The time remaining can also be changed by
pressing the clock symbol button (4) at any time
and using the +/- buttons (3) to alter the time. The
light above the display will flash for 10 seconds,
then the display will show the amended time
remaining. When the programmed time expires a
continuous double signal will be heard. If a zone
has been programmed using the timer option when
the time expires the zone and the zone indicator
will automatically switch off. You do not have to
select a power level when using the timer option.
the timer is activated by pressing the clock button
(4). The timer option can be set on the induction
zone that is not being used.
The Lo: heat maintaining function is used to
keep already cooked food hot. It can be selected in
both cooking zones and is accessed via the button -
(3), starting from level 1. The Lo function can be
set for up to 120 min.
P or fast boil: a function that sets a higher power
level than maximum (level 10), to quickly bring
water to a boil. It is accessed via the button + (3),
increasing the setting above level 10.
The function can be used not more than twice
in 60 minutes of using the product, for each
cooking zone.
Attention: For safety reasons the fast boil
function remains active for 5 minutes, after
which the control automatically reduces the
power level to 10.
Attention: When using the Fast Boil function (P)
and high power levels in general, the appliance may
be noisy.
Indication of residual heat. After turning the
ring off, an “H” will be displayed until the
temperature of the hob falls to an acceptable
temperature, usually below 65°C.
IMPORTANT: the hob’s safety equipment
includes an automatic shut off function. Prolonged
use of the same power setting will switch off the
induction zone (for example after about 2 hours at
maximum power level, the zone will turn off).
IMPORTANT: do not use pots or pans with a
diameter greater than 14 cm on the induction
rings.
When cooking using high quantities of water, use of
the gas burners is recommended.
Please read all the instructions carefully and
keep them in a safe place.
Induction zone functions
Position the pan supports by inserting them
in the slot inside the gas ring. To use the
wok support provided, position it as shown
in the diagram.
Positioning the pan supports and Wok support
10
