8
What to do if… Possible causes Solutions
The red Blackout
Alarm LED and the
freezer
temperature display
are blinking, and the
acoustic signal is
sounding (if
provided).
Blackout Alarm. This alarm activates
when there has been an extended power
failure causing the freezer compartment
temperature to rise. The value flashing on
the freezer display is the highest
temperature reached during the power
failure.
Press the mute alarm button to switch off
the acoustic signal. Check the state of
foodstuffs before consuming them.
This alarm may be activated when the
appliance is used for the first time.
Press the mute alarm button to switch off
the acoustic signal. The appliance needs
approximately 2-3 hours to reach the
correct temperature to store a normal
fridge load of food.
The "Anti-bacterial
filter" symbol is red
and/or is blinking.
Anti-bacterial filter exhausted
(if installed).
Replace the filter (see the Quick Start
Guide).
The "Water filter"
symbol has changed
colour.
Water filter running out/exhausted
(where provided).
Replace the filter (see the Quick Start
Guide). To replace the filter, refer to the
Instructions for Use.
If the appliance has a water and ice dispenser:
The automatic ice-
maker does not
work.
A new appliance takes about a night to
reach the ideal temperature for producing
ice.
Wait for the time required for the
temperature inside the freezer to reach
the set value.
The automatic ice maker may not be
enabled (in some models it can be
disabled).
Refer to the Quick Start Guide to enable
the automatic ice maker again (on some
models only).
Water may not reach the automatic ice
maker.
Check that the product is connected to
the mains water supply and that the water
tap is open.
The water filter may be clogged or
installed incorrectly.
Refer to the filter installation instructions
to ensure that the filter was installed
correctly and is not clogged. If installation
or clogging is not a problem, call qualified
personnel.
