707348
111
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
Convenient functions for playback and recording Loop playback
105
2. Press the AUDIO REC (play/pause) button to
start playback. (AUDIO REC (play/pause)
button: lit green)
3. Slightly earlier than the point where you want to start
overdubbing, press the MENU (Rec Control )
button to enter the record-standby condition.
(AUDIO REC (play/pause) button: blinking
orange)
4. Sing the chorus part. Recording will start
automatically in response to the input.
When you overdub using this method, the audio input from
0.2 seconds earlier than the moment you started recording
will actually be recorded. This lets you overdub without
losing the beginning of the chorus or guitar phrase.
Tip: This Auto (Auto Rec Start) setting can be stored in the
GLOBAL> PREF 2 page as the default setting.
Loop playback
There’s a loop playback function that lets you repeatedly
play a specified region (A–B) of an audio song.
Note: The loop play on/off setting and the specified time are
saved individually for each audio song.
This setting will be saved to the SD card when you
switch to a different audio song or when you turn off the
power. If you remove the SD card immediately after
select the setting, the setting will not be saved.
Using loop play
If you add a check mark to LOOP to turn it on, the playback
will loop.
To specify the loop region, set the point where looping will
start (point A) and end (point B).
Note: The interval between points A and B will be at least
three seconds.
It’s not possible to record while LOOP has a check
mark. Nor is it possible to add a check mark to LOOP
during recording.
Setting the current time location as a point
There’s a convenient function that lets you directly specify
the current time location as one of the points. Move the cursor
to A or B, and press the ENTER button during playback; the
current time location will be specified as a point.
Note: If you use this method to specify the time location of a
point, the location will be specified with an accuracy of
within one second.
Pad audio play
You can assign a recorded audio song to a pad and play it
back. ( p.109)
Importing or exporting WAVE files
Importing
You can import a WAVE file into the audio recorder, and
play it or overdub onto it.
The following files can be imported.
File format: WAVE format uncompressed linear PCM
Sample bit depth: 16-bit
Sampling frequency: 44.1 kHz or 48 kHz, stereo files
Number of characters in file name: The first eight characters
are shown
Note: Since 44.1 kHz WAVE files will be converted into 48
kHz as they are imported into the KROSS, a small amount of
time may be required.
Import procedure
1. Using your computer, copy the WAVE file that you
want to import into the KORG/KROSS2/DATA folder
of an SD card that was formatted by the KROSS.
2. In the audio recorder setup screen, open the audio
song list.
3. The WAVE file that you saved on the SD card in step 1
is shown at the bottom; select the WAVE file that you
want to import, and press ENTER to access the dialog
box.
Note: As an alternative to steps 2 and 3, you can open the
same dialog box by using the MEDIA>FILE page to
select the WAVE file that you want to import, and then
executing the Load Selected function.
4. If you want to rename the song, access the text dialog
box and enter a name.
5. If the volume of the file you’re importing should be
adjusted beforehand, specify Level Adjust.
Note: After importing, you can adjust the playback
volume of the audio recorder, or apply an individual
volume adjustment to each audio song. (see “Adjusting
the volume” on page 106)
6. Press the MENU (OK) button to execute the import
function.
The selected WAVE file will be loaded in KROSS audio
song format. The progress of execution is shown by a
progress bar in the display.
Note: This may take some time depending on the type of
file, etc.
During the import procedure, you can cancel by pressing
the FUNCTION (ABORT) button.
7. In the audio recorder setup window, select the song
that you imported, and play it.
111

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg Kross 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg Kross 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Korg Kross 2

Korg Kross 2 Gebruiksaanwijzing - Deutsch - 152 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info