44
Installation instructions for fitter
• Statutory regulations and the connection specifications issued by the local power
supply company must be strictly observed.
• When installing the appliance, carrying out repair work, or replacing the light
bulb, always disconnect the appliance from the mains. Unplug the appliance or
disconnect fuse.
• Ensure that all live connections are safely insulated when installing the oven.
• The appliance is supplied ready to plug in. It should be connected only to a
properly protected wall socket. Installing and wiring a socket or replacing the con-
nection cable should only be performed by an electrician and in observance of
the relevant regulations.
• If the socket is inaccessible after the installation, safety regulations require that an
all-pole isolator with a contact opening of at least 3 mm be used on the installation
side.
• Built-in kitchen fixtures must be temperature resistant to 100 °C. This applies
particularly to veneers, plastic coatings, adhesives, paint and varnishes. Adjacent
cabinetry front must be temperature resistant to at least 70 °C).
• Make sure that the appliance is installed perfectly horizontally on a firm, level
base. The base must be perfectly rigid.
• The kitchen unit must be fixed to the wall, using an angle bracket if required.
Electrics
Connection standard mains plug into a wall socket.
Total rating 2.2 kW,
Electrical connection 230 V, 50 Hz
Fuse rating 10 A