ENG
9
The seat pan is not suitable for seats which are only fitted with a 2-point lap
belt. Only use the seat pan on seats that have a 3-point vehicle belt.
We recommend using the seat pan on the rear bench seat in
cars. In vans the seat pan should be mounted on the seat that
has the easiest access in the event of a rescue operation.
4.2 Fitting stages
After looking through the vehicle manual as well as selecting the appropria-
te seat, the seat pan can be fitted in the vehicle as described in the following
section.
Position the seat pan backwards facing the
vehicle seat and turn the carrying frame in
the position of drive operation (fig. 9).
Direct the lap belt of the vehicle’s own 3-
point belt systems through both lap belt gui-
des on the seat pan and let the belt tongue
lock in place. You will hear a clicking noise
(fig. 10). Check that this is locked in place by
pulling on the belt.
