679202
6
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
- 4 -
4. When you have finished shaving, slide the
On/Off switch 5 downwards.
5. Clean the appliance as described in the chapter
"Cleaning and Care".
Trimming
The long-hair trimmer w integrated onto the Men‘s Sha-
ver is suitable for trimming sideboards and moustaches.
1. Slide the switch for the long-hair trimmer e
upwards. The long-hair trimmer w raises itself.
2. Press the locking switch 4 and, at the same
time, slide the On/Off switch 5 upwards.
The long-hair trimmer w is running.
You can now trim the hairs as required.
3. When you have finished trimming, slide the
On/Off switch 5 downwards.
4. Remove any loose hairs on the long-hair trimmer w
with the brush 9.
5. Slide the switch for the long-hair trimmer e
downwards. The long-hair trimmer w lowers
itself.
Changing the cutters
Risk of electric shock!
Before changing the cutters 2 ALWAYS disconnect
the mains power plug! Otherwise, there is the great
risk of receiving an electric shock!
If...
- ... the shave is noticeably unsatisfactory,...
- ... you must run the Men‘s Shaver over the same spot
several times to obtain an acceptable result,...
- ... shaving takes noticeably longer,...
- ... damage is visible on the cutters 2,...
... the cutters 2 must be exchanged.
New cutters can be obtained with the enclosed
order form.
When you have acquired a new set of cutters 2,
remove the old set of cutters 2:
1. Press the release button 3. The cutting unit 2
springs up.
2. Extend the cutting unit 2 a little, so that it allows
itself to be pulled upwards.
3. Replace the new cutting unit 2 back onto the
Men‘s Shaver. Ensure that it engages and sits
firmly.
Cleaning and care
Risk of electric shock!
Always remove the mains power plug before cleaning
the appliance! Otherwise, there is the great risk of re-
ceiving an electric shock!
Attention!
Do not use abrasive, chemical or caustic cleaning
agents to clean this appliance. They could irreparably
damage the appliance.
Cleaning with the brush
Clean the cutting heads 1 with the brush 9 after
every shave.
1. Press the release button 3, so that the cutting
unit 2 springs up.
2. Carefully tap the cutting unit 2 on a smooth
surface or blow the hair trimmings away.
3. Use the brush to remove the remaining hair
trimmings.
Cleaning under running water
The cutting unit 2 is suitable for cleaning un-
der running water.
1. Press the release button 3, so that the cutting
unit 2 springs up.
2. Hold the cutting unit 2 under the flow of water
so that the water runs from the inside to the outside,
through the cutting heads 1.
IB_KH5540_32925_LB6 05.06.2009 12:19 Uhr Seite 4
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kompernass KH 5540 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kompernass KH 5540 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kompernass KH 5540

Kompernass KH 5540 Gebruiksaanwijzing - Nederlands, Deutsch - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info