693399
25
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
lares 4.0 PROGRAMMING MANUAL
25
rev. 0/2018
Wireless devices
The wireless devices are grouped by type, and then separately identified in order to properly manage the smallest
differences between them.
To program the Wireless devices, click on the icon (
) and then on the symbol ( ). Then select the device you
require by clicking on the (
) symbols and then type the serial number on the peripheral label.
To add another device belonging to the same section (e.g. wireless sensors, wireless I/O modules, etc.), click again on the
symbol (
). Otherwise, to end the session, click on ( ).
In some wireless devices, it is required to program the monitoring time.
The monitoring interval represents the maximum time that elapses between two transmissions by the same wireless
device even if there have not been any status changes such as, for example, an alarm.
These periodic communications are used by the control panel to verify the persistence of the radio link with all wireless
devices. The higher this value is, later the control panel will perceive the loss of the radio link with the wireless devices.
On the other hand, programming a very low value can shorten the battery life due to more frequent transmission by
the devices. Depending on the programmed value, the behaviour of the control panel in the generation of the messages
concerning the radio communication fault or tampering varies as described below.
If the wireless devices are programmed with a monitoring interval equal to 1 minute, the control panel generates a
'wireless fault' and the 'loss of wireless device' event if it does not receive any transmission in a 100-second interval.
If all wireless devices are programmed with a monitoring interval of more than 1 minute, the "loss of wireless device"
event is generated in case the control panel does not receive any transmission from the single device for a period equal to
the greater one of 2 hours and the double of the interval if the monitoring is programmed for the device.
The control panel does not check the integrity of the radio link for devices that have a monitoring interval programmed
to 0. We recommend using this programming only for devices used in home automation applications and not for security
applications.
Wireless siren
imago WLS
The parameters available for imago sirens are:
• Description: the name given to the device (e.g. WLS outdoor siren, etc.)
• Serial number: this is the code which identifies the peripheral. Simply update the serial number to acquire the new
peripheral and to keep any previously saved settings if the device is being replaced.
• Supervision: maximum time between two consecutive transmissions.
• Maximum alarm time: maximum time to the activation of the audible and luminous signal of the siren.
When the maximum time expires, the siren will stop even if it does not receive the reset command from the control
panel.
• Temperature sensor: If this option is disabled, the siren does not send the temperature to the control panel and the
external temperature will not be displayed on the keypad (this is useful if there are two sirens, and one is installed in a
position exposed to the sun, leading to false outdoor temperature measurement).
Note: if this option "Temperature sensor" is enabled on the siren but the display on the keypad is disabled (see the
opt. display outside temperature), the temperature will not be shown.
• Bi-tonal buzzer: If this option is selected, the audible signal is made through a sound with two distinct frequencies; if it
is not selected, the "sweep" mode is performed in frequency.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ksenia-Lares-4.0

Zoeken resetten

  • Waarom kan er geen Nederlandse handleiding worden verstuurd ?
    Ik had die heel graag ontvangen om wegwijs te geraken met het systeem.
    Gr Gesteld op 26-9-2020 om 15:06

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ksenia Lares 4.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ksenia Lares 4.0 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info