Always disconnect the power supply before carrying out any kind of maintenance work.
Cleaning
The hood should be cleaned regularly both inside and out (at least as often as you carry out maintenance
on the grease filters).
Use a damp cloth with mild cleaning products.
Avoid using harsh products.
DO NOT USE ALCOHOL!
Warning: Failure to follow the cleaning
instructions on the hood and the replacement
and cleaning of the filters, can lead to a
significant fire risk. Please, therefore, follow
the instructions given carefully.
Maintenance of the perimetric suction panel.
Fig. 10
Warning! Hold the panel with both hands
when dismantling or re-fitting it to ensure it
does not fall and harm people or damage
objects.
Dismantling:
Pull the panel (FRONT SIDE) downwards and
release it from the back hinges by unscrewing the
fastening elements with a flat screwdriver and
pulling on it sideways.
Cleaning:
The suction panel should be cleaned as regularly as
the grease filter, using a damp cloth and mild
cleaning products.
Avoid using harsh products. DO NOT USE
ALCOHOL!
Assembly:
The panel should be hooked on the back by
tightening the fastening elements, while the front
should be locked to the purposely fitted pins on
the surface of the extractor hood.
Warning! Always check that the panel is fitted
properly.
Grease filter
It should be cleaned by hand once a month with
mild cleaning products, or in the dishwasher at a
low temperature and on the short cycle.
When washing in the dishwasher, the metallic
grease filter might discolour but its filtering abilities
remain unchanged.
In order to dismantle the grease filter, pull the
spring handle to unhook it. Fig. 11
Maintenance
12
