BATTERY AND CHARGING THE BATTERY
27
Release the lever and allow the scooter to come to a
complete stop. Use your left index and middle fingers to
pull the left side of the lever to move backwards.
= driving backwards
Do not pull both sides of the throttle control lever
simultaneously.
8.4 OVERLOAD PROTECTION
The overload protection switches the power off when the
motor becomes overloaded while trying to climb
over too high an obstacle, such as a curb or
trying to climb too steep of an incline.
If the motor is overloaded, the following happens:
• The scooter becomes noticeably slower and then stops
• The control system shuts down the scooter
To rectify this:
Switch the scooter off and allow it to cool down for a
few minutes.
8.5 SWITCHING ON THE FRONT/REAR
POSITION LIGHT
Front /Rear
Position light button:!
Switch on = press button once
Switch off = press button again
A switch indicator will light up to
show that the Front /Rear Position
light are switched on.
If you drive with the Front /Rear Position light on,
the batteries will drain faster and the
scooter driving range will be slightly
reduced.
8.6 SWITCHING ON THE
HORN
Press the horn button.
It will sound for as long as you hold the button down.
