List function, play
NOTE
Option values changed in Movie List does not affect Photo List and Music List.
Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
When replaying the video file after stopping, you can play from where it stopped previously.
Exit
Show the Option menu.
Select Set Video Play., Set Video. or Set
Audio..
1
or
2
61
TO USE A USB DEVICE
Stop the playing movie file.
Press the PLAY
(
)
button to return to normal playback.
II
During playback, press the Pause
(
II
)
button.
Still screen is displayed.
If no buttons are pressed on the remote control for 10 minutes after pausing, the
TV returns to the playback state.
Press the Pause
(
II
)
button and then use the FF(►►) button for slow motion.
◄◄
/ ►►
When playing,
repeatedly, press the REW
(
◄◄
)
button to speed up ◄◄(x2)
-> ◄◄◄(x4) ->
◄◄◄◄(x8) ->◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32) .
repeatedly, press the FF
(
►►
)
button to speed up ►►(x2)-> ►►►(x4) ->
►►►►(x8) ->►►►►►(x16) -> ►►►►►►(x32).
Pressing these buttons repeatedly increases the fast forward/reverse speed.
or
Show the Option menu.
Hide the menu on the full-sized screen.
To see the menu again on the full-sized screen, press OK button to display.
Return to normal TV viewing.
< >
When using the
<
or
>
button during playback a cursor indicating the position can
be viewed on the screen.
ENERGY
SAVING
Press the ENERGY SAVING button repeatedly to change the brightness of your
screen.(Refer to p. 95)
A
V MODE
Press the AV MODE button repeatedly to select the desired source.(Refer to p. 50)
Using the remote control
62
TO USE A USB DEVICE
TO USE A USB DEVICE
Picture Size : Selects your desired picture
format during movie play.
Audio Language : Changes the Language
Group of the audio during movie play.
Files
with a single audio track cannot be selected.
Subtitle Langugae
: Turn on/off the subtitle.
Subtitle : Turn on/off the external subtitle.
Language : Activated for SMI subtitle and
can select the language within the subtitle.
Code page : Can select the font for subti-
tle. When set to default, same font as gen-
eral menu will be used.
Sync : Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs by
steps of 0.5 secs during movie play.
Position : Changes the position of the
subtitle either up or down during movie
play.
Size : Selects your desired Subtitle size
during movie play.
Repeat : Turn on/off repeat function of
movie playback. When turned on, the file
within the folder will be played back
repeatedly. Even when the repeated play-
back is turned off, it can run the playback if
the file name is similar to the previous file.
When you select the Set Video Play,
Set Video Play.
Full
Picture Size
Audio Language
1
On
Subtitle Language
Previous
0
● Position
Normal
● Size
0
● Sync
English
● Language
Default
● Code page
On
Repeat
NOTE
Only 10,000 of sync blocks can be supported within the subtitle file.
When playing a video, you can adjust the Picture Size by pressing the RATIO button.
Subtitle Language Support Language
Latin1
English, Spanish, French, German, Italian, Swedish,
Finnish, Dutch, Portuguese, Danish, Romanian,
Norwegian, Albanian, Gaelic, Welsh, Irish,
Catalan,Valencian
Latin2
Bosnian, Polish, Croatian, Czech,
Slovak, Slovenian, Serbian, Hungarian
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian, Ukrainian, Kazakh
Greek
Greek
Turkish
Turkish
Select Picture Size, Audio Language,
Subtitle Langugae or Repeat.
2
Make appropriate adjustments.
1
63
TO USE A USB DEVICE
When you select the Set Video,
Set Video.
Picture Mode
● Dynamic Contrast
Previous
● Backlight 70
● Brightness 50
● Colour 60
● Contrast 100
Standard
Medium
● Edge Enhancer
High
● Noise Reduction
Medium
TruMotion
Low
Picture Reset
(Only 32/42/46/52/60LD5
***
,
32/37/42/47/55LE5
***
)
Select Picture Mode or TruMotion.
2
Make appropriate adjustments. (Refer to p. 96 to 103)
1
64
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Audio,
Set Audio.
