5
Declaration of conformity
• This appliance has been designed for preserving food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
• This appliance has been designed, manufactured and marketed in compliance with:
- safety objectives of the "Low Voltage" Directive 2006/95/CE (which replaces 73/23/CEE and
subsequent amendments);
- the protection requirements of Directive "EMC" 2004/108/EC.
Electrical safety of the appliance can only be guaranteed if it is correctly connected to an approved
earthing system.
Safeguarding the environment
Failure to follow the instructions regarding sanitizing can compromise the hygienic safety of
the water dispensed.
• When using the appliance for the first time and every time the filter is changed, discard the first 9-14
litres of water, equivalent to 6-7 minutes of dispensing (not necessarily consecutive, but before initial
consumption) and discard the ice produced in the first 24 hours.
• If the water dispenser has not been used for more than 4/5 days, it is advisable to clean the circuit and
run off the first litre of water.
• Reposition the removable water dispenser (if present), ensuring your hands are hygienically clean.
• Clean the ice bucket or drawer regularly but using only drinking water.
• The filter must be changed when indicated on the control panel or when the ice/water dispenser has not
been used for more than 30 days.
• With each filter replacement, sanitise the ice and/or water distribution system using a food grade
disinfectant (with sodium hypochlorite), which does not alter the characteristics of the materials, or use
the "Sanitising Kit" available from the After-Sales Service. Rinse with at least 2 litres of water before
use.
• Only original spare parts supplied by the manufacturer should be used when replacing components in the
ice and water dispenser.
• Any work on the appliance must be carried out by a qualified technician or the After-sales Service.
Cleaning, sanitization and maintenance of the ice and/or
water dispenser (if present)
