813987
32
Verklein
Vergroot
Pagina terug
1/206
Pagina verder
32
START-UP
Before using the device for the rst time, make sure that all the connections to the individual system
components have been made in accordance with the instructions in the manual. Incorrect connection
of the gas control system can result in its damage.
For the rst few starts, a specic smell can be detected, lasting up to several hours after use. This phe-
nomenon is related to the burning of paint. Animals may be particularly susceptible to the odours
generated during the paint burning. To speed up this process, it is recommended to warm up the
device to a maximum ame size for several hours.
INSTALLING THE GAS CONTROL SYSTEM
CAUTION!!!
This device and the gas control system can only be installed on factory settings. In the model con-
trolled by the remote control, do not install batteries in the receiver at this stage. Earlier connection
to the power source may damage the electronics of the system.
CAUTION!!!
The components of the gas control system should be installed in accordance with the instructions
in this manual.
Standard gas control system includes, depending on the option: the MertikMaxitrol GV32 or GV60
controller and the B6R-R8U receiver, in which the installed antenna enables wireless remote control.
System components should be installed in their designated areas. Changing their location may expose
the device to damage due to harmful temperatures or ooding.
The device can only work with the automation provided with the device. Connections of individual
components of the system have been made in such a way as to prevent them from being connected
improperly.
The remote control should not be more than 6-8 meters away from the device, in this instance,
after several hours (3-4 hours), the device will shut down automatically.
Connect the reducer to the cylinder making sure that the gaskets are in place (see the diagram above).
If the gaskets are shrivelled or damaged or if any of them are missing, the device cannot be used until
the gaskets are replaced. The valve must always remain/stay in a vertical position after each connec-
tion to the cylinder and throughout the lifetime of the device. Connecting the valve in a dierent
position results in cutting o the gas supply to the device and thus shutting down the device.
CAUTION!!!
The anti-tilt valve is a safety device against overturning of the device, so that when the device over-
turns, the valve automatically cuts o the gas supply to the controller and this extinguishes the ame.
Fig. 8.
CAUTION!!!
The connection to the gas source should only be made when the heater is o and the cylinder valve
is closed.
CAUTION!!!
It is forbidden to use open re during the process of installing or connecting the cylinder. Failure to
comply with the above may result in re, explosion and property damage, personal injury, or even
death.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kratki PATIO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kratki PATIO in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools, Fins als bijlage per email.

De handleiding is 4.06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info