3. Set the transmitter switch to a channel (1, 2, 3 or 4) and check which offers the best reception. On the monitor
select the same channel by pushing the channel button until the monitor shows the picture of the camera
4. Connect the power cable (red/black) to a battery power source
5. Connect the mini plug (2.5mm) of the camera to the contra plug (2.5mm) of the cable of the transmitter
6. Camera mounted on the separate bracket (included)
Screw the small metal square plate to the gooseneck
bracket. Slide the back of the monitor over the metal
plate to attach the monitor to the gooseneck bracket
Attach the antenna to the antenna connection on the
back of the monitor
Specications:
Monitor:
• Voltage:DC12V
• ConsumptionCurrent:280mA
• OperationTemperature:-10°C~+50°C
• OperationHumidity:85%(max.)
• DisplayFormat:320x240
• ScreenSize:3.5”(diagonal)
• Receivingfrequency:2414MHz,2432MHz,2450MHz,2468MHz
• Receivingsensitivity:-85dBm
• VideoSystem:PAL/NTSC
• Dimensions:102x71x25mm
Camera:
• ImagingSensor:CMOS
• System:PAL(638x582)/NTSC(512x492)
• Horizontalresolution:380TVLines
• Viewangle:120°
• S/NRatio:48dB
• ConsumptionCurrent:200mA
• Voltage:DC12V
• Workingtemperature:-20°C~+70°C
• Dimensions:ø24x38mm
• Dust/waterprotection:IP44(protectagainstsoliditems>1mmandalsowatersplashingfromalldirections)
Transmitter:
• Transmittingfrequency:2414MHz,2432MHz,2450MHz,2468MHz
• Transmissionpower:10mW
• Bandwidth:18MHz
• Voltage:DC12V~16V
• Unobstructedeffectiverange:±50m
• Dimensions:55x49x10mm