17
13. What if there are problems?
If the scale detects and error when measuring, the following is displayed.
Display Cause Remedy
Ol
The maximum load capacity of 180kg
was exceeded.
Do not load the unit with over 180kg.
L0
The batteries are almost empty. Replace the batteries.
eRR
The electrical resistance between the
electrodes and the sole of your foot is
too high (e.g. if you have tough calluses).
Repeat the measurement barefoot. If
necessary, moisten the soles of your feet
slightly. If necessary, remove the cal-
luses from the soles of your feet.
The fat percentage is outside the meas-
urable range (less than 5% or greater
than 55%).
Repeat the measurement barefoot or, if
necessary, moisten the soles of your feet
slightly.
No measurement possible
Possible errors Remedy
The scale was not activated before you stood on
it. If you step on the scale before “
0.0
kg” is dis-
played, the scale will not work correctly.
Activate the scale correctly (wait for “
0.0
kg”) and
repeat the measurement.
The batteries in the scale are empty. Replace the batteries.
Incorrect weight measurement
Possible errors Remedy
Scale is on carpeting. Place the scale on a level and solid surface.
Incorrect zero point of scale. Activate the scale,
wait approximately 4 seconds,
repeat measurement.
