20433
27
Verklein
Vergroot
Pagina terug
1/143
Pagina verder
Chapter 3 Using the Operator Panel
3-11
Items and values on the status page may vary depending on the
printer’s firmware version.
1 Software Version
This information shows the firmware version and date of is-
sue of the printer.
2 Hardware Information
This information shows various printer settings, such as the
size and type of the paper in the paper cassettes.
3 Memory
This shows the amount of total memory installed in the print-
er, the amount of currently available memory, and the current
status of the RAM disk. See Setting RAM Disk Size on
page 3-34.
4 Page Information
This shows the print resolution, number of copies, and the to-
tal page count.
5 Installed Options
This shows the option(s) installed in the printer.
6 Network Status
This shows the IP address, Subnet Mask address, and De-
fault Gateway address for the network interface.
7 Emulation
This shows all available emulations of the printer. The printer
is shipped from the factory with PCL 6 emulation selected as
the default.
8 Error Log
This shows the last three instances of the following four
types of errors, listing them in the order of their occurrence:
KPDL Error Press GO; Memory overflow Press GO;
Print overrun Press GO; File not found Press
GO. The most recent error is displayed on the top line of the
Error Log. For error remedies, see Maintenance Messages
on page 4-4. Error information is cleared when the printer’s
power is turned off.
9 Toner Gauge
This shows the approximate level of remaining toner. When
the value is 100, the toner container is full.
0 Interface Information
This information shows the default font and the default emu-
lation for all interfaces installed in the printer.
A KIR Test Pattern
KIR is the Kyocera’s original smoothing function. This test
pattern shows the effect of the KIR (Kyocera Image Refine-
ment) system.
2.2.3 e-MPS
e-MPS is an abbreviation for ‘enhanced-Multiple Printing Sys-
tem’ which implements the following functions that are available
from the printer driver:
Job Retention
Job Storage
In either job mode, when printing a document, the print data is
transferred from the computer to the printer then stored on the
printer’s hard disk. Since copies of the document are printed us-
ing the stored data, printing is performed faster with less compu-
ter spooling time and less network traffic.
To use the e-MPS system, an optional hard disk must be in-
stalled in the printer. For details, see Appendix D Option
Units.
Q
QQ
Q Job Retention
Job Retention has four modes as summarized below. These
modes are selected when you choose on the printer driver
through the application software:
*Jobs in excess will cause the earlier ones to be deleted.
NOTE
NOTE
Quick Copy Proof-and-Hold
Primary function To later print addi-
tional copies
To proof the first
copy before printing
multiple copies
Storing started Printer driver Printer driver
Retrieved by Operator panel Operator panel
Default number of
copies printed at re-
trieval
Same as storing One less
Maximum number
of jobs stored*
32,expandable to
50
32,expandable to
50
PIN security No No
Data after printing Retained Retained
Data when power
off
Deleted Deleted
Private Print Stored Job
Primary function To hold the docu-
ment in printer to
prevent unauthor-
ized access
To electronically
store documents
such as fax cover
pages
Storing started Printer driver Printer driver
Retrieved by Operator panel Operator panel
Default number of
copies printed at re-
trieval
Same as storing One
Maximum number
of jobs stored*
Private jobs are de-
leted automatically
once it is retrieved.
Depends on the
hard disk capacity
PIN security Yes Yes (Option)
Data after printing Deleted Retained
Data when power
off
Deleted Retained
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kyocera FS9500DN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kyocera FS9500DN in de taal/talen: Engels als bijlage per email.

De handleiding is 5,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info