Standard
Sound Mode
Off
Auto Volume
Off
Clear Voice II
Balance 0
Previous
L R
Select Sound Mode, Auto Volume, Clear Voice II or
Balance.
2
Make appropriate adjustments. (Refer to p. 107 to 111)
1
65
TO USE A USB DEVICE
Screen Components
You can view photo files on USB storage device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO LIST
PHOTO(*.JPEG) supporting file
Baseline : 64 x 64
to
15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
• You can play JPEG files only.
Non-supported files are displayed in the form of predefined icon.
You can also adjust USB in the INPUT menu.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on
1
Current page/ total pages of
contents under the folder
focused on
1
1
3
2
Select MY MEDIA.
Select Photo List.
2
1
4
5
Page 1/1
Photo List
Drive1
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
Page 1/1
2
1
3
4
5
Mark
MARK
View Page Change
Move
P
To Music List
Change Numbers
Mark Mode
Exit
66
TO USE A USB DEVICE
TO USE A USB DEVICE
GREEN
Repeatedly, press the GREEN button to converted to Music List->Movie List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
Return to normal TV viewing.
Using the remote control
Photo Selection
When playing photo files
1
Select the target folder or drive.
2
Select the desired photos.
3
Photo files are displayed.
Use the P
button to navigation in the
photo page.
Page 1/1
Photo List
Drive1
Page 1/1
Mark
MARK
View Page Change
Move
P
To Music List
Change Numbers
Mark Mode
Exit
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
67
TO USE A USB DEVICE
When selected photo files are displayed
1
Select the target folder or drive.
2
Select the desired photos.
3
or
BLUE
Convert to Mark Mode.
4
Mark desired photo file.
5
Marked photo file is displayed.
When one or more photos are marked, you
can view each marked photo or a slide show
of the marked photos. If no photos are
marked, you can view every individual photo
in the folder or a slide show of all photos in
the folder.
Page 1/1
Photo List
Drive1
Page 1/1
Mark
MARK
Mark Page Change
Move
P
Exit Mark Mode
Unmark All
Mark All
View Marked
Exit
Mark Mode
RED
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
68
TO USE A USB DEVICE
TO USE A USB DEVICE
RED
Display the selected photo file.
GREEN
Mark all photo files on the screen.
YELLOW
Deselect all marked photo files.
BLUE
Exit the Mark Mode.
Return to normal TV viewing.
Using the remote control
69
TO USE A USB DEVICE
How to view photo
2/13
Detailed operations are available on full-sized photo view screen.
Use the P button to navigation in the
photo page.
1
Select the target folder or drive.
2
Select the desired photos.
3
The selected photo is displayed in full
size.
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
Press the EXIT button to move to the previous
menu screen.
Press the EXIT button to go back to Photo List.
Press the BACK button to make Help OSD disappear.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Page 1/1
Photo List
Drive1
Page 1/1
Mark
MARK
View Page Change
Move
P
Slideshow
BGM
Hide
Option
Q.MENU
Exit
To Music List
Change Numbers
Mark Mode
Exit
001
010 011 012 013 014 015
002
003
004 005
006
007
008
009
70
TO USE A USB DEVICE
TO USE A USB DEVICE
Slideshow : When no picture is selected, all photos in the cur-
rent folder are displayed during slide show. If some photos are
selected, those photos are displayed in a slide show.
Set the time interval of the slide show in Option.
BGM (Background Music) : Listen to music while viewing photos
in full size.
Set the BGM device and album in Options before using
this function.
You can adjust Option by Q.MENU or MENU button on
the remote control.
(Rotate)
: Rotate photos.
Rotates the photo 90°, 180°, 270°, 360° clockwise.
It can not be rotate when the width of a picture is bigger
than supported height.
(
ZOOM IN
): View the photo by zoom in 2, 4 times.
:
Press the ENERGY SAVING button repeatedly to
change the brightness of your screen.(Refer to p. 95)
Option :
Set values for Slide Speed and BGM.
Use button and OK button to set values. Press
OK to save the settings.
You cannot change BGM while BGM is playing.
Hide : Hide the menu on the full-sized screen.
To see the menu again on the full-sized screen, press
OK button to display.
Press the EXIT button to go back to Photo List.
