19
SETTINGS
Turn the "Functions" knob indicator to "CLOCK" to access a submenu containing five display settings which
can be changed.
Clock
Turn the "Browse" knob to display “CLOCK”. To change the time of day, see the previous paragraph
(SETTING THE TIME).
Brightness
To change the display brightness, proceed as follows:
1. Turn the "Browse" knob to display "BRIGHTNESS".
2. Press button : number 1 appears on the display.
3. Turn the "Browse" knob to increase or decrease brightness and confirm by pressing .
Sound
To activate or deactivate the acoustic signal, proceed as follows:
1. Turn the "Browse" knob to display "SOUND".
2. Press to access the setting (ON/OFF).
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button .
Eco
With the ECO mode selected (ON), the display reduces the brightness, showing the clock when the oven is in
stand-by position for 3 minutes. To view information on the display, simply press a button or turn a knob.
1. Turn the "Browse" knob to display "ECO".
2. Press to access the setting (ON/OFF).
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button .
4. During a cooking function, if the Eco Mode is activated, the cavity lamp will be switched off after 1
minute of cooking and reactivated for each user interaction.
Power
1. To change the power absorption setting, turn the "Functions" knob to "CLOCK" , then select “POWER”
with the browse knob.
2. Press to access the setting
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button .
For further information see the relevant section in INSTALLATION paragraph at page 8.
Language
1. Turn the "Browse" knob to display “LANGUAGE”.
2. Press to access the setting.
3. Turn the "Browse" knob until desired language is displayed then press the confirmation button .
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press and at the same time for at least 3 seconds. When activated, the functions
associated with the buttons are locked and the display shows a key symbol. This function can also be
activated during cooking. To deactivate it, repeat the above procedure. When the key-lock function is
activated, the oven can be switched off by turning the knob to 0 (zero). In this case, however, the
previously selected function will have to be set again.
Instructions for oven use
