11
Cleaning
- do not use absorbent kitchen paper, which can
leave traces of paper and streaks on the disc.
N.B: during prolonged cooking of foods with a
high water content (e.g. pizza, vegetables, etc.)
condensation may form
on the inside of the door and around the seal.
When the oven is cold, dry the inside of the door
with a cloth or sponge.
Accessories:
• Soak the accessories in water with washing up
detergent immediately after use, handling them
with oven gloves if still hot.
• Food residues can be easily removed using a
washing-up brush or sponge.
• Concerning Artisan accessory cleaning please see
"Cleaning".
Cleaning cycle of ovens with pyrolysis
function (if present):
- Do not touch the oven during the pyrolysis
cycle.
- Keep children away from the oven during the
pyrolysis cycle.
- Keep animals away during and after the
pyrolysis cycle.
- Insert the cap of the cavity plug before
running a pyro cycle.
This function burns off spatters produced inside the
oven during cooking at a temperature of approx.
500°C. At this high temperature, the deposits turn
into a light ash which can be easily wiped away with
a damp cloth, once the oven is cool.
Do not select the pyrolysis function after every use,
only when the oven is very dirty or produces smoke
or fumes while preheating or cooking.
• If the oven is installed below a hob, make sure
that all burners or electric hotplates are switched
off during the self-cleaning (pyrolysis) function.
• Remove all accessories before running the
pyrolysis function (also the lateral grids).
• For optimum cleaning of the oven door, remove
the worst soiling with a damp sponge before
using the pyrolytic function.
• Before selecting the pyrolysis function, use a
damp sponge to remove any marks on the round
stainless steel cover of the fan (Twelix Disc) and
from the inside glass of the oven door.
The appliance is equipped with 2 pyrolysis
functions:
1. Energy-saving cycle (PYRO EXPRESS/ECO):
which consumes approximately 25% less energy
than the standard cycle. Select it at regular
intervals (after cooking meat on 2 or 3
consecutive occasions).
2. Standard cycle (PYRO): which is suitable for
cleaning a very dirty oven.
• In any case, after a certain number of uses and
depending on how dirty the oven is, a message on
the oven display advises you to run a self-
cleaning cycle.
N.B: during the pyrolysis function, the oven door
will not open; it will remain locked until the
temperature inside the oven has returned to an
acceptably safe level.
Artisan Accessory Cleaning:
• Internal Electrical Socket: remove the metallic
plug cover; use a humidified sponge to clean the
plug. Do not use metallic and/or sharp tools.
• After every use, allow the steam grid to cool then
clean it preferably while it is still warm in order
to remove built-up dirt and stains caused by food
residues (e.g. food with high sugar content).
Suitable for dishwashing.
• Soak the drip pan in water with washing up
detergent immediately after use, handling them
with oven gloves if still hot. Food residues can be
easily removed using the brush supplied via after
sale service.
Note: after a certain number of uses at high
temperature is naturally a color change of the
heating element, due to the formation of layers of
ferrous oxide aggregates, which do not affect
minimally the functionality and safety of the
component.
Descaling:
Pour in additional cold 800ml of white vinegar and
bring to a level "Max" pouring water at room
temperature. Leave for 6-8 hours, then rinse with
water and remove any residue with a non-abrasive
sponge.
Specific products for cleaning and descaling can be
purchased separately from the After-sales Service.
WARNING
