782789
25
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
25
English
Preparation
Putting salt into the salt container
Fig. 2Depending on your tap water hardness
(hardness degree) use additional salt
(water softener). Always consider
instruction provided with the salt.
• Remove the basket and then
unscrew and remove the cap from
the salt container.
• Before first usage, pour 1.5 lt. of
water in the salt container of your
machine.
• Place the end of the funnel
(supplied) into the hole and pour in
about 1.5 kg of salt. It is normal for a
small amount of water to come out
of the salt container.
• After filling the container, screw the
cap tight by turning it clockwise.
• Immediately after filling the salt
into the salt container, a washing
program should be started (rapid
program suggested). Otherwise
the filter system, pump or other
important parts of the machine may
be damaged by salty water which
will void the warranty.
• If the salt container is empty, the
softener (salt) indicator light
turns on.
Note:
Depending on how fast/fully the salt
dissolves, the salt warning light may still be
on even though the salt container is filled.
Warning
• Only use salt specifically designed for
use in dishwashers! All other types of
salt, not specifically designed for use
in a dishwasher, especially table salt,
will damage the dishwasher. In case of
damages caused by the use of unsuitable
salt the manufacturer does not give any
warranty nor is liable for any caused
damages.
• If salt has been spilled, a soak or a rapid
program should be run to remove the
excess salt.
• Only fill in salt right before starting one
of the complete washing programs. This
will prevent any grains of salt or salty
water, which may have been spilled, from
remaining on the bottom of the machine
for any period of time, which may cause
corrosion.
• The salt container must only be refilled
when the salt warning light in the control
panel comes on.
Adjusting salt consumption
Fig. 3Activate the setup mode: Switch
on the dishwasher with the on/o
switch and push and hold the program
buttonP for approx. 6 seconds. The
machine will enter the setting mode
which is indicated by the alternatingly
blinking indicator lights of and .
Adjust level of salt consumption:
Press the program button P to select
the proper setting according to your
local environment. Follow the table
below to find correct setting.
Water Hardness level Setting
°dH 1) mmol/l 2)
0-5 0-0.94 H1
6-11 1.0-2.0 H2
12-17 2.1-3.0 H3*
18-22 3.1-4.0 H4
23-34 4.1-6.0 H5
35-55 6.1-9.8 H6
The product will exit the setup mode
automatically 5 seconds after the last
setting/operation of the switch.
Note:
1) German measurement for the degree of
water hardness
2) Millimol, international unit for water hardness
*) Factory setting
Contact your local water board for
information on the hardness of your water
supply.
IM_KDW 60031 A2 FI_180326_V05_HR.indb 25 26/3/18 12:08 pm
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Koenic KDW 60031 A2 FI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Koenic KDW 60031 A2 FI in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 22.52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info