584814
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
b. Close the music player/DVD player software if it is running
c. Insert the USB wireless transmitter into a USB port on the computer.
NOTE: If there is interference between the computer case or transmitter can’t
be fully inserted, or if you have other USB devices connected, and the
transmitter will not fit in an adjacent USB port, try a different USB port
or use the included 4" USB extension cable.
NOTE: Does not work with the USB output on gaming systems.
d. The first time the USB transmitter is plugged in, the computer should
recognize the new hardware and install the appropriate driver.
e. When plugged in, the LED on USB transmitter should begin to flash.
3. After several seconds the LEDs on both the subwoofer rear panel and USB
transmitter should stop flashing
a. The LEDs should remain on – this indicates that the USB transmitter and
subwoofer are now synchronized and audio from the computer is streaming to
the ProMedia 2.1 Wireless system.
b. The USB wireless transmitter and subwoofer are paired at the factory,
however if after 30 seconds the LEDs are still flashing, press the “SYNC” button
on the rear of the subwoofer and the button (with the chevron) on the USB
transmitter. The system will attempt to sync again.
4. If you are running Windows, open Control Panel, Sounds and Audio Devices,
Audio tab, and check to make sure that “Klipsch ProMedia 2.1 Wireless” is
listed as the default audio playback device.
5. If you are running a Mac OS, click the Apple icon, select System Preferences,
Sound, Output tab, and check to make sure the “Klipsch ProMedia 2.1
Wireless” is selected as the default output device.
6. Start the Music Player/DVD Player software (i.e. iTunes, Windows Media Player,
etc.) and play your music as normal.
NOTE: When removing the USB transmitter the computer should revert back to
the computer’s built-in sound output device (the laptop’s built-in speaker
or headphone output, for example). It may be necessary to close and
restart the music player software for the change to take effect. Likewise
when plugging in the USB transmitter, the Klipsch ProMedia 2.1 Wireless
speakers should become the default output device, but the music player
software may need to be restarted.
This is not a problem with the Klipsch system; it is a limitation of the computer’s
software and operating system.
If after restarting the music player/DVD player software the music does not play
through the ProMedia 2.1 Wireless system, check to make sure the LED indica-
tors are on but not blinking, and that the operating system, as described above in
#4 and #5 has the Klipsch speakers selected as the active audio output device.
Also check that the computer’s volume control is not muted.
SOFTWARE AND HARDWARE GAIN CONTROLS
Software volume controls in Microsoft Windows
1. Click the Start button on your taskbar, then "All Programs"
2. Choose Accessories
3. Windows 95: Choose Multimedia
Windows 98/2000/XP/Vista: Choose Entertainment
4. Click on the Volume Control
5. Adjust the Wave Volume Elevator Button to approximately 70%
Alternatively, if your computer is not within arms reach of the speakers, you
may desire to set the volume setting higher on the Control Pod and use the
computer’s volume control to adjust the sound level. An initial setting of the
main volume of 11 to 12 o’clock is recommended. Adjustments may be needed
for best sound quality.
Volume Control Programs
Some soundcard and/or PC manufacturers may have software that must be
adjusted separately from the Windows volume control. Consult applicable
manual for specific hardware documentation.
Subwoofer Level
For CD or DVD output, the optimum position will be indicated by the mark at 10
o’clock on the sub level control. Optimum sub levels and user preference may
vary from source to source.
CONTROL POD FEATURES
Headphones: The 1/8” stereo headphone output jack, located on the
right-hand side of the control pod, turns off the two satellite speakers and the
subwoofer output. The main volume control will adjust the headphone output.
MP3/Aux: The MP3/Auxiliary input jack is used with portable audio players. This
signal will be mixed with the main source. The input has a +6dB input sensitivity
to help compensate for the lower output voltage of some portable players. If
using a computer output on the Aux Input you may need to compensate for
the additional gain by lowering the computer’s volume level to approximately
50%. To obtain the proper balance with the main signal, the level adjustments
in the computer software and in the portable player will need to be adjusted. An
example would be listening to an MP3 player while surfing the net and hearing
associated sounds from various websites. The mixed sound may not be desirable,
and you will ultimately determine how you use this feature.
NOTE: During playback of MP3s, overall sound quality may be perceptibly
degraded compared to other audio sources such as CD. This is caused by the
encoding method and quality of the MP3 file. It is recommended that MP3 files
be encoded at a minimum 128 bit rate.
SPECIFICATIONS
(Visit www.klipsch.com for more details)
Satellite Impedance: 4 ohms minimum
Preamplifier Control Pod: Subwoofer and Main volume level controls
LED power indicator
MP3/Aux player line input with soundcard
mixing function
Headphone jack
Direct path interface
Satellite: Sealed elliptical two-way enclosure
with 25mm polymer tweeter mated to
MicroTractrix™ Horn and
3" long-throw mid-bass driver
Subwoofer: Bass-reflex enclosure with front port
and side-firing 6.5" long-throw driver;
sixth-order enclosure design
Amplifier: High-efciency power supply and linear
amplifiers designed for uncompressed full
power sound
Subwoofer Limiter: Protective limiter function protects the
driver and amplifier from extremely high
volume playback
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klipsch ProMedia 2.1 Wireless bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klipsch ProMedia 2.1 Wireless in de taal/talen: Engels als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info