Use
button to select the previous
or next photo.
Use
button to select and control
the menu on the full-sized screen.
4
Select the
Slideshow,
BGM,
(Rotate),
(ZOOM IN), ,
Option, Hide or
Exit.
2/13
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Slideshow
BGM
Hide
Option
Q.MENU
Exit
71
TO USE A USB DEVICE
2/13
Choose options.
Set Photo View.
Set Video.
Set Audio.
Close
Using the Photo List function
NOTE
Option values changed in Movie List does not affect Photo List and Music List.
Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
Slideshow
BGM
Hide
Option
Q.MENU
Exit
Show the Option menu.
Select Set Photo View., Set Video. or Set
Audio..
1
or
2
01_a.jpg
2008/12/10
1920 x 1080
479 KB
72
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Photo View,
Drive1
Previous
Set Photo View.
BGM
Fast
Slide Speed
On
● Repeat
Off
● Random
Select Slide Speed or BGM.
2
Make appropriate adjustments.
1
73
TO USE A USB DEVICE
When you select the Set Video,
Set Video.
Picture Mode
● Dynamic Contrast
Previous
● Backlight 70
● Brightness 50
● Colour 60
● Contrast 100
Standard
Medium
● Edge Enhancer
High
● Noise Reduction
Medium
TruMotion
Low
Picture Reset
(Only 32/42/46/52/60LD5
***
,
32/37/42/47/55LE5
***
)
Select Picture Mode or TruMotion.
2
Make appropriate adjustments. (Refer to p. 96 to103)
1
74
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Audio,
Set Audio.
Standard
Sound Mode
Off
Auto Volume
Off
Clear Voice II
Balance 0
Previous
L R
Select Sound Mode, Auto Volume, Clear Voice II or
Balance.
2
Make appropriate adjustments. (Refer to p. 107 to 111)
1
75
TO USE A USB DEVICE
MUSIC LIST
You can play music files on USB storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate 32
to
320
Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz
Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz
Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz, 12 kHz
Screen Components
Preview: If any album jacket
for the file(Album Art Image)
exists, this jacket is displayed.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on
2
Current page/ total pages of
contents under the folder
focused on
2
1
3
2
Select MY MEDIA.
Select Music List.
2
1
4
5
6
You can also adjust USB in the INPUT menu.
Page 1/1
Music List
Drive1
Page 1/1
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
3
2
1
5
6
Mark
MARK
Play Page Change
Move
P
4
Change Numbers
Mark Mode
Exit
To Movie List
(Only 19/22/26/32LE3
***
, 32/37/42LE4
***
,
22/26LE5
***
, 32/37/42/47/55LE5
***
)
76
TO USE A USB DEVICE
TO USE A USB DEVICE
Music Selection
When playing music files
1
Select the target folder or drive.
2
Select the desired music title.
3
Music files are played.
Use the P button to navigate up/down in
the music page.
Page 1/1
Music List
Drive1
Page 1/1
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Mark
MARK
Play Page Change
Move
P
GREEN
Repeatedly, press the GREEN button to converted to Movie List->Photo List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
Return to normal TV viewing.
Using the remote control
Change Numbers
Mark Mode
Exit
To Movie List
77
TO USE A USB DEVICE
When selected music files are played
1
Select the target folder or drive.
2
Select the desired music title.
3
or
BLUE
Convert to Mark Mode.
4
Mark desired music file.
5
Marked music file is played.
Page 1/1
Music List
Drive1
Page 1/1
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Mark
MARK
Mark Page Change
Move
P
When one or more music files are marked,
the marked music title will be played in
sequence. For example, if you want to listen
to only one music repeatedly, just mark the
music only and play it. If no music is marked,
all the music in the folder will be played in
sequence.
If you want to activate Random playback, you
must set Option->Set audio play.->Random
to On.
Exit Mark Mode
Unmark All
Mark All
Play Marked
Exit
Mark Mode
RED
78
TO USE A USB DEVICE
TO USE A USB DEVICE
RED
Display the selected music file.
GREEN
Mark all music files on the screen.
YELLOW
Deselect all marked music files.
BLUE
Exit the Mark Mode.
