693399
50
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
rev. 0/2018
lares 4.0 PROGRAMMING MANUAL
50
Type: Remote control
The subtypes available are:
• Switch-off pressing: sends a message by pressing the off button on the remote control (short press).
• Partial button pressing: sends a message by pressing the partial key on the remote control (short press).
• Pressing the Total button: runs the scenario by pressing the Total button on the remote control (short pressing).
• Long pressing of the off button: sends a message by pressing the off button on the remote control (long press).
• Partial button long pressing: sends a message by pressing the partial button on the remote control (long press).
• Total button long pressing: sends a message by pressing the total button on the remote control (long press).
• Long pressing of the "
i" button: sends a message by pressing the (i) button on the remote control (long press).
Type: Key ID
The subtypes available are:
• Code recognized: sends a message when a code is recognized. Valid option for codes entered on the keypad or APP.
• Key recognized: sends a message when a "Key" is enabled on the reader (on keypad or flight/flight-IN).
Type: Motherboard
The subtypes available are:
• Tamper: sends a message when there is a tamper condition of the metal box of the control panel (opening and / or
detachment from the wall) detected by means of the switches connected to the connector "t" of the "lares 4.0" card.
• Tamper reset: sends a message when the tamper condition of the control panel box is reset.
• Start of maintenance: sends a message when a new configuration is applied.
• End of maintenance: sends a message when the programming of parameters, through portal or installer APP, is
completed
• Periodic test: sends a message based on the scheduled periodic event (test event)
• Wrong code: sends a message after three incorrect codes are entered on the keypad. After four incorrect codes the
keypad is blocked for (90s.).
• Installer PIN recognized: sends a message when the installer code is recognized.
• Control panel off: sends a message when a switch-off event of the controlled system occurs (the 230V power supply is
missing and the battery is discharged). In this case we should preserve the battery from total discharge.
• Control panel reset: sends a message when the control panel is restarted because it has been removed and then the
power is restored or due to a system failure or a firmware update.
• Ethernet network failure: sends a message when the Ethernet cable is disconnected (or when the router/switch is
turned off).
• Ethernet network reset: sends a message when the Ethernet cable is reconnected (or when the router/switch is turned
on).
• PSTN network failure: sends a message when the telephone line is removed from the PSTN module (cable cut or line
fault).
• PSTN network restore: sends a message when the telephone line on the PSTN module is restored.
• GSM network failure: sends a message when the GSM network is missing (no signal, GSM repeater malfunctioned or
switched off for maintenance, SIM disabled and no longer registered on the network of the mobile operator).
• GSM network reset: sends a message when the GSM network is restored.
• Failed superv. IP receiver: sends a message when it fails to send supervision from the IP receiver.
• IP receiver reset: sends a message when the IP receiver responds to the supervision packets.
• Wireless jamming: sends a message when the control panel's wireless receiver or one of the "duo" transceivers detects
a disturbance on the 868MHz frequency.
• Wireless jamming restored: sends a message when the disturbance on the 868Mhz frequency, detected by the wireless
receiver of the control panel or one of the "duo" transceivers, ceases to exist.
50

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ksenia-Lares-4.0

Zoeken resetten

  • Waarom kan er geen Nederlandse handleiding worden verstuurd ?
    Ik had die heel graag ontvangen om wegwijs te geraken met het systeem.
    Gr Gesteld op 26-9-2020 om 15:06

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ksenia Lares 4.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ksenia Lares 4.0 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info