PUSHING AND TRANSPORTING THE SCOOTER
18
6. PUSHING AND TRANSPORTING
THE SCOOTER
1. Please carefully read the safety information in
section 3 related to transportation first.
2. Pushing the scooter:
In order to push the scooter, you must place the scooter
in “freewheel” mode, which disengages the drive
motor.
The lever is located at the bottom right-hand side of the
scooter under the seat.
WARNING!
When the lever is pulled forward in freewheel
mode:
• The scooter must be on a flat surface and remain
stationary.
• Do not sit on the scooter.
6.1 To push the scooter:
= Freewheel Mode:
(Motor is disengaged.)
1. Power off the scooter and
remove the key.
2. Pull the lever forward
(Vehicle direction).
3. Pull the scooter to your
desired location.
4. Pull the lever backward
(Vehicle direction).
=Driving
Mode(B):(Motor is engaged.)
1. Always switch the
scooter off to push it.
2. Do not push the scooter too fast. If a pre-set speed is
exceeded while you are pushing the scooter, the drive
motor will switch on automatically and slow the scooter.
