585542
81
Verklein
Vergroot
Pagina terug
1/94
Pagina verder
User Manual
1
Declaration of Conformity
Responsible Party: JK Imaging Ltd.
Address: JK Imaging Ltd., 17239 South Main Street, Gardena, CA 90248, USA
JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK
Company website: www.kodakpixpro.com
For Customers in the U.S.A.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
For Customers in Europe
"CE" mark indicates that this product complies with the European requirements for safety, health, environment
and customer protection. "CE" marked cameras are intended for sales in Europe.
This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of electrical waste and
electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please
use the return and collection systems available in your country for proper, safe disposal of this product.
Packaging: Please follow local regulations for the recycling of packaging.
Batteries: Please dispose of used batteries at designated collection centers.
BEFORE YOU START
2
About this Manual
Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe
place for future reference.
JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted,
transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any
means, without the prior written permission of JK Imaging Ltd..
All trademarks mentioned in this manual are used for identification purposes only and are properties of their
respective owners.
This manual provides you with instructions on how to use your new KODAK PIXPRO Digital Camera. Every effort
has been made to ensure that the contents of this manual are accurate, however JK Imaging Ltd. reserves the right to
make changes without notice.
Throughout this manual, the following symbols are used to help you locate information quickly and easily:
Indicates useful information.
Indicates precautions are to be taken while operating the camera.
In introducing you how to operate this camera, the following symbols may appear to facilitate your understanding:
Item properties」: The option properties in the camera interface are indicated by the symbol .
3
SAFETY NOTES
Safety notes for this camera
Do not drop the camera or allow it to hit solid objects.
Do not attempt to disassemble or repair the camera.
Do not use or store the camera in dusty places or on
a beach to prevent dust or sand from entering the
camera, causing possible damage to it.
Do not use or store the camera in a hot environment
or under direct sunlight.
Do not use or store the camera near a powerful
magnetic field, for example near a magnet or
transformer.
Avoid touching the lens of the camera.
Do not expose the camera to direct sunlight for a long
period time.
To prevent the camera from being damaged by
moisture, do not use or store the camera in very
humid environments, such as in rain or near bodies of
water.
If water accidentally comes in contact with the
camera. turn the camera off, remove the battery and
the memory card, and dry it within 24 hours.
When you take the camera from a cold place to a
warmer environment, condensation may occur. Please
wait for a reasonable period of time before you turn it
on.
Before you remove the battery and memory card, the
camera should be turned off.
When you clean the body of the camera, don not use
abrasive, alcohol-based or organic cleaner.
Use a professional lens wiping cloth and dedicated
cleaner to wipe and clean the lens.
Download your photos and remove the memory card
when you are going to store the camera for a long
period of time.
If this camera is not in use for a long time, please keep
it in a dry and clean condition.
Our company will not pay compensation for any
failure of playback of pictures or videos caused by
improper operation.
4
Safety notes for battery
Please use a battery that is the same type as the one
included.
Please use the attached charger to charge the battery.
If battery fluid leaks inside the camera, contact our
customer service department. If the battery fluid
leaks onto your skin, rinse your skin with clean water
and seek immediate medical attention.
Disposal of used batteries should be carried out
in accordance with local (national or regional)
regulations.
To prevent the battery from being damaged, do not
drop the battery or allow it to hit solid objects or to be
scratched by the objects.
Do not let the battery come in contact with metal
objects (including coins) to avoid short circuiting,
discharging, excessive heat, or possible leakage.
Do not attempt to disassemble the battery.
Do not expose the battery to water. Always keep the
battery contacts dry.
Do not heat the battery or throw it into a fire to avoid
a possible explosion.
Do not store the battery in a hot environment or in
direct sunlight.
If the battery overheats during charging or use, stop
charging or use immediately. Turn off the product,
remove the battery carefully, and wait until it cools
down.
When the camera is stored for a long period of time,
remove the battery and keep it in a dry place that is
not accessible to infants and children.
In a colder environment, the performance of the
battery could be noticeably reduced.
When you install the battery, install it according to
the positive and negative markings on the battery
compartment. Never force it into the battery
compartment.
5
Safety notes for memory card
We suggest buying only well-known, name brand
memory cards to ensure peak performance.
Format the memory card using the camera before you
use it or insert a new one.
Do not drop the memory card or allow it to hit solid
objects to avoid damaging it.
Do not attempt to disassemble or repair the memory
card.
Do not expose the memory card to water. Always
keep it dry.
Do not remove the memory card when the camera
is turned on. Otherwise, the memory card could be
damaged.
Do not directly edit the data on the memory card.
Copy the data to your PC before you edit them.
When the camera is stored for a long period of time,
be sure to download your photos and remove the
memory card. Store it in a dry environment.
Do not modify the name of the files or folders of the
memory card using your PC. Modifying the file names
may cause the files to not be recognized on the
camera or a possible error may occur.
A photo taken with the camera will be stored in the
folder that is automatically generated on the SD card.
Do not store photos that are not taken using this
camera in these folders as the pictures cannot be
recognized during the playback.
When you insert a memory card, make sure the notch
of the card matches the markings on the top of the
card slot.
6
Other Safety Notes
Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to
be written and the camera may not power on later.
When using your camera on an airplane, observe the relevant rules specified by the airline.
Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels. These pixels do no
effect the quality or performance of the camera, photos or video.
Do not expose the LCD to water. In a humid environment, only wipe it with a soft and dry cleaning cloth.
If the LCD is damaged and the liquid crystal comes into contact with your skin, wipe your skin with a dry cloth
immediately and rinse it with clean water. If liquid crystal comes into
contact with your eyes, wash them with clean water at least for 15 minutes and seek immediate medical attention. If
you accidentally swallow liquid crystal, rinse your mouth immediately and seek medical attention.
