488492
4
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
5
Quick Start
Before you make connections with any external
devices, turn all volumes to the minimum position
and turn off the power.
1. If you will be powering the AX10A with batteries,
open the battery compartment located on the
bottom panel, and install four AA alkaline
batteries (sold separately). If you will be powering
the AX10A with the separately sold AC adaptor,
connect the AC adaptor to the rear panel DC9V
connector (the power will turn on).
2. Set the INPUT L/H switch to the appropriate
position for the output of your guitar. Use the “H”
position if your guitar has a high output pickup, or
the “L position if your guitar has a low output
pickup.
3. Connect your guitar to the AX10A’s INPUT jack. If
you are using batteries, the power of the AX10A
will turn on at this point.
4. If you’re connecting the AX10A to a PA system or
guitar amp, set the AMP/LINE switch to “AMP”. If
you’re connecting it to headphones, mixer or a
recorder, set this switch to “LINE”.
5. Connect the AX10A’s OUTPUT jack to the INPUT
of your guitar amp or recorder. If you want to use
headphones, connect them to the OUTPUT jack.
6. Turn on the power of the connected equipment,
and raise the volume to an appropriate level. You
can also use the AX10A’s MASTER buttons to
adjust the volume.
7. Press the program select switches to change
programs.
TIPS
The AX10A has 40 preset programs (01–94) and 40
user programs (0.1–9.4). With the factory
settings, the user programs contain the
same contents as the preset programs.
8. You can control the pedal effect by using the
expression pedal. The pedal is active when the
PEDAL LED at the upper left of the pedal is lit. If
this LED is dark, advance the pedal all the way
forward to make the LED light. Now the pedal will
be active.
Editing a Sound
9. Turn the MIC & BODY selector to select your
desired sound, and use the DEPTH buttons to
adjust the depth. Use the tone control knobs to
adjust the tone and volume. If acoustic feedback
occurs, you can turn the NOTCH selector to
suppress the frequency at which feedback tends
to occur.
Editing and Effect
10. Adjust the chorus or ambience effect as desired.
Use the AMB (CHORUS) buttons to adjust the
depth of the ambience effect. By holding down
the FUNCTION button while pressing the AMB
(CHORUS) buttons you can adjust the depth of
the chorus effect. With a setting of “00” there will
be no effect. The delay/reverb time of the
ambience effect can be adjusted by pressing the
TAP button at the desired timing interval.
11. To adjust the pre-effect located in front of Mic &
Body, press the PRE FX button to select an
effect, and use the VALUE buttons to adjust it.
This concludes our brief introduction to the
AX10A. This manual contains much more
information about the AX10A, so please read it to
ensure that you are taking full advantage of all its
capabilities.
54
3
6
7
8
8
9
7
9
10
10
11
10
2 1
9
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg AX10A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg AX10A in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info