780528
28
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
KONA OWNER’S MANUAL
different terrain or weather conditions depends largely
on tire pressure. Inating the tire to near its maximum
recommended pressure gives the lowest rolling
resistance; but also produces the harshest ride.
High pressures work best on smooth, dry pavement.
Very low pressures, at the bottom of the recommended
pressure range, give the best performance on smooth,
slick terrain such as hard-packed clay, and on deep, loose
surfaces such as deep, dry sand.
Tire pressure that is too low for your weight and the
riding conditions can cause a puncture of the tube by
allowing the tire to deform sufciently to pinch the inner
tube between the rim and the riding surface.
CAUTION: Pencil type automotive tire gauges
can be inaccurate and should not be relied upon for
consistent, accurate pressure readings. Instead, use a
high quality dial gauge.
Ask your dealer to recommend the best tire pressure for
the kind of riding you will most often do, and have the
dealer inate your tires to that pressure. Then, check
ination as described in Section 1.C so you’ll know how
correctly inated tires should look and feel when you
don’t have access to a gauge. Some tires may need to
be brought up to pressure every week or two, so it is
important to check your tire pressures before every ride.
Some special high-performance tires have unidirectional
treads: their tread pattern is designed to work better in one
direction than in the other. The sidewall marking of a unidi-
rectional tire will have an arrow showing the correct rotation
direction. If your bike has unidirectional tires, be sure that
they are mounted to rotate in the correct direction.
2. TIRE VALVES: There are primarily two kinds of
bicycle tube valves: The Schraeder Valve and the
Presta Valve. The bicycle pump you use must have the
tting appropriate to the valve stems on your bicycle.
The Schraeder valve [Fig. 18a] is like the valve on a car tire.
To inate a Schraeder valve tube, remove the valve cap and
clamp the pumptting onto the end of the valve stem. To let
air out of a Schraeder valve, depress the pin in the end of the
valve stem with the end of a key or other appropriate object.
The Presta valve [Fig. 18b] has a narrower diameter
and is only found on bicycle tires. To inate a Presta
valve tube using a Presta headed bicycle
pump, remove the valve cap; unscrew
(counterclockwise) the valve stem lock nut;
and push down on the valve stem to free it
up. Then push the pump head on to the valve
head, and inate. To inate a Presta valve with
a Schraeder pump tting, you’ll need a Presta
adapter (available at your bike shop) which
screws on to the valve stem once you’ve freed
up the valve. The adapter ts into the Schraeder
pump tting. Close the valve after ination.
To let air out of a Presta valve, open up the
valve stem lock nut and depress the valve stem.
WARNING: Patching a tube is an emergency repair.
If you do not apply the patch correctly or apply several
patches, the tube can fail, resulting in possible tube
failure, which could cause you to loose control and fall.
Replace a patched tube as soon as possible.
5. SERVICE
WARNING: Technological advances have made
bicycles and bicycle components more complex, and
the pace of innovation is increasing. It is impossible
for this manual to provide all the information required
to properly repair and/or maintain your bicycle. 27
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kona 2013 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kona 2013 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info