7
BEFORE YOU START ................................. 1
SAFETY NOTES .......................................... 3
CONTENTS .................................................. 7
GETTING READY ...................................... 11
Accessories Included .................................................... 11
Part Names ..................................................................... 12
Installing Battery and Memory Card ......................... 15
Charging Battery............................................................ 17
Turning Camera On and Off ........................................ 18
How to Take Pictures .................................................... 18
Set your Language, Date/Time .................................. 19
Set your Language, Date/Time after
the first power-on .................................................. 19
Resetting your Language ...................................... 20
Resetting Date/Time ............................................ 21
MODE OVERVIEW ...................................22
Display Setting ............................................................... 22
LCD Display .................................................................... 23
Overview of the Screen Icons in
Photo Shooting Mode ........................................... 23
Overview of the Screen Icons in
Movie Mode............................................................ 25
Overview of the Screen Icons in
Playback Mode ....................................................... 26
Using the Mode Button ................................................ 27
Manual Mode ................................................................ 28
Auto Mode ..................................................................... 28
Anti-shake ....................................................................... 29
Portrait ............................................................................. 29
Panorama Mode ........................................................... 30
CONTENTS
8
Scene Mode (SCN) ....................................................... 31
Auto Scene Mode (ASCN) .................................. 34
BASIC OPERATION ...................................36
Using the Zoom Function ............................................. 36
Macro Mode ................................................................... 37
Self-timer Setting .......................................................... 38
Flash Mode ..................................................................... 39
EV Setting........................................................................ 40
Exposure Compensation ...................................... 40
ISO ............................................................................ 41
Shutter Adjustment............................................... 41
Using Quick Recording ................................................. 42
PLAYBACK .................................................. 43
Viewing Photos and Videos ......................................... 43
Thumbnail View ............................................................. 44
Using Zoom Playback (for still pictures only) ......... 45
Slideshow ........................................................................ 46
Photos and Video Deletion ......................................... 47
USING THE MENUS .................................48
Photo Setup Menu ......................................................... 48
Expo Metering (Exposure Metering) ................. 48
Image Size ............................................................... 49
Cont. AF ................................................................... 49
Continuous Shot .................................................... 50
Focus Setting .......................................................... 51
White Balance Setting .......................................... 51
Color Effect ............................................................. 52
Photo Shooting Setting Menu ..................................... 54
9
Quality ..................................................................... 54
AF Assist Beam ...................................................... 55
Digital Zoom ........................................................... 55
Date Imprint ........................................................... 56
Quick Review .......................................................... 56
Movie Menu ................................................................... 57
Expo Metering (Exposure Metering) ................ 57
Video Quality .......................................................... 58
Color Effect ............................................................. 58
Movie Setting Menu ..................................................... 59
Digital Zoom ........................................................... 59
Playback Menu .............................................................. 60
HDR .......................................................................... 60
Red-Eye Reduction ................................................ 61
Rotate ....................................................................... 61
Resize ....................................................................... 62
Color Effect ............................................................. 62
Playback Setting Menu................................................. 63
Protect ...................................................................... 64
Delete ....................................................................... 65
DPOF (Digital Print Order Format) .................... 66
Trim ........................................................................... 66
Setup Menu .................................................................... 67
Power Saver ............................................................ 68
Sound Settings ....................................................... 68
Language ................................................................. 69
Zone.......................................................................... 69
Date/Time .............................................................. 69
File / Software ................................................................ 70
Format Memory ..................................................... 70
10
Copy to Card ........................................................... 71
File Numbering ....................................................... 71
Reset ......................................................................... 72
FW Version ............................................................. 72
CONNECTIONS ......................................... 73
Connecting to a Computer .......................................... 73
Setting the USB Mode .......................................... 73
Transferring files to your computer ................... 74
Video System ................................................................. 75
Set Eye-Fi SD Card Connection Mode ....................... 76
Connecting to a PictBridge Compatible Printer ...... 77
Setting the USB Mode .......................................... 77
Connecting to your Printer .................................. 78
Using the PictBridge Menu .......................................... 79
Print (with Date) .................................................... 79
Print (without Date) .............................................. 80
Print Index ............................................................... 81
Print DPOF Images ................................................ 82
Exit ............................................................................ 82
APPENDICES .............................................. 83
Specifications ................................................................. 83
Prompts and Warning Messages ............................... 87
Troubleshooting ............................................................. 91
11
GETTING READY
Your camera box should contain the camera model you purchased along with the following accessories. If anything is
missing or appears to be damaged, please contact your retailer. (The battery charger may be different in shape than what
is pictured below. This is due to different power requirements across countries or regions)
Accessories Included
Micro USB cable
Warranty card
AC adapter Wrist strapRechargeable Li-ion battery
Quick Start Guide
Quick start guide Service card
STOP
12
Part Names
1. Flash lamp
2. AF assist beam/Self-timer lamp
3. Microphone
4. Lens
13
5. LCD
6. Zoom button
7. Indicator lamp
8. Playback button
9. Menu button
10. Mode button
11. Display button/Arrow button (Up)
12. Flash button/Arrow button (Right)
13. Delete button/Arrow button (Down)
14. Macro button/Self-timer button/
Arrow button (Left)
15. SET button
16. Micro USB port
17. Strap eyelet
14
18. Power button
19. Fast video recording button
20. Shutter button
21. Tripod socket
22. Speaker
23. Battery cover
15
2. Insert the battery into the battery slot in the correct
position as shown in the following diagram:
1. Open the battery cover.
Installing Battery and Memory Card
16
4. Close the battery cover.3. Insert the memory card into the memory card slot as
shown in the diagram below:
A memory card (SD/SDHC) is optional and is
not included in the product package. It needs to
be purchased separately. Please use an original
memory card which is Class 4 or higher and has a
capacity of 4GB to 32GB.
To remove your memory card, open the battery
cover, gently press the memory card to eject it and
remove it carefully.
Write protection buckle
17
Before you charge your battery, you should turn the
camera off and insert the battery.
1. Connect the camera and the power charger using the
supplied micro USB cable.
2. Insert the plug of the power charger into the wall
outlet to charge the battery.
The charger is for indoor use only.
After the battery is stored for a long period of time,
use the supplied power charger to charge the battery
prior to use.
Charging indicator:
Red: Charging
The indicator will go out once charging is finished,
and the camera will be powered off automatically.
To have maximum battery life, charge the battery
for at least 4 hours the first time.
When the camera is turned off, you can also
connect the camera to your PC using a micro USB
cable to charge the battery.