Return to normal TV viewing.
Using the remote control
79
TO USE A USB DEVICE
Choose options.
Set Audio Play.
Set Audio.
Close
Page 1/1
Music List
Drive1
Page 1/1
3 file(s) Marked
004. - B04.mp3
00:00
005. - B05.mp3
00:00
006. - B06.mp3
00:00
007. - B07.mp3
00:00
008. - B08.mp3
00:00
Hide
Exit
Option
Q.MENU
Play with Photo
005. - B05.mp3
02:30 / 03:25
◄►
Using the Music List function, play
NOTE
Option values changed in Movie List does not affect Photo List and Music List.
Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
II
◄◄ ►►
Show the Option menu.
Select Set Audio Play. or Set Audio.
1
or
2
80
TO USE A USB DEVICE
TO USE A USB DEVICE
Using the remote control
Stop the playing music file.
Press the PLAY
(
)
button to return to normal playback.
II
When you press the Pause
(
II
)
button while playing the file, the playback will be
paused.
When you press the Pause
(
II
)
button again while the playback is paused, it will
resume the playback.
◄◄
/ ►►
When playing,
When you press the REW
(
◄◄
)
button, the previous music file will be played.
When you press the FF
(
►►
)
button, the next music file will be played.
GREEN
Start playing the selected music files and then move to the Photo List.
ENERGY
SAVING
Press the ENERGY SAVING button repeatedly to change the brightness of your
screen.(Refer to p. 95)
Only Off/Screen Off operates from the Movie List, Photo List, Music List.
or
Show the Option menu.
When you press the Back button while the music is playing, the music player cur-
rently playing will be hidden and only the music list will be displayed.
When you press the Exit button while the Music player is displayed, only the
music will be stopped and the player will not return to normal TV viewing.
When you press the Exit button while the music is stopped or while the music
player is hidden, the player will return to normal TV viewing.
< >
When using the
<
or
>
button during playback a cursor indicating the position can
be played.
81
TO USE A USB DEVICE
When you select the Set Audio Play,
Previous
Set Audio Play.
On
Repeat
Off
Random
Select Repeat or Random.
2
Make appropriate adjustments.
1
82
TO USE A USB DEVICE
TO USE A USB DEVICE
When you select the Set Audio,
Set Audio.
Standard
Sound Mode
Off
Auto Volume
Off
Clear Voice II
Balance 0
Previous
L R
Select Sound Mode, Auto Volume, Clear Voice II or
Balance.
2
Make appropriate adjustments. (Refer to p. 107 to 111)
1
83
TO USE A USB DEVICE
NOTE
A damaged or corrupted music does not play but displays 00:00 in playtime.
A music downloaded from a paid service with copyright protection does not start but displays inappropriate
information in playtime.
If you press OK, buttons, screen saver is stopped.
The PLAY(►), Pause(II), , ►►, ◄◄ buttons on the remote control are also available in this mode.
You can use the ►► button to select the next music and the ◄◄ button to select the previous music.
If you don't press any button for a while during the playing, the
play information box (as shown in the below) will float as a
screen saver.
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period of
time.
002. B02.mp3
► 00:31 / 04:04
84
TO USE A USB DEVICE
TO USE A USB DEVICE
DIVX REGISTRATION CODE
(Only 19/22/26/32LE3
***
, 32/37/42LE4
***
, 22/26LE5
***
, 32/37/42/47/55LE5
***
)
Confirm the DivX registration code number of the TV. Using the registration number, movies can be
rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
(Only DivX files matched with the registration code of the purchased TV are playable.)
NOTE
Movie files are supported as follows
Resolution : under 1920x1080 WxH pixels
Frame rate : under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00,
Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson H.263/H.264.
Press the MENU/EXIT button to return to normal TV viewing.
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
Movie List
Music List
Photo List
MY MEDIA
Exit
Option
Press OK( ) to see photos from the USB.
1
Select MY MEDIA.
BLUE
2
Select DivX Reg. Code.
3
Display DivX Reg. Code.
