HOW TO CHECK/FILL/ADJUST RINSE AID
Not necessary when using a
combined action detergent.
a. How to check the rinse aid level
Check the visual indicator C on the rinse
aid dispenser:
dark = sufficient rinse aid,
clear = add rinse aid. In the case of
appliances with an electric indicator on the
control panel, the rinse aid indicator lamp
lights up red when rinse aid needs to
be added.
b. How to fill the rinse aid dispenser
Open the rinse aid dispenser by pressing the right lever (lever 2) of the dispenser.
Fill the dispenser with rinse aid up to the "max" line (approx. 100 ml).
Shut the lid again.
Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse
aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of
the appliance.
c. How to adjust the rinse aid dosage regulator
The rinse aid dosage can be adjusted to the detergent used. The lower the
setting, the less rinse aid is dispensed (factory setting: position 4).
Press the lever 2 to open the cover.
Using a coin or similar object, turn the arrow to the desired setting.
After adjusting the rinse aid setting, shut the cover again.
If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not
perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have
more difficulty drying and a higher rinse aid setting will not improve the situation.
HOW TO CHECK/FILL/ADJUST SALT
Only use regeneration salt specifically for dishwashers.
a. How to check the salt level
Depending on the model, check the visual indicator . The window on the salt reservoir cap is clear
when salt needs to be added and orange when the
salt present is sufficient. In the case of appliances with an electric indicator on the control panel, the salt
indicator lamp lights up red when salt needs to be added.
b. How to fill the salt container
- Remove the lower rack.
- Turn the salt container cap anti-clockwise to open it.
- When using the dishwasher for the first time, fill the salt container to the rim
with water.
- Using the funnel provided, fill with regeneration salt to the rim (the first time,
min. 1.5 kg/max. 2 kg).
- Stir with the handle of a wooden spoon to help dissolve the salt.
- Close the cap of the salt container by turning it clockwise.
- Reinsert the lower rack.
9
Lever 2 Indicator C
max