Please charge the battery indoors between 0°C
and 40°C.
Charging Battery
Indicator lamp
18
Turning Camera On and Off
Press the power button to turn the camera on. To turn the
camera off, press the power button again.
Power button
Press and hold the button to power on and enter
Playback mode.
1. Hold the camera with both hands , not blocking the
flash and lens by fingers.
2. Aim the camera at the object and then frame with
the LCD.
3. Use the zoom button to select Tele or Wide positions
to zoom in or out on your subject.
4. Press the shutter button half way to focus on the
subject. When the focus frame turns green, press the
shutter button completely down to take the picture.
How to Take Pictures
19
Set your Language, Date/Time
Set your Language, Date/Time after the first power-on
1. When you turn the camera on for the first time, the
language selection screen appears.
2. Press the arrow buttons to select your desired
language.
3. After you press the button to confirm the
selection, the Date/Time settings screen appears.
4. Press the left/right arrow button to select the Date/
Time to be adjusted: Time is displayed in YYYY.
MM.DD HH:MM.
5. Press the up/down arrow button to adjust the value
for the selected Date/Time.
6. Press the button to confirm the time settings and
the snapshot screen appears.
20
Resetting your Language
After you set your language for the first time, follow the
instructions below to reset your language.
1. Press the button, press the up/down arrow button
to select , and press the button to enter the
menu.
2. Press the up/down arrow button to select , and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select
Languageand press the button or right arrow
button to enter the menu.
4. Press the arrow buttons to select your desired
language and press the button to confirm.
5. Press the button and the snapshot screen
appears.
21
Resetting Date/Time
After you set your Date/Time for the first time, follow
the instructions below to reset date and time.
1. Press the button, press the up/down arrow
button to select , and press the button to enter
the menu.
2. Press the up/down arrow button to select , and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select
Date & Timeand press the button or right
arrow button to enter the menu.
4. Press the left/right arrow button to select the Date/
Time to be adjusted: Time is displayed in YYYY.
MM.DD HH:MM.
5. Press the up/down arrow button to press the value
for your selected block. After you finish your settings,
press the button to confirm.
6. Press the button and the following snapshot
screen appears.
22
Press the button to display the settings: Classic,
Full, Off.
Classic: Displays the camera parameters on screen
-0.3
EV
400
ISO
1234
SD
16M
00:56:00
Full: Camera parameters with Grid and Histogram
-0.3
EV
400
ISO
1234
SD
16M
00:56:00
Off: Does not display any additional icons on screen
Display Setting
MODE OVERVIEW
23
LCD Display
Overview of the Screen Icons in Photo Shooting Mode
1234
-0.3
EV
400
ISO
00:56:00
SD
16M
x3.
2
15 sec15 sec
1. Shooting mode
Manual Mode Portrait
Auto Mode Panorama Mode
Anti-shake
Scene Mode
2. Macro mode
3. Zoom display
4. SD memory card/Built-in memory
5. Battery status
6. White balance (Adjustable in mode)
7. Color effect (Adjustable in mode)
8. Number of remaining shots
9. Image size
10. Video quality
11. ISO value (Adjustable in mode)
12. Remaining recording time
13. Exposure compensation (EV value)
(Adjustable in mode)
14. Shutter speed (Adjustable in mode)
15. Histogram
16. Focus frame
17. Eye-Fi ON (with signal)
18. Expo metering
AiAE
Spot
Center
24
1234
-0.3
EV
400
ISO
00:56:00
SD
16M
x3.
2
19. Continuous shot
Single
Continuous Shot
3 Shots
Time Lapse (30sec/1min/5min/10min)
20. AF mode
Single-AF
Multi-AF
21. Flash mode
Force Off
Flash Auto
Fill Flash
Slow Sync.
Slow Sync. + Red-Eye
Red-Eye Reduction
22. Self-timer
Self-timer Off
2 sec
10 sec
Smile
25
Overview of the Screen Icons in Movie Mode
-0.3 EV
00:56:00
SD
x3.
2
00:56:00
1. Movie mode
2. Macro mode
3. Self-timer
Self-timer Off
10 sec
4. Zoom display
5. SD memory card/Built-in memory
6. Battery status
7. Color effect
8. Video quality
9. Remaining recording time
10. Exposure compensation (EV value)
11. Focus frame
12. Eye-Fi ON (with signal)
13. Expo metering
AiAE
Spot
Center
14. AF mode
For optimal video shooting, it is recommended that
an SDHC memory card be used.
Optical Zoom and Digital Zoom can be adjusted
(30X in total). Digital Zoom can be adjusted to 6X .
26
Overview of the Screen Icons in Playback Mode
1/45
201 - :
x2
SD
3
01
01
0
0
0
0
1. DPOF file
2. File protection
3. Memory space (indicating the current number of
photos and total number of photos)
4. SD memory card/Built-in memory
5. Battery status
6. Zoom magnification area
7. Image zoom ratios
8. Image zone
9. Shooting date
10. Eye-Fi ON (with signal)
11. HDR
12. Red-eye reduction
27
Using the Mode Button
This camera provides a convenient mode button that allows you to switch easily between different modes. After pressing
the mode button to enter the mode selection menu, press the left/right arrow button to choose the selected mode. Press
the button to confirm your selection. All the available modes are listed below:
Mode Name Icon Description
Manual Mode Many of the camera settings can be configured manually in this mode.
Auto Mode
In this mode, the optimal conditions for taking pictures will be set based on the subject and
environment. It is the most commonly used mode for taking pictures.
Anti-shake Optical Image Stabilization to take clear pictures in the handheld state.
Portrait The best setting for portrait shooting, enables AE/AF for faces.
Panorama Mode
In this mode, up to 4 frames can be stitched together to create a single panoramic photo.
Scene Mode Choose from 21 different pre-set scene types and effects for your photos.
Movie Mode Record videos.
28
Auto Mode is the easiest mode to take photos. While
operating in this mode, the camera automatically
optimizes numerous camera settings to adjust your
photos and videos for the best possible results.
Follow these steps:
1. Press the button to select Auto Mode ( ).
2. Compose your picture in the LCD and press the
Shutter button halfway down to focus on the subject.