Previous
DivX Reg.Code
Deactivation
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by DivX,Inc. This
is an official DivX Certified device that plays DivX video. Visit www.divx.com
for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
device must be reg-
istered in order to play DivX Video-on-Demand (VOD) content. To generate
the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and
learn more about DivX VOD.
“DivX Certified to play DivX video up to HD 1080p, including premium content”
“Pat. 7,295,673; 7,460,688; 7,519,274”
Shows current programme information
Displayed with a Teletext Programme.
Displayed with a Subtitle Programme.
Displayed with a Scramble Programme.
Displayed with a Dolby Digital Programme.
Displayed with a TV or DTV Programme.
Displayed with a Radio Programme.
Displayed with a MHEG Programme.
Displayed with a MPEG Programme.
Aspect
ratio of broadcasting programme.
Displayed with a Dolby Digital PLUS Programme.
Aspect ratio of broadcasting programme. 576i/p, 720p, 1080i/p : Resolution of broadcasting programme
Broadcasted programme with the icon may not be displayed in Monitor Out depending on the informa-
tion of the programme.
86
EPG(ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible
viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In
addition, detailed information about the programme is often available in the EPG (the availability and
amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
You must set the Clock in the Time menu, before using EPG function.
The EPG displays the programme details for 8 days.
Shows next programme information.
Shows other programme information.
DTV 1 TV ONE
Good Morning
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
21:00
00:00 Show/Game Show
Watch
► Next
Pr. Change
16:9
720p
...
MPEG
Up
Down
A pop-up window for record/remind settings
appear.
Select Timer Record/Remind setting mode.
DTV 2 TV2
Tyra
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
Talk show host Tyra Banks sits down with Keyshia Cole, the cast of Gossip Girl and Rihanna.
21:00
00:00 Show/Game Show
Schedule
◄ Now
Pr. Change
Tyra
2 TV2
28 Sep. 2008 21:00~00:00
Close
Remind
Record
MPEG
87
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Switch on/off EPG
Select a programme
1
Switch on or off EPG.
or
1
Select desired programme.
Button Function in NOW/NEXT Guide Mode
You can view a program being broadcasted and one scheduled to follow.
RED
Change EPG mode.
YELLOW
Enter Manual Timer mode.
BLUE
Enter Schedule List mode.
When ‘Now’ is selected, it is moved to
selected program and EPG disappears
When ‘Next’ is selected, a reservation
pop-up window appears.
Select NOW or NEXT Programme.
Select the Broadcast Programme.
Page Up/Down.
or or
Switch off EPG.
Select DTV or RADIO Programme.
Detail information on or off
Programme Guide
ALL
NOW
NEXT
1 YLE TV1
Keno
World Business
2 YLE TV2
4 TV..
Your World Today
Fantomen
Legenen om Den....
Kritiskt
Naturtimmen
ABC
Lyssna
Tänään otsikoissa
Glamour
5 YLE FST
6 CNN
8 YLE24
That ’70s show
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
25 Nov. 2008 10:05
RADIOWatch/Schedule
TV/RAD
Favourite
FAV
Manual Timer Schedule List
i Information
INFO
Mode
That ’70s show
89
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Date Change Mode
Programme Guide
1 YLE TV1
2 YLE TV2
4 TV..
5 YLE FST
6 CNN
8 YLE24
Kungskonsumente
Mint Extra
The Drum
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
... ... ... ... Tänään otsikoissa
ALL
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
25 Nov. 2008 10:05
That ’70s show
Tue. 25 Nov.
14:00 15:00
Antigues Roadshow
Button Function in Extended Description Box
The detail information on or off.
Text Up/Down.
Select Timer Record/Remind setting mode.
or
Switch off EPG.
DTV 1 YLE TV1 25
25 Nov. 2008 10:05
Fia World Touring Car Chanpionship
Tue. 25 Nov. 2008 10:05 12:40
Fia Champion
Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's
Haunted house/Cry of The Swamp; Miss Gotto's Haunted
house/Cry of The Swamp; Miss Gotto's Haunted house/Cry
of The Swamp; Miss Gotto's Haunted house/Cry of The
Swamp; Miss Gotto's Haunted house/Cry of The Swamp;
Remind Record Close
Date Change
Date Exit
or or
Switch off Date setting
mode.
