7
The controls are located at the top front of the refrigerator compartment.
Control
Initial Control Settings
After plugging the refrigerator in, set the controls.
• Pressing the or pads adjusts the controls to the desired setting.
• The temperature control range for both compartments is 1 through 7 (coldest).
• Set the Freezer control on 4.
• Set the Refrigerator control on 4.
• Let the refrigerator run at least 8 to 12 hours before adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when you
first start the refrigerator, during hot weather and after excessive or lengthy door openings.
Adjusting the Controls
• 24 hours after adding food, you may decide that one or both compartments should be colder or
warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below.
• Except when starting the refrigerator, do not change either control more than one number at a time.
• Allow 24 hours for temperatures to stabilize.
Temperature Control Guide
Touch Temperature Controls (select models)
Refrigerator too warm Set the Refrigerator control to next higher number by
pressing the pad.
Refrigerator too cold Set the Refrigerator control to next lower number by
pressing the pad.
Freezer too warm Set the Freezer control to next higher number by pressing
the pad.
Freezer too cold Set the Freezer control to next lower number by pressing
the pad.
Turn control OFF Press the Refrigerator or freezer pad until a dash (—)
appears in the display.
