18
After taking the above course of action, the fault message must be reset. In the majority of cases the
fault is thus eliminated.
RESET: - Press the button.
- Close the door.
- Water drains automatically for up to 1 minute.
- The appliance is now ready to be restarted.
Crockery and cutlery... Possible causes... Solutions...
...are not perfectly clean/have food
residues
• Too little space between dishes
(incorrect arrangement of the
concave items in the rack).
• Arrange crockery so that items do
not touch each other. Concave items
(e.g. bowls, cups) must be arranged
facing downwards in the rack.
• Too little detergent; detergent too
old or incorrectly stored.
• If necessary, use more detergent,
observing the manufacturer’s
indications as regards dosage.
Always store detergent in a dry
place and do not store it for
excessively long periods of time.
• Temperature not high enough for
heavily soiled crockery.
• For heavily soiled crockery, select a
wash program with a higher
temperature (see table of programs).
• Loading of the dishwasher using
lower and upper rack at the same
time with “Half load/Multizone”
option.
• If you select the “Half
load/Multizone” option (if
available), remember to load only
the upper rack or only the lower
rack to increase washing power and
thus obtain optimum wash results.
• Clogged spray arms, dirty filters or
not fitted correctly.
• The spray arms must not be
clogged, the filters must not be
dirty and must be fitted correctly
(see “Maintenance and care“).
• Spray arms stuck impeded by
crockery or cutlery.
• The spray arms must be able to turn
freely and must not be impeded by
crockery or cutlery.
...have deposits: regeneration salt
residue
• Water too hard. • In areas with very hard water, more
regeneration salt needs to be added
(see “How to set water hardness”).
• Salt reservoir cap open. • Close the salt reservoir cap
properly.
• Not enough rinse aid. • If you use a combined action
detergent, try adding more rinse aid.
