488491
11
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
11
4. Appendices
4. Appendices
Adjusting the expression pedal
(Calibration)
If you find the expression pedal difficult to use, perform this pro-
cedure so that the pedal will function optimally. For example if
the effect does not reach maximum when the pedal is advanced
all the way, or does not reach minimum when the pedal is re-
turned all the way, use the following procedure to make the ap-
propriate adjustments.
When making adjustments, use your hand to move the pedal.
Accurate calibration may not be possible if you use your foot to
operate the pedal.
1. Turn on the power while simultaneously holding down the
EXIT switch and the PEDAL switch. The Multi-display will
show “PEDAL” for approximately one second, and will then
indicate “MIN.”
2. Slowly return the pedal to the full back position. When it stops,
release your hand and press the WRITE switch. The Multi-
display will change from “MIN” to “MAX.”
If you decide to halt the adjustment procedure, press the EXIT
switch. The power-on display will appear, and you will enter
Program mode.
3. Slowly advance the pedal. When it stops, release your hand
and press the WRITE switch.
2. press slowly
3. press slowly
The Multi-display will indicate “COMPLT” for approximately
one second. Then the power-on display will appear, and you will
enter Program mode.
After the adjustment procedure has been completed, verify the
operation of the pedal.
Select an effect that will make it easy to verify the adjustment.
For example, set the Pedal effect to the VOLUME effect, set the
value to 0, and check the MIN level when the pedal is returned
all the way.
If you make a mistake during the calibration procedure, the Multi-
display will indicate “
ERROR
,” and you will return to the screen
before the adjustment (the “
MIN
” display). If the “
ERROR
” dis-
play appears for repeated attempts, a malfunction may have oc-
curred. In this case, please contact your dealer.
Restoring the user programs to the
factory settings (Reload)
1. Turn on the power while simultaneously holding down the
EXIT switch and the PROG/FX SELECT switch. The Multi-
display will indicate “RELOAD?
2. Press the WRITE switch. The Multi-display will change to
RELOAD,” and the reload operation will begin. When the
reload operation is completed, the display will indicate
COMPLT” for approximately one second. Then the power-
on display will appear, and you will enter Program mode.
Never turn off the power during the reload operation.
When you perform the reload operation, all user programs will
be rewritten. Rhythm settings will also be initialized.
Troubleshooting
If you suspect a malfunction, please check the following points
first. If this does not resolve the problem, contact a nearby Korg
dealer.
1. Power does not turn on
Are batteries installed? Alternatively, is the AC adapter con-
nected to an AC outlet? (p.5)
Is a mono cable connected to the INPUT jack? (p.5)
2. No sound
Are your guitar, amp, and headphones connected to the cor-
rect jack? (p.5)
Is your amp turned on, and is it set accordingly?
Is one of your connection cables broken?
Has the MASTER VOL (master volume) of the AX100G been
turned down? (p.6)
Is the program level of the AX100G set to “0” or to a low value?
(p.9, 16)
Is the Level of the Drive Amp effects set to “0” or to a low
value?
Is the volume of your guitar turned down?
Is the AX100G muted?
If VOLUME is selected for the PEDAL effect, has the pedal
been returned to the full back position?
3. Effects are not applied
Is the AX100G bypassed? (p.6)
Are the effects used by the program turned on? (p.6)
4. Rhythm does not function
Are you in Program mode or in Effect Select mode? The
rhythm will not function in Phrase Trainer mode.
Is the rhythm output level set to “0”? (p.7)
5. Pedal does not function
Have you selected a program that uses an effect in the PEDAL
effect mode? (p.6)
Is the pedal indicator lit? (p.4, 7)
Try calibrating the expression pedal. (p.11)
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Korg-AX100G

Zoeken resetten

  • Korg AX 100G. Ik vind de handleidingen die ik vind wel erg beperkt (18 pagina's). Is er nergens een beschrijving te vinden van alle knopjes, functies en mogelijkheden van het apparaat? Gesteld op 13-4-2024 om 08:07

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg AX100G bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg AX100G in de taal/talen: Engels als bijlage per email.

De handleiding is 0,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info