3. The LCD will show a green focus frame when the
subject is in focus.
4. Fully press the shutter button down to take pictures.
Auto Mode Manual Mode
When selecting manual ( ) mode, you can set the EV/
shutter speed manually and ISO value.
1. Press the button to select Manual Mode ,
press button to confirm.
2. Press the left/right arrow button to select an
adjustment setting.
3. Press the up/down arrow button to adjust the
parameters.
4. Press the button to confirm the settings and enter
the shooting screen.
29
This mode can help reduce photo blur caused by hand
shake, low light and slow shutter speed.
Use Stabilization Mode in dark environments or
when using a slower shutter speed.
Shooting in a windy or unstable environment (such
as a moving vehicle) may cause blurred images.
Anti-shake
In Portrait Mode, the camera is set to automatically
adjust exposure for realistic capture of skin tones.
Press the button to select Portrait mode ( ).
Portrait
30
Panorama Mode
Panorama Mode allows you to create a panoramic
picture. The camera will automatically compose a
panoramic picture using the individual shots that you
take.
Follow these easy steps to create a panoramic picture:
1. Press the button to select Panorama Mode ( ).
2. Press the arrow buttons to select a shooting
direction. (The right direction is used as default if you
do not make any choice) 2 seconds later, the camera
is ready to take pictures. You can also press the
button or half press the shutter button to be ready to
take pictures.
3. Compose the first view of the panoramic picture on
the LCD and press the Shutter button to capture the
image.
4. After the first shot is taken, the semi-transparent
image of the first shot will appear at the edge of
the screen. You can use this image to compose
your picture before you press the shutter button to
capture and finish manual stitching.
5. If continuous pictures are less than 4 shots, press
button, the camera will splice the pictures
automatically. Press playback button to enter
playback mode to see the effect.
6. If you take 4 pictures, the camera will splice the
pictures automatically. Press playback button to enter
playback mode to see the effect.
After selecting Panorama Mode, Flash, Self-timer,
Macro Mode and Exposure Compensation cannot
be adjusted.
In Panorama Mode, up to 4 photos can be captured
when the image size is set at 2MP.
Pictures cannot be deleted, nor the zoom adjusted
until the series is finalized.
31
Scene Mode (SCN)
You can select an appropriate mode from the 21 scene modes according to the type of environment you are shooting. The
camera then configures the most appropriate settings automatically.
Press the button to select Scene Mode. The LCD will display a menu like the example below:
Press the arrow buttons to select a scene , and press the button to confirm.
32
Scene Description
Auto Scene
Identifies the scene automatically; Person, Backlighting, Landscape, Macro, Night Scene,
Night Scene Person, Auto.
Landscape For landscapes and outdoor shots. Vivid reproduction of green and blue.
Sport
For fast-moving subjects. Capture sharp, action shots with minimal blur. This mode is not
recommended for shooting indoors.
Beach For taking pictures in areas with strong sunlight.
Sunset For sunsets. Capture subjects in strong sunlight.
Fireworks For fireworks at night. Suggest using tripod.
Night Landscape For night scenes. Suggest using tripod.
Snow For snow scenes. Reproduce natural, clear white scenes.
Children
Turns off flash automatically. Avoids disturbing subject, suitable for taking photos of
children.
ID
For shooting ID size photos. (It is recommended to print using 6-inch 4R (6X4)
photographic paper.)
Glass For objects behind transparent glass.
33
Scene Description
Photo Frame For adding interesting frame effects to the photo.
Panning Shot Suitable for capturing fast moving objects to have a clear subject with a blurred background.
Text For taking pictures of text, documents or white boards.
Fish Eye For interesting fish eye effect.
Party Suitable for taking indoor party pictures, even under the complicated lighting conditions.
Indoor For indoor settings. Reduce blur and improve color accuracy.
Leaf For plants. Capture brilliant shots of greenery and blossoms.
Museum For museums or flash-free areas. Retain color and reduce blur.
Night Portrait For portraits against night scenery.
Sketch For taking photos with pencil sketch effect.
34
Auto Scene Mode (ASCN)
In “ASCN” scene mode, the camera can detect different
environments intelligently and automatically select the
best scene and photo settings for you.
ASCN” can intelligently detect the following scenes:
Icon Mode Name Icon Mode Name
Landscape
Mode
Night Landscape
Mode
Portrait Mode Macro Mode
Night Portrait Auto Mode
Backlit Portrait
To use "ASCN":
1. Press the button to select “SCN” mode, then
select “ASCN” function. LCD will be shown as follows:
2. Hold the camera steadily and aim at the subject. The
optimum scene mode will be selected automatically.
3. Press the shutter button half-way down to focus.
4. Press the shutter button all the way down to take
pictures.
35
Mode Name Description
Landscape Mode
For landscapes, ASCN will automatically adjust the exposure and reproduce vivid
green and blue colors.
Portrait Mode Most suitable for capturing people with focus on their faces.
Night Portrait
When you take portraits at night, or in low light conditions, ASCN will automatically
adjust the exposure for people and night scenes.
Backlit Portrait
When the sun or any other light source is behind you, ASCN will automatically adjust
the foreground exposure to produce the best pictures possible.
Night Landscape Mode
For night scenes, ASCN will automatically increase the ISO value to compensate for
low light.
Macro Mode
To produce more detailed close-ups, ASCN will automatically engage the camera's
Macro Mode and automatically focus the lens.
Auto Mode
The camera will automatically adjust the exposure and focus to ensure the best
possible pictures.
36
Your camera is equipped with two types of zoom
functions: Optical Zoom and Digital Zoom. Press the
Zoom button of the camera to zoom in or out on the
subject while taking pictures.
Using the Zoom Function
BASIC OPERATION
Zoom Indicator
When the Optical Zoom reaches the threshold as Digital
Zoom, release and turn the zoom button to T to switch
between the Optical zoom and Digital zoom.
37
Macro Mode
The Macro Setting is ideal for shooting small objects
or close-up photos. This mode allows you to focus on
subjects very close to the camera.
1. Press the left arrow button ( ) to enter the
Marco Menu.
