693399
43
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
lares 4.0 PROGRAMMING MANUAL
43
rev. 0/2018
• Forced to self-exclude: if the system is not ready, it is inserted with forced exclusion of any open areas.
Note: if there is an open area with the "non-excludable" attribute, at the time of arming mode, this zone will not be
excluded and an alarm will be generated.
Zones with the "exclusion" and "self-exclusion" attributes, if open during arming mode, will be excluded and will not
generate alarms even if they return to rest: they will be reincluded when they are switched off.
Zones with the "with reinclusion" attribute, if opened during arming mode, will be excluded and will not generate
alarms. If they go back they will be reincluded and will, therefore, be ready to generate an alarm.
Type: Output
The subtypes available are:
• Enable user: the user's account (including the code, key or remote control), if inactive, is now activated.
• Disable user: the user's account (including the code, key or remote control) is deactivated.
Type: Other
The subtypes available are:
• Clear telephone queue: cancel calls in progress.
• Alarm reset: all outputs associated with an alarm or tamper event are stopped.
This page links events (alarm, tamper, etc.) with various scenarios.
In order to configure the “Events”, i.e. the execution of the programmed scenarios (arming modes, activation of outputs,
etc.)
in the appropriate section, click on the (
) icon and then on the ( ) symbol. Then enter the various parameters:
• Type: identifies the group that generates an event (e.g. zone, partition, output, etc.).
• Subtype: this is the action related to the previous parameter (e.g. Type: Zone Subtype: zone alarm). You can make a
multiple choice with up to 15 items.
After entering the previously described two parameters, click on ( ).
At this point it is necessary to set two other parameters:
• Entity: the zone, the partition, the device, the user etc. that generates the event.
• Scenario: enter the previously programmed scenario, which will be activated when the event generated by the selected
entity occurs.
The notification types are listed below the <“Subtypes”.
Type: Zone
The subtypes available are:
• Alarm: executes the scenario when the zone generates an alarm.
• Restore: runs the scenario when the zone is restored after an alarm.
• Tamper: runs the scenario when the zone generates a tamper alarm.
• Tamper restore: runs the scenario when a tamper is restored.
• Exclusion: runs the scenario when the zone is excluded.
• Inclusion: runs the scenario when the zone is included.
• Masking: runs the scenario when the detector generates a masking alarm.
• Masking restore: runs the scenario when the detector's masking condition is restored.
• Real Time - Alarm: runs the scenario when the zone is alarmed, even with the partition switched off.
• Real time – Restoration: runs the scenario when the previous condition is restored.
Events
43

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ksenia-Lares-4.0

Zoeken resetten

  • Waarom kan er geen Nederlandse handleiding worden verstuurd ?
    Ik had die heel graag ontvangen om wegwijs te geraken met het systeem.
    Gr Gesteld op 26-9-2020 om 15:06

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ksenia Lares 4.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ksenia Lares 4.0 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info