707348
9
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
Front and rear panels Front panel
3
QUICK SPLIT DIALOG
The currently selected program is assigned to the high range and
a program of the bass category is assigned to the low range.
Select the split program, swap the high and low programs if
desired, and adjust settings such as the split point, volume, and
octave. By pressing the MENU (WRITE) button you can save the
settings to a user combination bank. (see page 30)
10. AUDIO REC (Audio recorder)
Here is where you can control the audio recorder, which lets you
record and play back your KROSS performance or signal from an
external audio input. You can execute functions such as play,
stop, or record, and adjust various settings for the recorder.
To control the audio recorder, use the AUDIO REC
(play/pause) button and the four buttons below the AUDIO
RECORDER SETUP window.
In order to use the audio recorder, you’ll need a SD card
(separately sold).
(play/pause) button ( )
This is a dedicated button that executes the recorder playback (or
record) and pause functions. In any mode, this button lets you
immediately play (or record) or pause. The state of the light and
color of the button indicates the operating status of the recorder.
If you hold down the EXIT button ( ) and press the
(play/pause) button ( ), the AUDIO
RECORDER SETUP window appears.
11. Display
This shows the parameters and settings of the KROSS, as well as
a variety of other information.
Pages:
Each screen of parameters or information is called a
“page.” To edit or adjust the settings of the KROSS, you’ll access
the page that contains the desired parameter, and then change its
value.
Dialog box:
The screen that appears when you need to perform a
command function, confirm a result, or recall a temporary
function is called a “dialog box.”
For more about various objects that you’ll see in pages and dialog
boxes, please see page 7.
Adjusting the display contrast
To adjust the contrast of the display, hold down the EXIT button
and turn the VALUE dial. You can also adjust the display contrast
in the Global/Media mode PREF 1 page. (see page 117)
12. Functions / Page controller
You’ll use these buttons to access pages in the display, and to
select or execute functions that provide convenient commands in
each page. The functions of the four buttons will change
according to the page or dialog box that’s currently shown.
FUNCTION button
This button shows a function list containing convenient
commands on each page.
PAGE– button
PAGE+ button
Use these two buttons to move between pages in order to select
the page that you want to see. The page name or tab that’s
displayed on the upper part of the page indicates the currently
shown page.
MENU button
This button displays the page menu for each mode, allowing you
to select a page.
Operations while a dialog box is shown
While a dialog box is shown, the function of these four buttons
will change so that you can perform tasks that are appropriate for
that dialog box. The functions assigned to the buttons are shown
in the bottom of the display.
For example, suppose that you’re in Program mode and press the
FUNCTION button to access the function list.
The functions that are assigned to the four buttons are shown in
the bottom of the dialog box.
If you press the CLOSE (actually FUNCTION) button, the dialog
box will close and you’ll return to the previous page.
Press the
(actually PAGE–) button or
(actually PAGE+)
button to select a function.
Press the OK (actually MENU) button to open or execute the
selected function.
For example if you select Write Program and press the MENU
(OK) button, the WRITE PROGRAM dialog box will appear.
Here, the FUNCTION (CANCEL) and MENU (OK) functions
are assigned to the two buttons.
13. Value Controller
Use these to edit in the display. You’ll use these to move the
cursor and select parameters, to edit values, and also to execute or
cancel commands.
VALUE dial
Edit the value of the parameter (edit cell) where the cursor is
located.
Tips:
You can adjust the contrast of the display by holding down
the EXIT button ( ) and turning the VALUE dial.
EXIT button ( )
Use this button to cancel the execution of a function or the change
in a parameter value, or to close a dialog box.
You’ll also use this to move to the first page (such as the MAIN
page) within the mode.
Unlit: Stopped
Lit green: Playing
Blinking green: Playback is paused
Lit red: Recording
Blinking red: Recording is paused
Blinking orange: Recording is paused
(waiting for Auto input)
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg Kross 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg Kross 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Korg Kross 2

Korg Kross 2 Gebruiksaanwijzing - Deutsch - 152 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info