2. Press the left/right to select the following 2 modes:
Macro Off
Select this option to disable Macro.
Macro On
Select this to focus on subjects 5cm from the
lens.
3. Press the button to confirm the settings and exit
the menu.
38
Self-timer Setting
Use this function to take pictures at pre-set intervals.
The camera shutter speed can be set for 2 seconds, 10
seconds or by smile detection.
1. Press the left arrow button ( ) , and then press
the down button ( ) to enter the Self-timer menu.
2. Press left/right to select the following 4 modes:
Self-timer Off
Disables the Self-timer.
Self-timer 2sec
A single picture is shot 2 seconds after the
Shutter Button is pressed.
Self-timer 10sec
A single picture is shot 10 seconds after the
Shutter Button is pressed.
Self-timer Smile
Press the Shutter Button and a picture
will be taken immediately after a smile is
detected.
3. Press the button to confirm the settings and exit
the menu.
39
Flash Mode
The Flash is used to illuminate a subject in low light or for
fill-in lighting to achieve better illumination of a subject
with pronounced shadows.
1. Press the right arrow button ( ) to enter the Flash
Settings Menu.
2. Press the left/right to select the following 6 modes:
Force Off
Flash is turned off.
Flash Auto
Camera flash goes off automatically based
on existing light conditions.
Fill Flash
The flash will engage with each shot even
if there is enough available light to take the
photo without flash.
Slow Sync.
This allows for night scenery photos that
include people in the foreground. The use
of a tripod is recommended when shooting
with this setting.
Slow Sync. + Red-Eye
Use this mode for slow synchro shots with
red-eye reduction.
Red-Eye Reduction
The camera emits a brief pre-flash before
the picture is taken to reduce red-eye
effects.
3. Press the button to confirm the settings and exit
the option.
40
EV Setting
The EV function menu of the camera includes functions,
such as EV, shutter adjustment, ISO. Using the
appropriate function settings can improve your pictures.
To select the best setting for optimum photos, follow
these steps:
1. Press the button to display the settings screen.
2. Press the left/right arrow button to select the setting
options.
3. Press the up/down arrow button to adjust the option
values.
4. Press button to complete the setting and enter
shooting mode.
Exposure Compensation
Set up to adjust the picture brightness. In the case of
a very high contrast between the photographed object
and the background, the brightness of the picture can be
appropriately adjusted. (Adjustable in mode)
The adjustable range of exposure value is from EV -2.0
to EV+2.0.
41
ISO
The ISO function allows you to set the sensitivity of the
camera's light sensor based on the brightness of the
scene. To improve the camera's sensor performance
in darker environments, a higher ISO value is required.
A lower ISO value is needed when shooting in brighter
conditions.
Pictures taken at higher ISO settings will generally have
more noise than those taken at lower ISO settings.
(Adjustable in mode)
The camera's ISO settings include: automatic, 80, 100,
200, 400, 800 and 1600.
Shutter Adjustment
You can adjust the shutter speed value. Selecting a
higher shutter speed will capture fast moving objects
more clearly. Selecting a slower shutter speed will result
in some motion blur of moving objects. (Adjustable in
mode)
42
Using Quick Recording
In shooting mode, press the fast video recording button to begin recording video.
After finishing, press the fast video recording button or the Shutter Button to stop and store the video. The camera
will return to shooting mode automatically.
43
Viewing Photos and Videos
PLAYBACK
To view the captured photos and video clips on the LCD:
1. After pressing the button, the last photo or video clip taken will be displayed on the LCD.
2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or on
the SD memory card.
3. To play a selected video clip, press the button to enter the Movie Playback Mode.
During video playback, the operating instructions will appear on the screen. Press the arrow buttons, and press the
button to engage the following actions:
00:00:47 00:01:23
00:00:47 00:01:23
1 Increase Volume
2 Pause
3 Fast Forward
4 Decrease Volume
5 Rewind
6 Back to the beginning of the video
7 Play
8 Play video forward
9 Cancel playback
10 Play video backward
Mute
44
Thumbnail View
When in playback mode, press on the zoom button to display thumbnail images of photos and videos on the screen.
1. Slide the zoom button to switch between 3x3 and 4x4 thumbnails.
2. When a 3x3 or 4x4 thumbnail is displayed, press the arrow buttons to select a picture or video clip to view.
3. Press the arrow buttons to select a picture or video clip to view and press the button to restore it to the original
size.
If the indicator appears on the LCD, then a movie file is currently being displayed.
Press the button to restore a preview icon to its original image size.
45
Using Zoom Playback (for still pictures only)
When playing back photos, you can also use the zoom button to zoom in on the photos 2 to 8 times.
1. Press the left/right arrow button to select a picture to be zoomed in.
2. Press the ( ) on the zoom button to zoom in.
3. The bottom right corner of the screen will display the number of times and area of the photo zooming operation.
4. Press the arrow buttons to navigate and select a part of the image to be zoomed in.
5. Press the button to return the image to its original scale.
Movie images cannot be magnified.
46
This setting allows you to view all the stored pictures as a slideshow.
1. Press button to enter playback screen.
2. Press button to enter slide option.
3. Press the left/right arrow button to select slideshow playing or Cancel to return to the playback screen.
4. Press the button to confirm the setting.
Slideshow
47
Photos and Video Deletion
In playback mode, press the down arrow button ( ) to select your photos and videos.
To delete photos or videos:
1. Press the button to switch to playback mode.
2. Press the left/right arrow button to select the photos and videos to be deleted.
3. Press the down arrow button ( ) and the deletion screen is displayed.
4. Press the up/down arrow button to selectDelete OneorExitand press the button to confirm.
Erased photos/video clips cannot be recovered.
Please refer to page 65 for instructions on deleting more than one image at a time.
48
Photo Setup Menu
USING THE MENUS
Mode:
1. In Photo Shooting Mode, press the button to enter
the Photo Shooting Menu.
2. Press the up/down arrow button to select the Photo
Shooting Menu to be set.
3. Press the left/right arrow button to select the Photo
Shooting Menu to be set and press the button to
confirm.
Refer to the following pages for more details about each
setting.
Expo Metering (Exposure Metering)
Use this setting to select the "target" size of the camera's
field of view to be metered.
