712621
111
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
104
ENGLISH
PROBLEMS CAUSES SOLUTIONS
Leak through the bowl
spindle or by the XL bottom
accessory.
The bowl seal is not correctly
positioned.
Position the seal correctly.
The bowl seal is damaged. Contact an approved service centre.
The locking ring (D6) is not locked
correctly.
Lock the ring correctly (D6).
The blades do not rotate
easily.
Pieces of food that are too big or too
hard are blocking it from rotating.
Reduce the size or quantity of the ingredients
processed. Add some liquid.
Smell from motor.
On using the appliance for the rst
time, or in the event of overload of the
motor caused by too large a quantity
of ingredients or by pieces that are too
hard or too big.
Allow the motor to cool down (about 30
minutes) and reduce the number of ingredients
in the bowl.
“STOP” is displayed.
The appliance has detected too many
vibrations and has changed to the
safety mode.
Check that you are using the right speed
and that you are using the recommended
accessory.
“SECU” is displayed.
Motor overload caused by too many
ingredients or pieces which are too
hard or too large or overuse without
sufcient cooling down time.
Allow the motor to cool down (about 30
minutes) and reduce the number of ingredients
in the bowl.
“SECU” is displayed + red
indicator light is ashing.
Overheating of temperature sensors. Contact an approved service centre.
“Err1” is displayed.
+ red indicator light is
ashing.
The heating element is not working.
Check that the power pins under the bowl are
not clogged with food. If this is the case, clean
them and try again.
If that still does not work, contact an
approved service centre.
“Err2” is displayed. Electronic fault. Contact an approved service centre.
“Err3” is displayed. Speed fault. Contact an approved service centre.
“Err4” is displayed.
Communication fault with chopper
electronic card.
Contact an approved service centre.
Displays «Err8» Default security sensor lock. Contact an approved service centre.
“ntc1” is displayed.
+ red indicator light is
ashing.
Temperature sensor 1 is no longer
working.
Contact an approved service centre.
“ntc2” is displayed.
+ red indicator light is
ashing.
Temperature sensor 2 is no longer
working.
Contact an approved service centre.
Safety indicator display (C4)
Improper locking of the bowl or lid
Prior to operating the appliance, check that the
bowl is properly locked on the motor unit and
that the lid is properly locked on the bowl. If the
problem persists, contact an authorised centre.
The lid is locked on the bowl in the
“cooking without a lid” mode
Unlock the lid prior to launching the cooking
program. If the problem persists, contact an
authorised centre.
The safety lock on the
lid remained active (rod
extended) and prevents the
lid from locking.
The appliance was turned off as a
recipe was in progress by toggling the
I/O switch to the “O” position or was
simply unplugged as a recipe was in
progress.
Simply toggle the I/O switch to the “I” position
to reset the food processor, along with the
safety lock on the lid; the rod will automatically
return to its original position. You may now lock
the lid.
Connection problem See the app guide
Is your appliance still not working?
Contact an approved service centre (see list in service booklet).
111

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Krups HP60A - i Prep and Cook XL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Krups HP60A - i Prep and Cook XL in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 27,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info