778317
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
6
Special Safety Notes
As there is the risk of burns, always close the lid and lock it properly when you are going to turn the kettle on.
Never open the lid while hot water is inside and /or the steam density is too high.
Before switching on the kettle ensure that the water level is between 0.5 and 1.8 liter marks only.
There is a cut-off device that works if the kettle is overheated. It switches the kettle off when there is no
water inside or the water level is too low. Wait until the kettle cools down completely to start boiling after the
cut-off device was activated. The kettle will not turn on while too hot. Before switching on the kettle always
check that there is water inside the kettle and the water level is not too low.
Fill the kettle with cold water only.
Switch the kettle off before removing it from the base.
The kettle must be used only with the base provided.
If the kettle is overfilled, boiling water may be ejected.
Operation
NOTE: Boil and pour away water several times before using for the first time. See recommendations below on
how to operate the kettle.
1. Place the kettle with its base on a dry, smooth and flat horizontal surface. Place the kettle on heat resistant
surfaces only.
2. Take the kettle from the base, open the lid and fill the kettle with cold water.
3. Make sure that the water level is between the minimum and maximum marks on the water level scale. Do
not switch on the kettle when empty.
4. Check and correct the filters position before boiling the water.
5. Close the lid and place the kettle back on the base.
6. Plug to AC outlet with the voltage corresponded to the information on the product label.
7. Switch the kettle on by the on/off switch. The illumination light will go on showing that the water is being
boiled.
8. When pouring out the water incline the kettle slightly and gradually. Do not forget that hot water is inside.
Cleaning and Care
1. Unplug the kettle and wait until it cools down completely before cleaning or storing.
2. To avoid the risk of electric shock, do not clean the exterior of the unit, its base or its power cord with water,
and do not immerse it in water. The exterior of the kettle may be cleaned with a slightly damp non-abrasive
lint-free cloth without additives.
3. The filter may be removed for cleaning purposes. To do this, place the filter vertically, pull upwards and draw
out. Wash the outside of the filter in the water flow.
4. Refit all parts when they are completely dry.
5. In the hard water area, it is important to do the decalcification regularly to keep the kettle in good working
condition, because too much scale inside may cause the kettle fail to work. For the best performance of your
kettle, decalcify the unit from time to time. The frequency depends on the hardness of your tap water and
how many times you have used the kettle. Decalcification will clean the interior of the unit.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klarstein 10029860 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klarstein 10029860 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1.01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info