Instruction Manual
Attention: The boiling process is not stopped by only removing
the unit from the power base. The unit must be switched off
properly. Otherwise, once put back onto the base the unit will
in the next boiling cycle. However, always make sure that the
water level is not too low.
Always unplug the appliance after use.
Dry-boil cut-out
off the kettle automatically, should it accidentally be operated
without water or by not observing the minimum water level.
Afterwards, your kettle is ready for use again.
Cleaning and Care
Before cleaning, always switch off the appliance and disconnect
it from the mains. Let it completely cool down. Never immerse
the appliance in water. Danger! Electric Shock!
Clean the body of the appliance with a moistened soft cloth.
objects to clean the appliance.
water, if necessary, with a soft nylon brush. Dry it afterwards
DESCALING