Change to the selected date.
Select a date.
or
Switch off EPG.
GREEN
90
EPG (ELECTRONIC PROGRAMME GUIDE)
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Record/Remind Setting Mode
Sets a start or end time for recording, and sets only a start time for the reminder with the end time
grayed out.
This function is available only when recording equipment that use pin8 recording signalling has been
connected to the TV-OUT(AV1) terminal, using a SCART cable.
Recording function is only supported in the Digital mode and not in the Analogue mode.
Switch off Manual Timer mode.
Select Remind or Record function setting.
Select Type, Start Time, End time or
Programme.
YELLOW
Change to Guide mode.
BLUE
Change to Schedule List mode.
Save Timer Record/Remind.
Manual Timer
ExitMove
Programme Guide Schedule List
OK
Wed. 12 Aug. 2009 13:46
Select the date to schedule.
Sun.
09 10 11
Mon. Tue. Wed. Thu. Fri. Sat.
12 13 14 15
22
29
05
21
28
04
20
27
03
19
26
02
18
25
01
17
24
31
16
23
30
Wed. 12 Aug. 2009
No schedule list
OK
Prev.
Select a schedule type
Start TimeType
17 : 30
DTV 801 ANTV D...
End Time Programme
15 : 09Record
Close
107
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each programme.
If sound quality or volume is not at the level you want, it is recommended to use a separate home the-
ater system or amp to cope with different user environments.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select AUDIO.
2
Select Auto Volume.
3
Select On or Off.
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Auto Volume : Off
OK
Move
Auto Volume : Off
Clear Voice II : Off 3
Balance 0
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
AUDIO
L R
Auto Volume : Off
MHEG
On
Off
112
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational
even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
NOTE
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automati-
cally switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the
TV speaker.
Some menus in AUDIO are disabled when TV Speaker is set to Off.
1
Select AUDIO.
2
Select TV Speaker.
3
Select On or Off.
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
TV Speaker : On
OK
Move
Sound Mode : Standard
• Infinite Sound : Off
• Treble 50
• Bass 50
Reset
Digital Audio Out : PCM
TV Speaker : On
DTV Audio Setting : Auto
AUDIO
TV Speaker : On
Off
PCM
On
116
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describing the current situation in a TV
programme in addition to the basic audio.
When Audio Description On is selected, basic audio and Audio Description are provided only for those
programmes that have Audio Description included.
Volume Changes the Audio Description volume
Beep Beeps when a programme with Audio Description information is selected
Adjustment for Audio Description Volume With selecting On
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
1
Select OPTION.
2
Select Disability Assistance.
3
Select Audio Description.
4
Select Volume or Beep.
5
Make desired adjustment.
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Disability Assistance
OK
Move
Language(Language)
Country : UK
Disability Assistance
Power Indicator
Factory Reset
Set ID : 1
Mode Setting : Home Use
OPTION
Disability Assistance
Close
• Volume 0
Hard of Hearing(
)
• Beep
Off
Off
- +
Audio Description
On
153
APPENDIX
12. Remote control lock mode (Command: k m)
To lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Ack
Data 00 : Lock off 01 : Lock on
* If you are not using the remote control, use this
mode.
When main power is on/off, external control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
[m][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when con-
trolling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Ack
Data 00 : OSD off 01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
Data Red : 00 to Green : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][j][ ][Set ID][ ][Data][Cr]
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
10. Sharpness (Command: k k)
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][k][ ][Set ID][ ][Data][Cr]
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
15. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][t][ ][Set ID][ ][Data][Cr]
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
14.
Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][s][ ][Set ID][ ][Data][Cr]
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[x][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
13. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64
*
Refer to ‘Real data mapping 1’. See page 154.
[k][r][ ][Set ID][ ][Data][Cr]
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw LG 37LE5310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van LG 37LE5310 in de taal/talen: Engels als bijlage per email.

De handleiding is 23,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van LG 37LE5310

LG 37LE5310 Gebruiksaanwijzing - Nederlands - 155 pagina's

LG 37LE5310 Gebruiksaanwijzing - Deutsch - 206 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info