Cleaning the filters
1. Rotate the microfilter counter-clockwise (in the direction of the arrow
“0”) and extract it (E).
2. Remove the wide-mesh filter (F).
3. Remove the fine-mesh filter (G).
4. Clean all filters under running water, paying attention not to bend the
fine-mesh filter.
Check that no impurities are left inside the dishwasher!
5. To reassemble:
insert the wide-mesh filter into the microfilter so it clicks into place.
Insert the fine-mesh filter.
The filter must be fitted under both tabs (H).
Insert the wide-mesh filter / microfilter unit and turn clockwise (in the
direction of the arrow “1”), until the dashed lines on the microfilter
and fine-mesh filter are aligned.
The filter unit must be correctly assembled to ensure good wash
results!
Care and maintenance
10
