79
Flash picture is too
dark.
Subject is beyond
flash range.
Make sure the
subject is within the
flash range.
When using the
built-in flash, the
bottom of the
picture is dark.
Lens hood was
attached or subject
distance was less
than 1m (3.3ft).
Remove the lens
hood. To prevent
lens shadowing, the
subject must be at
least 1m (3.3ft.)
from the camera.
Err appears on the
data panel.
Remove the batteries. Reinsert them after
turning the camera off and on. If normal
camera operation does not resume or the
camera malfunctions repeatedly, contact an
authorized Konica Minolta service facility.
CAUTION: if the film was not rewound, opening the back cover with
this method will fog the film; use a film changing bag, completely
dark room, or place the camera under a thick blanket.
To remove the film from the camera in case of a malfunction, use
the following procedure:
1. Turn the camera off.
2. Turn the function dial to the ISO position.
3. While pressing the function button and AEL button, turn the
camera on. The film transport motor will activate for a second to
release the film-chamber lock. The back cover can be opened.
When the camera is open, gently pull the film off the take-up
spool and rewind it back into the cartridge.
Contact an authorized Konica Minolta service facility.
