Installation
Freezer Drawer removal
To avoid possible injury, product, or property damage, you will need
two people to perform the following instructions.
To Remove:
1. Pull the freezer drawer open to it’s full extension.
2. Pull the upper basket out to full extension and lift out to remove.
3. Lift the lower basket straight up and out to remove.
4. On each side rail is a basket cradle with two snap attachments. To
release each cradle, unlatch the snaps by pushing them inward,
away from the side rail system. Lift the cradles off of the rails.
5. Lift top of the drawer front to unhook supports from rail system.
Lift the door front out to remove.
To Install:
1. Pull both rails out to full extension.
2. While supporting the door front, hook supports into tabs located
on inside of the rail.
3. Lower the door front into the final position.
4. Place the basket cradles back onto the side rails.
Align snaps with the slots on the side rails and press each snap
towards the rail until it clicks.
5. With rails pulled out to full extension, lower the basket straight
down into the cradles.
6. Slide the upper basket into freezer. Make sure that rear of basket,
hooks behind rail catch.
22
