Knob Screw Instruction:
·
A: MIC1 and B: MIC 2 are microphone knobs, they have the same height. One without
hole for waterproof, one with hole for better sound quality when recording sound alone.
C: USB is a USB knob without hole, and it is slightly higher than microphone knobs.
Please note inside the USB knob there is a waterproof sealing pad in it to prevent dust or
liquid, please note the difference.
·
You must tighten these knobs when you use them.
Video (Power ON/OFF):
1. Turn on:
Press and hold this operation button for 2 seconds to start the device. It gets into the standby
mode. Meanwhile the blue light indicator is on.
2. Record video:
In the standby mode (the blue light on), press ON/OFF button, blue lights blink 3 times then
automatically switch off, means the camera into the video mode.
3. Turn off:
During recording, press and hold operation button to save the recording file and then it will be
turn off (the LED with flash 3 times).
4. PC Camera:
Turn off the watch camera, hold on the Power ON/OFF button and connect it to PC
immediately before the light change to blue , hold on the Power ON/OFF button until the red
light is on, now it enters into PC Camera (webcam) mode. In this mode, your camera can be
used as a PC camera, with your friends online video chat, take photos, and so on.
You can open it by skype or “amcap” which is a free download from the internet. Once you
close it by “amcap” and hope to reconnect it for use, you have to repeat the same above
operation.