There are 3 options:
AiAE (Artificial Intelligence AE): For
automatically selecting the central and
surrounding metering to weight a proper
metering value.
Spot: For metering the block displayed in the
center of the screen.
Center: For metering the object in the center of
the screen.
49
Image Size
The size setting refers to the image resolution in pixels. A
higher image resolution allows you to print that image in
larger sizes without degrading the image quality.
The bigger the number of recorded pixels is, the
better the image quality becomes. As the number
of recorded pixels lessen, you will be able to record
more images on a memory card.
Cont. AF
Enable the continuous AF to be able to continuously
focus automatically when taking pictures.
There are 2 options:
Off
On
50
Continuous Shot
Use this setting to perform continuous shooting. After
entering this mode, you can shoot multiple images by
continuously holding the shutter button down.
There are 7 options:
Single
Continuous Shot
3 Shots
Time-Lapse 30sec
Time-Lapse 1min
Time-Lapse 5min
Time-Lapse 10min
In Continuous Shot mode, the flash is automatically
set to Force Off in order to achieve quick
succession of shots.
Press the shutter button to start continuous
shooting.
51
Focus Setting
This setting allows you to select different modes for
optimum focus.
There are 2 options:
Single-AF: The focus frame appears on the
center of the LCD to focus on the subject.
Multi-AF: The camera automatically focuses
the subject in a wide area to find the focus
point.
White Balance Setting
The White Balance Setting allows you to adjust the color
temperature for different lighting sources to ensure the
most accurate color reproduction.
There are 7 options:
52
AWB
Daylight
Cloudy
Fluorescent
Fluorescent CWF
Incandescent
Manual WB (Fully press the shutter button
to detect the white balance value)
Color Effect
The Image Color Setting allows you to select different
color effects.
1. Press the button to select the Image Color
Setting Menu.
2. Press the left/right arrow button to select the Image
Color Setting options.
There are 4 options:
Normal
Vivid
Sepia
Black and White
53
• Shooting menu in the shooting mode (O: Optional X: Not optional)
Options
Shooting Modes
O O O O X O
O O X O X O
O O X O X X
O O X O X X
O O X X X X
O X X X X X
O X X X X X
X X X X X O
54
Mode:
1. Press the button in Photo Shooting Mode and
press the up/down arrow button to select .
2. Press the button to enter the menu.
3. Press up/down arrow button to select , and press
the button or right arrow button to enter the
menu.
4. Press the up/down arrow button to select the item to
be set and press the button or right arrow button
to enter the menu.
5. Press the up/down arrow buttons to select an option
and press the button to confirm.
Photo Shooting Setting Menu
Quality
The Quality Setting can be used to adjust the image
compression ratio.
There are three options for picture quality:
Best (16M Average File Size: 4.0MB)
Fine (16M Average File Size: 2.5MB)
Normal (16M Average File Size: 2.0MB)
55
AF Assist Beam
In a darker environment, AF Assist Beam can be turned
on for better focus.
Digital Zoom
This setting is for adjusting digital zoom. If this function
is disabled, only optical zoom can be used.
56
Date Imprint
Include a Date/Time stamp on the photo image.
• Off
Date
• Date / Time
Quick Review
This option allows quick review of the photos
immediately after they are taken. Each photo is displayed
on the LCD based on the selected time.
There are 4 options:
• Off
• 1 sec
• 2 sec
• 3 sec
57
Movie Menu
Mode:
1. Press the button, select the mode and press
the button to enter the Movie Menu.
2. Press the up/down arrow button to select the Movie
Menu to be set.
3. Press the left/right arrow button to select the Movie
Menu to be set and press the button to confirm.
Expo Metering (Exposure Metering)
Use this setting to select the "target" size of the camera's
field of view to be metered.
There are 3 options:
AiAE (Artificial Intelligence AE): For
automatically selecting the central and
surrounding metering to weight a proper
metering value.
Spot: For metering the block displayed in the
center of the screen.
Center: For metering the object in the center of
the screen.
58
Video Quality
Set the image resolution used during video recording.
The speed requirements for reading and writing high
image pixel images to SD card are as follows:
No.
Image Pixel
Frame
Recommen-
dation
Recording
time (4GB)
About
1
1280x720 *
30 Class 4 17 minutes
2
1280x720
15 Class 4
34 minutes
3
640x480
30 Class 4
52 minutes
4
320x240
30 Class 4 207 minutes
* The longest recording time is 29 minutes at one
time.
When recording in higher pixel resolutions for
extended periods of time, this can cause the
camera to generate heat. This is not a camera
malfunction.
Color Effect
The Image Color Setting allows you to select different
color effects.
1. Press the button to select the Image Color Setting
Menu.
2. Press the left/right arrow button to select the Image
Color Setting options.
There are 4 options:
Normal
Vivid
Sepia
Black and White
59
Movie Setting Menu
Mode:
1. Press the button, and select to enter the video
recording screen.
2. Press the button, press the up/down arrow button
to select , and press the button to enter the
menu.
3. Press up/down arrow button to select , and press
the button or right arrow button to enter the
menu.
4. Select the items to be set and press the button or
the right arrow button to enter the menu.
5. Press the up/down arrow buttons to select an option
and press the button to confirm.
Digital Zoom
This setting is for adjusting digital zoom. If this function
is disabled, only optical zoom can be used.
60
Playback Menu
Mode:
1. Press the button to display the playback screen
and press button to enter the menu.
2. Press the up/down arrow button to select the
playback to be set and press button to enter.
3. Press the left/right arrow buttons to select an option
and press the button to confirm.
Refer to the following pages for more details about each
setting.
HDR
With the HDR function, pictures that are overexposed
may be corrected to optimize the highlights and lowlights
captured to more accurately represent the actual scene.
1. In Playback Mode, press the left /right arrow button
to select the photos to be edited.
2. Press the button, select the settings, and
press the button to display the settings screen.
3. Press the left/right arrow button to select whether
HDR is used.
: HDR
: Cancel
4. After using the HDR function, the image will be saved
as a new file and the original file is still stored in the
memory.
61
Rotate
You can use this setting to change the orientation of the
picture.
