756160
73
Verklein
Vergroot
Pagina terug
1/296
Pagina verder
73
EN
SLEEP (Sleep Mode)
When you press this button, you can select Sleep1( ), Sleep2 ( ), Sleep3 ( )
and Sleep OFF. Press this button several times to select the desired prole.
Sleep1: In cooling mode, when sleep function 1 is activated, the temperature of the
air conditioner is increased by 1 °C after one hour running time. After two hours of
operation, the temperature is increased by a further 2 °C. The unit then continues to run
permanently at this temperature. In cooling mode, when sleep function 1 is activated,
the set temperature is reduced by 1 °C after one hour running time. After two hours of
operation, the set temperature is lowered by a further 2 °C. The device then continues
operation with this temperature setting.
Sleep2: In this mode, the unit runs according to the default setting of a group of sleep
temperature curves.
Sleep3: In this mode, all settings can be made by the user.
1 At this time, the remote control time display shows [1 HOUR] and the corresponding
temperature of the last set sleep curve is displayed on the screen and ashes (the
rst time the unit is used, the factory preset initial value of the sleep curve setting is
displayed).
2 Adjust the temperature by pressing the ARROW buttons and conrm your selection
by pressing the TURBO button.
3 At this time, the time position of the remote control is automatically increased by
one hour (this means: 2 HOUR, 3 HOUR , ...to 8 HOUR), the temperature display
shows the corresponding temperature of the last set sleep curve and ashes.
4 Repeat steps 2 and 3 until the temperature setting has been made for the entire 8
hours and the sleep curve setting has been completed. The remote control display
will then return to the original settings.
If you want to use an individualised setting for the sleep curve setting but do not want to
change the temperature, press the TURBO button to continue switching.
Note: If no button is pressed within 10 seconds, the sleep curve setting is
automatically cancelled and the original settings are displayed. If you wish to cancel
the sleep curve setting, you can do so by pressing one of the POWER, MODE, TIMER
and SLEEP buttons.
73

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klarstein Windwaker Eco 10033601 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klarstein Windwaker Eco 10033601 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info