Handleiding Kyocera KM6230 (pagina 16 van 167) (Engels)

17490

Verklein

Vergroot

Pagina terug

1/167

Pagina verder

Section 2 NAMES OF PARTS

2A080030A

KM-6230 (KME)

/ 131

(2) Operation panel

1 Punch key / Punch mode indicators

(In order to punch holes in your copies with the optional Finisher, press

this key until the appropriate indicator [for either 2- or 3-hole punch] is

lit. See page 9-1.)

2 Staple Sort key / Staple Sort mode indicators

(In order to staple your copies with the optional Finisher, press this key

until the indicator that corresponds to the desired stapling style is lit.

See page 9-1.)

3 Sort-Group key / Sort and Group indicators

(In order to sort or group your copies, press this key until the indicator

that corresponds to the desired mode is lit. See pages 9-1 and 9-10.)

4 Brightness adjustment control dial

(Turn this dial when you want to adjust the brightness of the touch

panel [liquid crystal display].)

5 Job Build key

(Press this key when you want to access the job build functions of this

copier. See page 6-3.)

6 Doc. Mgmt. key

(Press this key when you want to access the document management

functions of this copier. See page 7-1.)

7 Program key

(Press this key when you want to register various copy settings as a

single program. See page 5-27.)

8 Copier/Printer/Scanner key

(Press this key when you want to use the optional printer or scanner

functions of this machine.)

9 Manual key and indicator

(Press this key to light the indicator when, rather than using the auto

paper selection mode or the auto magnification selection mode, you

want to manually select the size of the copy paper or the copy magni-

fication ratio.)

0 Add Job key and indicator

(Press this key to light the indicator when you want to access the job

reservation functions of this copier.)

! Touch panel

(Displays such information as the number of copies, machine status,

operation procedures, etc. By gently touching the displayed keys, you

can select a desired item, setting, function, etc. Do not press on the

touch panel with wooden, metal or other hard objects, and do not prick

it with pointed objects. In this handbook, touch keys are indicated in

double quotation marks.)

@ Numeric keys

(Press these keys when you want to set the number of copies to be

made or to enter a desired value.)

# Reset key (See “● Initial mode” at right.)

$ Stop/Clear key

(Press this key when you want to stop copying or want to change the

number of copies to be made.)

% Start key and indicator

(Press this key when the indicator is lit green in order to start copying.)

^ Proof Copy key and indicator

(Press this key to light the indicator when you want to make a test

copy. See page 4-8.)

& Energy Saver key and indicator

(Press this key to light the indicator when you want to use the energy-

saving auto preheat function. See page 4-10.)

* Interrupt key and indicator

(Press this key to light the indicator when you want to use the interrupt

copying function. See page 4-7.)

( Data / Error indicator

(This indicator will blink and then light continuously during reception of

data from your computer. It will blink and then light red when an error

has occurred during data verification, etc.)

● Initial mode (at the end of warm-up or when the Reset key is pressed)

In the initial mode, the copying mode is automatically set to the “auto

paper selection mode” where copying is accomplished at 100% magni-

fication (same size) onto paper of the same size as the original, the

number of copies to be made is set to “1”, and the copy exposure is set

to the “manual exposure mode”.

* It is possible to change the default setting in the initial mode to the

“auto exposure mode”. (See “1 Exposure mode” on page 8-15.)

* It is also possible to change the default setting so that you can manu-

ally select the size of paper that you will copy onto. (See “8 Paper

selection” on page 8-16.)

● Auto clear function

About 90 seconds after copying stops, the copier will automatically

return to the same settings as those after warm up. (However, the copy

exposure mode will not change.) Copying can be performed repeatedly

with the same copy mode, number of copies, and exposure settings as

long as copying is started before the auto clear function engages.

● Automatic drawer switching function

If two drawers contain the same size of paper and one of the drawers

runs out of paper during copying, this function will automatically switch

to feeding paper from the other drawer.

* The automatic drawer switching function can be deactivated.

(See “2 Automatic drawer switching” on page 8-11.)

2-3

E_Sec2_Name.PM6 10/13/00, 13:364

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Kyocera KM6230 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info