1. In Playback Mode, press the left /right arrow button
to select the photos to be edited.
2. Press the button, select the settings, and press
the button to display the settings screen.
3. Press the left/right arrow button to select the rotation
direction or Cancel to return to the playback
menu.
: Turn Right
: Turn Left
: Cancel
4. Press the button to confirm the setting.
Videos and panoramic pictures cannot be rotated.
The rotated picture file will replace the original
photo.
Red-Eye Reduction
1. In Playback Mode, press the left /right arrow
button to select the photos to be edited.
2. Press the button, select the settings, and
press the button to display the settings screen.
3. Press the left/right arrow button to select the
corresponding menu or Cancel to return to the
playback screen.
: Red-Eye Reduction
: Cancel
4. Press the button to confirm the setting.
62
Resize
This setting allows you to resize a picture to a particular
resolution and saves it as a new picture.
1. In Playback Mode, press the left /right arrow button
to select the photos to be edited.
2. Press the button, select the settings and press
the button to display the settings screen.
3. Press the left/right arrow button to select
1024X768or640X480or select
Cancel to return to the playback menu.
4. Press the button to confirm the setting.
Color Effect
This setting allows you to change the picture color effect.
The file is saved as a new photo and stored in memory
together with the original photo.
1. In Playback Mode, press the left /right arrow button
to select the photos to be edited.
2. Press the button, select the settings, and
press the button to display the settings screen.
3. Press the left/right arrow button to select the
corresponding menu or Cancel to return to the
playback screen.
4. Press the button to confirm the setting.
: Cancel
: Sepia
: Vivid
: Black and White
63
Playback Setting Menu
Mode:
1. Press the button to show the playback screen,
press the button, and press the up/down arrow
button to select .
2. Press the button to enter the menu.
3. Press up/down arrow button to select , and press
the button or right arrow button to enter the
menu.
4. Press the up/down arrow button to select the item to
be set and press the button or right arrow button
to enter the menu.
5. Press the up/down arrow buttons to select an option
and press the button to confirm.
Refer to the following pages for more details about each
setting.
64
2. Press the up/down arrow button to select the sub-
menu and press the button or right arrow button
to show the settings screen.
There are 3 sub menus available:
• One: Lock the selected photo or video
if they are unprotected; unlock
the selected photo or video if
they are protected.
• All: Lock all photos or videos.
• Reset: Cancel all locked photos or
videos.
3. Press the up/down arrow buttons to select an
option and press the button to confirm.
Protect
To prevent any pictures or videos from being accidentally
erased, use this setting to lock one or all of the files.
To lock or unlock the photo and video files:
1. Press the up/down arrow button to select
Protectand press the button or right arrow
button to enter the sub-menu.
65
Delete
You can delete one or all photo/video files.
To delete photo or video files:
1. Press the up/down arrow button to select
Deleteand press the button or right arrow
button to enter the submenu.
2. Press the up/down arrow button to select the
submenu and press the button or right arrow
button to show the settings screen.
There are 2 sub menus available:
• One: Delete one photo or video.
• All: Delete all photos or videos.
3. Press the up/down arrow buttons to select an option
and press the button to confirm.
The “ ” indicator means a file is protected. File
protection must be removed first before a file can
be deleted.
Deleting files will cause DPOF settings to be reset.
66
Trim
The Trim Setting allows you to crop photos and save
them as new pictures.
1. Press the up/down arrow button to selectTrim
and press the button or right arrow button to
enter the menu.
2. SelectYesto confirm trim. Select a part to be
trimmed using the zoom button and arrow buttons to
trim a photo.
3. Press the button and theSave change?prompt
appears. Select to change and save the
picture. Select to cancel changes and return
to the trim prompt screen.
The image cannot be clipped/trimmed again once
it has been clipped to 640X480.
DPOF (Digital Print Order Format)
The DPOF feature allows you to compile and select a
group of pictures that you would like to print and will
save your selection on the memory card so that you
can use the SD memory card to print without having to
individually specify the photos you want to print.
The printer that supports DPOF is needed for
printing.
67
Setup Menu
Mode :
1. Press the button in any mode and press the up/
down arrow button to select .
2. Press the button to enter the menu.
3. Press up/down arrow button to select , and press
the button or right arrow button to enter the
menu.
4. Press the up/down arrow button to select the item to
be set and press the button or right arrow button
to enter the menu.
5. Press the up/down arrow buttons to select an option
and press the button to confirm.
Refer to the following pages for more details about each
setting.
68
Sound Settings
To change this setting:
1. SelectSound Settingsin the basic settings menu.
Press the button or right arrow button to enter the
menu.
2. Press the left/right arrow button to select an option.
3. Press the button to confirm.
Power Saver
This setting allows you to save power and get the
maximum possible running time for your camera's
batteries. Follow the steps below to turn the LCD and
camera off automatically after a consecutive period of
inactivity.
1. SelectPower Saverin the basic settings menu.
Press the button or right arrow button to enter the
menu.
2. Press the up/down arrow button to select an option.
3. Press the button to confirm.
69
Language
Refer to the “Reset your language” section on page 20.
Zone
The Zone setting is a useful function for your overseas
trips. This feature enables you to display the local time
on the LCD while you are abroad.
1. SelectWorld Timein the basic settings menu.
The World Time screen appears.
2. Press the up/down to select the departure place
( ) and destination ( ) fields.
3. Press the left/right arrow button to select a city
located in the same time zone as that of the field.
Press the button to confirm settings.
Date/Time
Refer to the “Reset Date/Time” section on page 21.
70
File / Software
5. If you selectYesthe camera formats its memory.
If there is no memory card in the camera, the
built-in memory will be formatted; if there is a
memory card, it will be formatted only.
Format Memory
Please note: formatting enables you to delete all contents
in the memory card and built-in memory, including
protected photo and movie files.
To use this setting:
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select Format
and press the button or right arrow button to enter
the menu.
4. Press the up/down arrow buttons to selectYes
orNoand press the button to confirm.
71
Copy to Card
Use this setting to copy the files stored in the internal
memory to an SD memory card.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select
Copy to Cardand press the button or right
arrow button to enter the menu.
