780519
21
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
KONA OWNER’S MANUAL
20
CAUTION: If your bike has a disc brake, exercise
care in touching the rotor or caliper. Disc rotors have
sharp edges, and both rotor and caliper can get very
hot during use.
a. Removing a disc brake or rim brake Front Wheel
(1) If your bike has rim brakes, disengage the brake’s quick-
release mechanism to increase the clearance between the
tire and the brake pads (See Section 4.C g. 12).
(2) If your bike has cam action front wheel retention
or "quick-release axle," move the cam lever from the
locked or CLOSED position to the OPEN position (gs. 8a
& b). If your bike has through bolt or bolt-on front wheel
retention, loosen the fastener(s) a few turns counter-
clockwise using an appropriate wrench, lock key or the
integral lever.
(3) If your front fork has a clip-on type secondary
retention device, disengage it and go to step (4). If your
front fork has an integral secondary retention device,
and a traditional cam action system (g. 8a) loosen the
tension adjusting nut enough to allow removing the wheel
from the dropouts. If your front wheel uses a cam-and-
cup system, (g. 8b) squeeze the cup and cam lever
together while removing the wheel. No rotation of any
part is necessary with the cam-and-cup system.
You may need to tap the top of the wheel with the palm of
your hand to release the wheel from the front fork.
b. Installing a disc brake or rim brake Front Wheel
CAUTION:
If your bike is equipped with a front disc
brake, be careful not to damage the disc, caliper or brake
pads when re-inserting the disc into the caliper. Never
activate a disc brake’s control lever unless the disc is
correctly inserted in the caliper. See also Section 4.C.
(1)
If your bike has cam action front wheel retention, move
the cam lever so that it curves away from the wheel (g.
8b). This is the OPEN position. If your bike has through
bolt or bolt-on front wheel retention, go to the next step.
(2) With the steering fork facing forward, insert the wheel
between the fork blades so that the axle seats rmly at
the top of the fork dropouts. The cam lever, if there is
one, should be on rider’s left side of the bicycle (g. 8a
& b). If your bike has a clip-on type secondary retention
device, engage it.
(3) If you have a traditional cam action mechanism:
holding the cam lever in the ADJUST position with your
right hand, tighten the tension adjusting nut with your
left hand until it is nger tight against the fork dropout
(g. 8a). If you have a cam-and-cup system: the nut and
cup (g. 8b) will have snapped into the recessed area of
the fork dropouts and no adjustment should be required.
(4) While pushing the wheel rmly to the top of the slots
in the fork dropouts, and at the same time centering the
wheel rim in the fork:
(a) With a cam action system, move the cam lever up-
wards and swing it into the CLOSED position (g. 8a & b).
The lever should now be parallel to the fork blade and
curved toward the wheel. To apply enough clamping force,
you should have to wrap your ngers around the fork blade
for leverage, and the lever should leave a clear imprint in
the palm of your hand. (b) With a through-bolt or bolt-on
system, tighten the fasteners to the torque specications
in the hub manufacturer’s instructions.
NOTE: If, on a traditional cam action system, the lever
cannot be pushed all the way to a position parallel to
the fork blade, return the lever to the OPEN position.
Then turn the tension adjusting nut counterclockwise
one-quarter turn and try tightening the lever again. 19
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kona 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kona 2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info