4374
18
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
18
. FROTHING MILK FOR A CAPPUCCINO
When preparing an espresso, this machine
can be used to produce frothy milk to prepare
a cappuccino.
For best results, use the cappuccino accessory.
Please note: The cappuccino accessory
must only be used for producing frothy
milk.
Fit the accessory to the end of the steam
nozzle (17).
Pour about 200 ml of skimmed milk into a
small high-sided container (maximum
capacity 0.5 L) which will fit beneath the
steam nozzle.
The milk must be nice and fresh, and the
container must also be chilled, so do not rinse
it in hot water beforehand.
• Check that the boiler is full of water.
The pump switch must be in position
(18).
When the yellow temperature indicator light
goes out:
• Place a container under the steam nozzle
and turn the steam tap to max position.
Let the water flow until steam appears, then
turn the tap back to position O.
You can now start to prepare frothy milk.
• Place a container under the steam nozzle in
such a way that it is completely immersed in
the milk.
• Turn the tap slowly to max position and
hold the container steady during the
operation (19).
The nozzle must not touch the bottom of the
container so as not to prevent the steam
escaping.
• Once you have obtained the froth, reset the
tap to position O and remove the container.
• Then set the tap to steam position again for
a few moments (with an empty container
under the nozzle) to eliminate the residue of
milk in the nozzle.
• Once this operation is finished, clean the
cappuccino accessory and the steam nozzle
with a damp cloth.
. HEATING OTHER LIQUIDS
• Take out the steam nozzle.
Remove the cappuccino accessory.
• Make sure the boiler is full of water.
Set the pump switch to position
.
• Switch on the appliance.
A little water and steam will escape from the
percolation head while the appliance is
heating up.
When the yellow temperature indicator light
goes out, place a container under the steam
nozzle and turn the steam tap to max
position.
Let the water flow until steam appears, then
turn the tap back to position O.
• Place the container under the steam nozzle
in such a way that the jet is immersed in the
liquid.
• Turn the tap slowly to max position.
• Once the liquid is hot enough, reset the tap
to position O and remove the container
from the nozzle.
Note :
If you wish to prepare an espresso
immediately after using steam, it is vital that
you allow the appliance to cool down to the
«coffee making» temperature :
• Place a container under the filter holder and
set the pump switch to the « » position.
• Let the water run through until the yellow
temperature indicator light goes out.
Reset the pump switch to position
, after
which you may prepare an espresso in the
usual way.
Cleaning
• Before doing any cleaning, unplug the
appliance and allow it to cool down.
• Wipe the body of the appliance with a
damp cloth.
The water tank must be emptied after use.
• Remove the cup rest grid and clean it (20).
• Empty the drip tray and clean it.
ART. 880.PM6.5 19/01/04, 16:0118
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Krups VIVO F 880 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Krups VIVO F 880 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Krups VIVO F 880

Krups VIVO F 880 Gebruiksaanwijzing - Nederlands - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info