4. Press the up/down arrow buttons to selectYes
orNoand press the button to confirm.
If there is no card available in the camera, this
function will not be displayed.
File Numbering
After you take a picture or video clip, the camera will
save it with a sequential number. You can use this to
reset the file numbering to 1.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to selectFile
Numberingand press the button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to selectYes
orNoand press the button to confirm.
72
FW Version
Use this setting to view the current camera firmware
version.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to selectFW
Versionand press the button or right arrow
button to enter the menu.
4. When there is a new firmware version in the SD card,
selectYesto update.
Reset
Use this setting to restore the camera to its original
factory default settings.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select Reset
and press the button or right arrow button to enter
the menu.
4. Press the up/down arrow buttons to selectYes
orNoand press the button to confirm.
73
3. Press the up/down arrow button to selectUSB
and press the button or right arrow button to enter
the menu.
4. Press the up/down arrow buttons to selectPCand
press the button to confirm.
Connecting to a Computer
You can use a micro USB cable to connect the camera
and copy (transmit) photos to a computer, printer or
other device.
Setting the USB Mode
The camera’s micro USB port can be set to connect
with either a computer or a printer. The following steps
will allow you to ensure that the camera is correctly
configured to connect with a PC.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
CONNECTIONS
74
4. After the transmission is complete, disconnect
the micro USB cable according to the instructions
specifying how to safely remove USB devices.
Transferring files to your computer
The computer will automatically detect the camera as
a removable drive. Double-click the My Computer icon
on the desktop to locate the removable drive and to
copy folders and files in the drive to a directory on your
PC as you would copy any typical folder or file.
Follow the steps below to connect the camera to a
computer.
1. Make sure both the camera and computer are
turned on.
2. Connect one end of the supplied micro USB cable to
the micro USB port on your camera.
3. Connect the other end of the cable to an available
USB port on your computer.
75
Video System
You can use the AV cable (which should be purchased
separately) to connect the camera and the television for
realizing the video output. Connect one end of the AV
cable to AV port of the camera, connect the other end to
AV-OUT port of the television. Adjust the format of the
video output system according to your requirements, and
the steps are as follows:
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select
TV-Systemand press the button or right
arrow button to enter the menu.
4. Press the up/down arrow buttons to select NTSC
orPALand press the button to confirm.
The video output system would change accordingly
based upon the changes of the selected language.
NTSC: English, Chinese (Traditional), Japanese,
French, Korean, Russian, Vietnamese,
Greek, Hungarian
PAL: German, Spanish, Italian, Chinese
(Simplified), Portuguese, Swedish, Danish,
Finnish, Indonesia, Norwegian, Dutch,
Turkish, Polish, Thai, Croatian, Czech,
Arabic, Hindi
76
This camera supports wireless connection of an Eye-Fi
SD Card. Upload the photos from the camera to the
Internet using the following steps:
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to selectEye-Fi
and press the button or right arrow button to enter
the menu.
4. Press the up/down arrow buttons to selectOn
orOffand press the button to confirm.
Set Eye-Fi SD Card Connection Mode
If the Eye-Fi card is not available in the camera, this
feature is not displayed.
77
Connecting to a PictBridge Compatible Printer
PictBridge technology allows printing of the
photos saved in the memory card by the
printer.
To find out if a printer is PictBridge
compatible, simply look for the PictBridge
logo on the packaging or check the owner's manual for
specifications. With the PictBridge function on your
camera, you can print the captured photos directly to a
PictBridge compatible printer using the supplied micro
USB cable, without the need for a PC.
Setting the USB Mode
The camera’s micro USB port can be set to connect with
either a PC or a Printer, the following steps will ensure
that the camera is correctly configured to connect with
a Printer.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to selectUSB
and press the button or right arrow button to enter
the menu.
4. Press the up/down arrow buttons to select
Printerand press the button to confirm.
After the camera is reset, it will switch to PC mode
automatically from USB mode.
See “PictBridge“ section on page 79.
78
Connecting to your Printer
1. Make sure both the camera and printer are turned on.
2. Connect one end of the supplied micro USB cable to
the micro USB port on your camera.
3. Connect the other end of the cable to the USB port on
the printer.
If the camera is not connected to a PictBridge compatible
printer, the following error message will appear on the
LCD.
The error message above will also appear if the
USB mode is set incorrectly, in which case you
should disconnect the micro USB cable, check
the USB mode settings, ensure that the Printer is
turned on, and then try connecting the micro USB
cable again.
79
Using the PictBridge Menu
After setting the USB mode to Printer, the PictBridge
Menu will appear.
Press the up/down arrow button to select a menu item
and press the button or right arrow button to enter
the item.
Refer to the following sections for more detailed
information on each setting.
Print (with Date)
If you have set the date and time on your camera, the
date and time will be recorded and saved with each
photo you take.
1. In the PictBridge menu, selectPrint (with Date)
and the screen as shown below appears.
2. Press the left/right arrow button to select a photo to
be printed.
80
3. Press the up/down arrow button to select the number
of copies for the currently displayed photo.
4. Press the button and the following screen will
appear.
5. SelectYesand press the button to confirm;
selectCancelto cancel printing.
Print (without Date)
Use this setting to print the photos without dates on
them.
1. In the PictBridge menu, selectPrint (without Date)
and the screen as shown below appears.
2. Press the left/right arrow button to select a photo to
be printed.
3. Press the up/down arrow button to select the number
of copies for the currently displayed photo.
81

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kodak FZ51 - PixPro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kodak FZ51 - PixPro in de taal/talen: Engels als bijlage per email.

De handleiding is 7,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Kodak FZ51 - PixPro

Kodak FZ51 - PixPro Gebruiksaanwijzing - Nederlands - 94 pagina's

Kodak FZ51 - PixPro Gebruiksaanwijzing - Deutsch - 94 pagina's

Kodak FZ51 - PixPro Gebruiksaanwijzing - Français - 94 pagina's

Kodak FZ51 - PixPro Gebruiksaanwijzing - Italiano - pagina's

Kodak FZ51 - PixPro Gebruiksaanwijzing - Espanõl - pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info